Cant read/flash bios of Asus RX 6700 TUF with amdvbflash

[Mech0z]

I am trying to fix my GPU which have stability problems (Showing artifacts) at low voltage, but I cant change or update the bios, I keep getting errors and GPUZ
If I read the bios using techpowerup GPUZ I get this bios https://www.techpowerup.com/vgabios/258315/258315 but I presume I should expect https://www.techpowerup.com/vgabios/231517/asus-rx6700xt-11264-210122

Does that mean my card have been flashed manually before (I bought it used)?

amdvbflash errros after running AMDVBFlashDriverInstaller with install:

http://imgur.com/r9FxrgM

GPU-Z

http://imgur.com/dztdLD6

 

[Caring1]

Why are you trying to flash the GPU, both the linked Vbios's are the same, flashing will not make a difference.

 

[eidairaman1]

Return the card for money back

 

[Mech0z]

Why are you trying to flash the GPU, both the linked Vbios's are the same, flashing will not make a difference.

I have artifacts when my computer idles/simple games, but nothing when I play AAA games, so I want to raise the minimum vcore, so I would like to modify the bios, I tried using MorePowerTool to apply it, but could not get that to work either

Return the card for money back

The problem only started recently, if I could I would have.

 

[eidairaman1]

I have artifacts when my computer idles/simple games, but nothing when I play AAA games, so I want to raise the minimum vcore, so I would like to modify the bios, I tried using MorePowerTool to apply it, but could not get that to work either



The problem only started recently, if I could I would have.

Replace thermalpads and paste then.

You haven't flashed your card yet correct?

 

[Mech0z]

Replace thermalpads and paste then.

You haven't flashed your card yet correct?

Already tried repasting, didn't change the thermal pads though! But I cant see how bad thermal pads would make this error though, why does it work when the card is hard pressed and warm, but not when cold, I would expect it to be opposite to be the case then :/

 

[eidairaman1]

Already tried repasting, didn't change the thermal pads though! But I cant see how bad thermal pads would make this error though, why does it work when the card is hard pressed and warm, but not when cold, I would expect it to be opposite to be the case then :/

Find a pcb repair station like northridgefix then

 

[Mech0z]

Find a pcb repair station like northridgefix then

Not worth it, here in Denmark such service would probably cost 600kr/hour (80-100$)

So I am only looking for stuff to try myself