I want to find the BIOS for chip 215-0876406

[alfonso772]

The chip number on the video card is 215-0876406
The memory is Samsung 031 K4G80325FC-HC25

VRAM memory is not marked as it is not compatible with the bios that is installed
And it marks that it is an AMD Radeon rx 590 gme

 

[VuurVOS]

The chip number on the video card is 215-0876406
The memory is Samsung 031 K4G80325FC-HC25

VRAM memory is not marked as it is not compatible with the bios that is installed
And it marks that it is an AMD Radeon rx 590 gme

215-0876406 = Polaris with 2048SP enabled. (RX470/RX570/RX580 2048SP)
RX 590 GME has 2308SP enabled.

Can you make a picture of the whole PCB? The picture of the cooler doesnt tell us much.

This bios might work for you:

AMD RX 580 VBIOS

8 GB GDDR5, 1284 MHz GPU, 1750 MHz Memory

www.techpowerup.com

 

[alfonso772]

I have the P/N mismatch error,
I think I need the P/N to match
I have the 113-XXX-XXX

 

[alfonso772]

215-0876406 = Polaris with 2048SP enabled. (RX470/RX570/RX580 2048SP)
RX 590 GME has 2308SP enabled.

Can you make a picture of the whole PCB? The picture of the cooler doesnt tell us much.

This bios might work for you:

AMD RX 580 VBIOS

8 GB GDDR5, 1284 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Yes, here's a picture of the PCB

 

[VuurVOS]

I have the P/N mismatch error,
I think I need the P/N to match
I have the 113-XXX-XXX

You need to use AMDVBFlash 2.93 with the correct parameters. See instructions below.

For RX 500 Series (Polaris) and Older:

Get amdvbflash 2.93

https://www.techpowerup.com/download/ati-atiflash/

Then look for Version 4.68, underneath 4.68 you will see a link to show older version, click that and you should see version 2.93

Follow these steps carefully:

1. Open your "C:" drive in Windows, create a new folder, call it atiflash.

2. Extract the contents of atiflash_293.zip to the "C:\atiflash" folder

3. Find the bios file you downloaded and rename the bios file to 5 digits with .rom on end Example RX 580, change file to rx580.rom (r****.rom)

4. Move r****.rom to the "C:\atiflash" folder

5. Open the start menu, type cmd, when cmd.exe appears right click it and hit "Run as administrator"

6. At the command prompt type in cd\ and press enter until only C:\> is on the screen.

7. Type in cd/atiflash and press enter, you should see C:\atiflash>

8. Type in amdvbflash.exe -i to identify the gpu you want to flash with a 0, 1, or 2)

9. At the C:\atiflash> prompt type in
amdvbflash.exe -unlockrom 0
(there is a space between the e and -unlockrom and 0)(0 is the number zero)
press enter and you will be prompted that the "ROM Unlocked" (or 1, 2)

10. At the C:\atiflash> prompt type in
amdvbflash.exe -f -p 0 r****.rom
(there is a space between the .exe and -f, and a space between -f and -p and 0).
(Or 1, 2)

Press Enter

Follow directions on screen and if flash is successful exit the command prompt and restart, windows should show up on screen.

 

[alfonso772]

You need to use AMDVBFlash 2.93 with the correct parameters. See instructions below.

Thank you very much in the bios that you sent me I searched for similar bios and one appeared with the same P/N and now the pc already recognizes the graph as I can also play I just need to change to the bios that you told me since that would be the correct one