rx580 uefı not boot

[xprs]

hello techpower famıly

I bought a mining ASRock Phantom Gaming D Radeon RX 580 8G OC but there seems to be a problem, it does not open with uefi, for example, it did not work with a320m motherboard but it worked with b550m and h81a ddr3 motherboard.

I will send you my rom file, where can I find the original? I downloaded TechPowerUp vga bios, but gpu clock and memory are not visible, drivers are not loaded.

 

[eidairaman1]

You enable csm on the A320? Anyways get a gpu-z screenshot and a picture of the pn sticker on the card please, also go to advanced tab and get a pic of ram used

 

[xprs]

I can install this driver and play games on the rom loaded on my graphics card that I bought right now.

But since I installed TechPowerUp vga bios, I can't install the driver and I can't play games, I get code:43 error driver update

I'm trying it on a gigabyte b550m motherboard, is it normal for it to work on bus interface 1.1, my 6900xt graphics card works on 4.0 rx580 have a 3.0

And my graphics card's fan is always spinning, it shouldn't spin if I'm not in a game.

 

[eidairaman1]

I can install this driver and play games on the rom loaded on my graphics card that I bought right now.

But since I installed TechPowerUp vga bios, I can't install the driver and I can't play games, I get code:43 error driver update

I'm trying it on a gigabyte b550m motherboard, is it normal for it to work on bus interface 1.1, my 6900xt graphics card works on 4.0 rx580 have a 3.0

And my graphics card's fan is always spinning, it shouldn't spin if I'm not in a game.

Yeah you placed incorrect bios on card is why

Pull the card from system and see if you can identify a ram chip located on the card please with a picture, if you can't, you will need to remove the heatsink, use fresh paste on gpu die that is designed for the gpu, and get a picture of a ram chip please

 

[xprs]

Yeah you placed incorrect bios on card is why

Pull the card from system and see if you can identify a ram chip located on the card please with a picture, if you can't, you will need to remove the heatsink, use fresh paste on gpu die that is designed for the gpu, and get a picture of a ram chip please

all hynix

 

[xprs]

Yeah you placed incorrect bios on card is why

Pull the card from system and see if you can identify a ram chip located on the card please with a picture, if you can't, you will need to remove the heatsink, use fresh paste on gpu die that is designed for the gpu, and get a picture of a ram chip please

@eidairaman1 Are the photos I posted enough?

 

[VuurVOS]

@eidairaman1 Are the photos I posted enough?

Please try one of these bioses.

ASRock RX 580 VBIOS

8 GB GDDR5, 1370 MHz GPU, 2000 MHz Memory

www.techpowerup.com

AMD RX 580 VBIOS

8 GB GDDR5, 1370 MHz GPU, 2000 MHz Memory

www.techpowerup.com

ASRock RX 580 VBIOS

8 GB GDDR5, 1370 MHz GPU, 2000 MHz Memory

www.techpowerup.com

ASRock RX 580 VBIOS

8 GB GDDR5, 1370 MHz GPU, 2000 MHz Memory

www.techpowerup.com

 

[xprs]

Please try one of these bioses.

ASRock RX 580 VBIOS

8 GB GDDR5, 1370 MHz GPU, 2000 MHz Memory

www.techpowerup.com

AMD RX 580 VBIOS

8 GB GDDR5, 1370 MHz GPU, 2000 MHz Memory

www.techpowerup.com

ASRock RX 580 VBIOS

8 GB GDDR5, 1370 MHz GPU, 2000 MHz Memory

www.techpowerup.com

ASRock RX 580 VBIOS

8 GB GDDR5, 1370 MHz GPU, 2000 MHz Memory

www.techpowerup.com

@VuurVOS @eidairaman1
At first the GPU clock and memory were showing as 0. I updated the drivers and now they are showing

The bus interface sometimes changes to 3.0 and sometimes to 1.1, is that normal?

And my graphics card fan is always spinning, is that normal?

 

[eidairaman1]

@eidairaman1 Are the photos I posted enough?

Yeah they're fine, just busy with work

 

[VuurVOS]

At first the GPU clock and memory were showing as 0. I updated the drivers and now they are showing

Did you flash a different vbios or are you using "unofficially" patched drivers? If you used patched drivers, the problem is still not solved!

The bus interface sometimes changes to 3.0 and sometimes to 1.1, is that normal?

Powersaving. Its normal when enabled. Under 3D load it should stay at 3.0.

And my graphics card fan is always spinning, is that normal?

ASRock doesn't mention something like zero DB cooling when the GPU is below a certain temperature. Its normal.

Loading…

pg.asrock.com

 

[xprs]

Did you flash a different vbios or are you using "unofficially" patched drivers? If you used patched drivers, the problem is still not solved!


Powersaving. Its normal when enabled. Under 3D load it should stay at 3.0.


ASRock doesn't mention something like zero DB cooling when the GPU is below a certain temperature. Its normal.

Loading…

pg.asrock.com

@VuurVOS @eidairaman1

thanks for the information.

I installed the bios with vbflash 2.93 and downloaded the drivers from amd's own website.

but there is a problem, I tried all the bios you sent but The problem continues I can't start it when csm is disabled. the screen does not come

My 6900 xt graphics card starts with csm disabled.

 

[eidairaman1]

Contact asrock on this, they might be able to cook you something

 

[VuurVOS]

but there is a problem, I tried all the bios you sent but The problem continues I can't start it when csm is disabled. the screen does not come

Did you try all graphics card outputs? DP, HDMI etc?

 

[xprs]

Did you try all graphics card outputs? DP, HDMI etc?

@VuurVOS yes ı try but not work.
I sent an e-mail to asrock company and I am waiting for a response for the original bios.