Igpu giving display but dedicated GPU isn't

[tonv]

Hello,
So I recently upgraded my motherboard and CPU, I gave my previous stuff to my friend. Well now he's having trouble because his GPU isn't posting, only the igpu works. He's using a Rx 5600 xt which I've tested it in my system and It works. I tried using a different GPU Rx 580 but It doesn't give a post either. Before inserting the GPU I removed all the drivers using ddu. Both of these cards are working in my system but not on his. I tried swapping the boot drive but nothing changed. I know that the board pcie slot is working since I tested It yesterday. I already tried resetting the bios, cleaned GPU drivers and igpu too, swapped monitors, changing the bios mode on GPU but nothing seems to work. I'd highly appreciate any help on this.
My specs:
Ryzen 5 3600
8gb 2666mhz ddr4
Aorus Elite b550m rev 1.3
Thermaltake Toughpower GF 650w
Friends specs:
i3 9100
8gb 2666mhz ddr4
Gigabyte h310m d2vx si 2.0
Xpg Pylon 650w

It doesn't even goes to the bios, all the time It's black screen and then eventually monitor goes to sleep

The pc does turn on along side with the GPU.

 

[Ruru]

All I can think of is an compatibility issue. Does switching between UEFI/CSM do anything? I'd update the BIOS from your friend's motherboard too.

 

[tonv]

All I can think of is an compatibility issue. Does switching between UEFI/CSM do anything? I'd update the BIOS from your friend's motherboard too.

It's already updated to the latest. I am not sure how to switch between uefi and csm

 

[Ruru]

It's already updated to the latest. I am not sure how to switch between uefi and csm

Should be somewhere in the BIOS, I don't have a modern Gigabyte board on hand so I can't confirm.

 

[QuietBob]

Have you tried using a different cable with the dedicated GPU?

 

[tonv]

Have you tried using a different cable with the dedicated GPU?

Tried it with two different hdmi cables and dvi

 

[QuietBob]

Do you also get a black screen when you select the right input on the monitor? Depending on the monitor setup, it may not detect a cable swap.

 

[tonv]

Do you also get a black screen when you select the right input on the monitor? Depending on the monitor setup, it may not detect a cable swap.

yeah, already tried that. Doesn't work either

 

[bug]

Quick search, someone else pointing the finger at Gigabyte: https://community.amd.com/t5/graphi...nabled-and-discrete-gpu-connected/td-p/509900

Definitely check BIOS settings, default video card, UEFI/CSM... Maybe even look whether the cables are plugged into the right outputs.
Now way this is a PSU issue, a GPU should be able to get into the BIOS even of you disconnect the PCIe power cable.

 

[tonv]

Definitely check BIOS settings, default video card, UEFI/CSM

I'm not sure what I'm suppose to be doing here. I tried resetting the bios too but it just doesn't work with either GPU. Only the igpu is giving display, even if I remove igpu's drivers from ddu or device manager still the dedicated GPU doesn't posts. I also tried using different pcie cables but it doesn't work either

 

[Ruru]

Drivers doesn't affect POSTing since the drivers are loaded when in the operating system.

 

[QuietBob]

That motherboard seems to be some OEM model, Gigabyte doesn't even list it on their website. You said the mobo and CPU was your old combo. Did you try the same GPU that worked in your system in your friend's config? If so, the only difference would be the PSU.

NB: you should only use the cables that came with the power supply.

 

[AnotherReader]

Hello,
So I recently upgraded my motherboard and CPU, I gave my previous stuff to my friend. Well now he's having trouble because his GPU isn't posting, only the igpu works. He's using a Rx 5600 xt which I've tested it in my system and It works. I tried using a different GPU Rx 580 but It doesn't give a post either. Before inserting the GPU I removed all the drivers using ddu. Both of these cards are working in my system but not on his. I tried swapping the boot drive but nothing changed. I know that the board pcie slot is working since I tested It yesterday. I already tried resetting the bios, cleaned GPU drivers and igpu too, swapped monitors, changing the bios mode on GPU but nothing seems to work. I'd highly appreciate any help on this.
My specs:
Ryzen 5 3600
8gb 2666mhz ddr4
Aorus Elite b550m rev 1.3
Thermaltake Toughpower GF 650w
Friends specs:
i3 9100
8gb 2666mhz ddr4
Gigabyte h310m d2vx si 2.0
Xpg Pylon 650w

It doesn't even goes to the bios, all the time It's black screen and then eventually monitor goes to sleep

The pc does turn on along side with the GPU.

What did you use to test the PCIe slot?

 

[tonv]

What did you use to test the PCIe slot?

My friend has an old amd Radeon hd 6450 I used it to test it 3 hours ago. I just gave the mobo and CPU yesterday. It was running without any issues with Rx 580 before I gave it to him

That motherboard seems to be some OEM model, Gigabyte doesn't even list it on their website. You said the mobo and CPU was your old combo. Did you try the same GPU that worked in your system in your friend's config?

Yes, I've tried using my Rx 580 on the config It just doesn't wanna post.

NB: you should only use the cables that came with the power supply.

I'm well aware of that, I meant the second pcie cable that's in the psu

 

[QuietBob]

Yes, I've tried using my Rx 580 on the config It just doesn't wanna post.

All else being equal, the issue points to the PSU. Or maybe the odd motherboard doesn't like a PCIe 4.0 card? You said it worked fine with both a 2.0 and a 3.0 one.

If possible, try testing with a different power supply.

 

[Bill_Bright]

Never heard of XPG Pylon power supplies. That alone doesn't mean anything other than it is not a major name brand. That said, according to their website, the PSU is rated at maximum power at 25°C. Note that most 1/2 way decent supplies are rated at 40°C and the better supplies are rated at 50°C.

For some sort of reference, my ambient (room) temp right now is 74°F (23.33°C) and just typing this (essentially barely above idle loads), my CPU is running at 27°C.

So even if that PSU is working to specs now (and that is not a certainty) I would still suspect it. So I agree with QuietBob and, especially with everything else eliminated, this looks as though it could be a power issue. Since everything inside the case depends on good, clean, stable power, the user must ensure he is providing it.

If nothing else, swapping in a known good PSU will eliminate power as the problem if the problem remains.

 

[Caring1]

Disable CSM.

 

[tonv]

Disable CSM.

tried that, It keeps booting back into bios. The boot drive isn't recognized now

 

[bug]

Disable CSM.

Can't do that without messing with the OS install unfortunately

I do (vaguely) remember something about newer AMD GPUs working only in UEFI mode. But even if that were the case, the RX580 is far too old to be affected by this.

 

[tonv]

hmm, I'll test the psu on my system and see if it boots.