• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

help me find the right bios for my his RX580 Iceq2 X 8Gb

froman14

New Member
Joined
Feb 14, 2025
Messages
9 (0.06/day)
I bought a video card with my own hands. It seems like it's working fine, but I like what's behind the bios right now. in the first position is the BIOS from the xfx card. (photo of gpu-z). here, the frequency is slightly overclocked by 1386/2000, and Samsung memory. The second one has a BIOS from Sapphire(1200/2250, Hynix). I installed the standard bios 1366/2000, memory Hynix. but with this bios, I see artifacts when booting and sometimes the system freezes. with the xfx bios, I can play and everything seems to be fine. Can we just leave it as it is. the second problem is that I can not pass the osst test, I suspect that there is not enough power supply. I'm using a Xeon e3-1270v3 processor, but I don't see any problems in games (xfx bios+undervolt). What solutions do I have?
 

Attachments

  • IronHrt_20250222_095122_lmc_8.4.jpg
    IronHrt_20250222_095122_lmc_8.4.jpg
    9.3 MB · Views: 61
  • IronHrt_20250221_080051_lmc_8.4.jpg
    IronHrt_20250221_080051_lmc_8.4.jpg
    9.9 MB · Views: 48
  • Screenshot_20250221-204316_Kufar.png
    Screenshot_20250221-204316_Kufar.png
    1.9 MB · Views: 55
  • IronHrt_20250221_080211_lmc_8.4.jpg
    IronHrt_20250221_080211_lmc_8.4.jpg
    8.8 MB · Views: 53
  • IronHrt_20250221_165239_lmc_8.4.jpg
    IronHrt_20250221_165239_lmc_8.4.jpg
    8.7 MB · Views: 54
Last edited:
Quiet Bios:
Performance Bios:
 
Please remove cooler and make a clear picture of the PCB. Also make a picture of one of the memory chips since one GPU-Z screenshot tells Hynix and the other tells Samsung.
 
Please remove cooler and make a clear picture of the PCB. Also make a picture of one of the memory chips since one GPU-Z screenshot tells Hynix and the other tells Samsung.
Okay, I'll come home tomorrow and send it, thanks for responding.
 
Please remove cooler and make a clear picture of the PCB. Also make a picture of one of the memory chips since one GPU-Z screenshot tells Hynix and the other tells Samsung.
here is a photo of the board, Hynix memory chips
 

Attachments

  • IMG_20250224_134404.jpg
    IMG_20250224_134404.jpg
    883 KB · Views: 35
  • IMG_20250224_135309_031.jpg
    IMG_20250224_135309_031.jpg
    209.8 KB · Views: 36
Which bios did give you artifacts? The bioses shared by Caring1 should be the correct one.
 
Какие биографии дали вам артефакты? Биозы, разделяемые Caring1, должны быть правильными.
with them, I get artifacts at boot, before the system boots.
 
with them, I get artifacts at boot, before the system boots.
If it is only the splash screen (motherboard boot logo) I wouldn't worry.
 
Если бы это был только экран всплеска (логотип загрузки материнской платы) я бы не беспокоился.
okay, I'll test the standard bios, the system crashed on it a couple of times, but I'm not sure if it was the graphics card for sure.
 
I think the card is faulty since bioses are valid for your card.
Did you replace the thermal pads and repaste the card?
 
Я думаю, что карта неисправна, так как биосы действительны для вашей карты.
Вы заменили термальные прокладки и перепечатали карту?
now I was playing with my native BIOS in the evening (which you recommended to me), except for artifacts, there were no problems when loading. Yes, I changed the thermal pads and thermal paste.
 
Bad ram or ram controller, time to upgrade to a RX 6600/XT, 6700/XT...
 
Back
Top