- Joined
- Sep 23, 2023
- Messages
- 667 (1.26/day)
I made a post about this before asking about the issue and now after looking at the pins, it seem s ANTEC installed the wrong 4 pin on the cpu 4+4. 4 are ok, and 4 arent. I had a burnt/melted pin, but on the correct side of the 4pin
ANTEC VP600P. old psu. still can do its job in an FX 8320 pc. I got a 2x molex to 8 pin. cut the wires on psu and the adapter and soldered it in staggered. so heat shrink dont all sit together at the same spot. tested with multimeter. 11.97v on all. grounds also tested when inverted shows ok.
you may say well maybe its pcie. it isnt. there another 8 wires coming out that have two 2+6 connectors that say pcie on them. all the others are 24/sata/molex
this cpu 4+4 doesnt say cpu on it
the top is the adapter I soldered in. the bottom what the psu had
ANTEC VP600P. old psu. still can do its job in an FX 8320 pc. I got a 2x molex to 8 pin. cut the wires on psu and the adapter and soldered it in staggered. so heat shrink dont all sit together at the same spot. tested with multimeter. 11.97v on all. grounds also tested when inverted shows ok.
you may say well maybe its pcie. it isnt. there another 8 wires coming out that have two 2+6 connectors that say pcie on them. all the others are 24/sata/molex
this cpu 4+4 doesnt say cpu on it
the top is the adapter I soldered in. the bottom what the psu had