why i can't have acces to multiplier field?

[SunRise-]

cheers to comunity,
I have an dillema..Why i can't SET Multiplier?The program itself won't let me to check,and i want to set that field to ONLY 20 not 25. Is there any way to have accses tot that field?
I try to use Intel Extreme Tuning utility too and that program won't let me either...
I want to downcloack my processor from 2.6 GHZ stock speed to 2.2 or even 2.0 Ghz because in games demanding like Stalker 2, it goes up to 95 degree and is very dangerous. I want to cool down a bit .I want 85 degree max. on CPU if is possible....
thanks in advance for any advice

 

[unclewebb]

Why i can't SET Multiplier?

Your CPU is using Speed Shift Technology (SST) so Set Multiplier is no longer used. Adjust Speed Shift Max in the TPL window instead of Set Multiplier.

If you have an overheating problem then you need to fix that. Time to repaste with Honeywell PTM 7950.

95C is not dangerous. It is a normal operating temperature for an Intel CPU.

 

[SunRise-]

i set to 20.By default it was 45.I check temp in Stalker 2 now .maybe drop under 90 degree now
thanks so much

p.s
thanks again.if i set to 2000mhz,the fps drop to 45 but the temp is resonable to 74 degree,if i set to stock speed 2600 mhz the fps is near 60 but the temp is going to over 90 degree...,and if not use throttle stop program ,the temp si going to over 95 degree sometime is reach 96 and MSi Afterburner warning me the limit temp is exceed....

 

[unclewebb]

Post a picture of the FIVR window. Most people use ThrottleStop to lower the CPU voltage. This is the best way to lower heat. There is no loss in performance when you undervolt.

 

[SunRise-]

Post a picture of the FIVR window. Most people use ThrottleStop to lower the CPU voltage. This is the best way to lower heat. There is no loss in performance when you undervolt.

what can i do here?i really don t know

 

[unclewebb]

i really don t know

Did you try searching Google for 9750H ThrottleStop settings?

Try setting the core and the cache to a negative offset of -100 mV.

The main problem is terrible cooling. Have you ever blown out the dust or changed the thermal paste? Now would be a good time.