SPDTool: Read, Edit and Flash your Memory's SPD

Ketxxx · Jul 12, 2008

imperialreign said:
I tried submitting a couple of SPD dumps from a couple of el-cheapo low-end PNY Optima sticks and it pops up with this when I hit 'submit'

not sure if that's an error or not . . .

anyhow, if you didn't get those SPDs, I've got the dumps saved if you'd like to add them to the database, just let me know.

Dumps wernt submitted sucessfully. By the looks of all that HTML garble its a 404 error, so either the server was down at that time, or somebody messed up their HTML code somewhere.

vrdublu · Jul 13, 2008

Does anyone know where I can get a speed dump of Mushkin XP2-6400 DDR2-800 2GB (2x1024MB)CAS4-4-3-10 (996523). If anyone has these and wouldn't mind uploading it, I would greatly appreciate it. :toast:

Dr. Spankenstein · Jul 13, 2008

I'll give it a shot, don't know if it will work on an X38 board though.

At the latest, maybe Tuesday. I might have to plug by Bad Axe back in to upload.

Ketxxx · Jul 13, 2008

Does that kit have black heatspreaders?

Dr. Spankenstein · Jul 13, 2008

Yep. Them's the ones!

Ketxxx · Jul 13, 2008

SPDtool will work on a X38 board, as far as I know ICH9R is supported, ICH10R is not. (which means I'm screwed for editing speed dumps atm.... don't all look at me like scared ferrets thinking I'm going to make spdtool support ICH10R. W1z can do that

) Also, speed tables and timings would need to be adjusted, but using a spd dump from a 2GB kit of XP8000 should also work.

Dr. Spankenstein · Jul 13, 2008

Good to know! Thanks.

vrdublu, be looking for it sooner than later!

p_o_s_pc · Jul 13, 2008

Dippyskoodlez said:
Whoa.. wait.. I didn't realize this can edit SPD.

YEAH!!!!!!

You rock.

You need a cookie. Someone get this man a cookie!!!!!

here w1zzard is your cookie. sorry i took a bite its good

janjansen · Jul 14, 2008

I am getting the following error when I start SPDtool, even when I run the program as administrator:

‘No memory modules found. Incompatible SMbus driver?’

Think SPDtool is showing the correct error, it’s the Nvidia 780a chipset which is new on the market and had already my share of errors when installing Vista.

I urgently need to get SPDtool working, can't get 1066mhz without errors.
Has an new spd, has to flash it according to OCZ to solve my problems.

Any one solutions?

Ketxxx · Jul 14, 2008

What OCZ memory do you have? and SPDtool does not work on a P45 board atm.

Dr. Spankenstein · Jul 14, 2008

Well, I attempted to upload my info and got the same error as imperialreign.

I give.

Anyway, I determined I have the 996523 part.
Sorry...

janjansen · Jul 14, 2008

Ketxxx said:
What OCZ memory do you have? and SPDtool does not work on a P45 board atm.

OCZ2N1066SR1G 2 x 2G

vrdublu · Jul 15, 2008

Dr. Spankenstein said:
Well, I attempted to upload my info and got the same error as imperialreign.

I give.

Anyway, I determined I have the 996523 part.
Sorry...

Would you be able to email it to me? vrdublu@gmail.com :toast:

Ketxxx · Jul 15, 2008

janjansen said:
OCZ2N1066SR1G 2 x 2G

I have that exact same memory kit and its being pissy on my P5Q Pro, mind uploading the new spd data you have for them?

janjansen · Jul 15, 2008

Ketxxx said:
I have that exact same memory kit and its being pissy on my P5Q Pro, mind uploading the new spd data you have for them?

See http://www.ocztechnologyforum.com/forum/showthread.php?t=37753
(post 2 is for 1GB)

But............................. ITS FOR THE PHENOM!!

Can advise you to contact, like I did, Eric Ryder OCZ forum support manager and tell him of your problem and he WILL advise you.

Dr. Spankenstein · Jul 16, 2008

vrdublu said:
Would you be able to email it to me? vrdublu@gmail.com

Done.

Here is the screen I promised.

Frick & Frack! TPU upload isn't working right for me...

Ketxxx · Jul 16, 2008

janjansen said:
See http://www.ocztechnologyforum.com/forum/showthread.php?t=37753
(post 2 is for 1GB)

But............................. ITS FOR THE PHENOM!!

Can advise you to contact, like I did, Eric Ryder OCZ forum support manager and tell him of your problem and he WILL advise you.

Alright I'll keep that in mind. Fired the Crosshair up today and made some heavy changes to the spd data of these OCZ modules, hopefully the changes I made will make em work right.. but we'll see.

janjansen · Jul 16, 2008

Ketxxx said:
Alright I'll keep that in mind. Fired the Crosshair up today and made some heavy changes to the spd data of these OCZ modules, hopefully the changes I made will make em work right.. but we'll see.

Had my share of troubles with the Crosshair II Formula, was pestering Asus for 2 months and they released bios 0803; the release note state 'Enhanced compatibility with certain memory modules.'
With the bios 0803 my system is steady with 800mhz but I only could reach 1066mhz by changing the spd according to OCZ's posting.

System has been tested for several hours and was steady, even Prime95 had no errors!

Has cost me 2 months!

Ketxxx · Jul 16, 2008

I don't have the Crosshair 2, I got the original Crosshair. At this rate I'm thinking I should of stuck with my instincts and stayed away from OCZ like the plauge. Nothing but bad experiences with em. I'll be getting some Geil Black Dragon in the post tomorrow, There shouldnt be any issues with them, especially as I injected the Maximum 2 Formula memory table into my P5Q Pro BIOS. The M2F supports a crapload of Geil modules.

thebeephaha · Jul 16, 2008

vrdublu said:
Does anyone know where I can get a speed dump of Mushkin XP2-6400 DDR2-800 2GB (2x1024MB)CAS4-4-3-10 (996523). If anyone has these and wouldn't mind uploading it, I would greatly appreciate it.

I think I posted this earlier, do a search.

activated1 · Jul 26, 2008

Will there be support for Intel P45 chipset?

Ketxxx · Jul 26, 2008

Most likely w1z will do it when hes back, beyond that, your guess is as good as ours.

Jip · Sep 4, 2008

no news for the p45 ??

jindra · Sep 9, 2008

So this program is probably the only thing that saved me from buying incompatible memory with my laptop with a bios that does not downclock overspec dimms.

It it however telling me each time i'm writing that I have an INVALID CHECKSUM. How would I fix this problem and would this be the reason I am not getting dual channel mode out of the 2x ddr2 667 sodimms?

Edit
Ok nm I found the fix checksum, but i'm still getting only single channel mode on rs400 chipset, which should support dual channel.

iimdick2 · Sep 12, 2008

sorry for asking but can i know if its overclock the graphic card or gpu and how

System Name	Ravens Talon
Processor	AMD R7 3700X @ 4.4GHz 1.3v
Motherboard	MSI X570 Tomahawk
Cooling	Modded 240mm Coolermaster Liquidmaster
Memory	2x16GB Klevv BoltX 3600MHz & custom timings
Video Card(s)	Powercolor 6800XT Red Devil
Storage	250GB Asgard SSD, 1TB Integral SSD, 2TB Seagate Barracuda
Display(s)	27" BenQ Mobiuz
Case	NZXT Phantom 530
Audio Device(s)	Asus Xonar DX 7.1 PCI-E
Power Supply	1000w Supernova
Software	Windows 10 x64
Benchmark Scores	Fast. I don't need epeen.

Processor	i7 3930K @ 4.2Ghz 1.26V :)
Motherboard	Asus Sabertooth X79
Cooling	WC Galore
Memory	16Gb Kingston 2133
Video Card(s)	Dual GTX 580 SLI Watercooled
Storage	OCZ Vertex 3 SSD/Raid 0 + 2x WD Black 640/Raid 0
Display(s)	Asus 27" @ 1920 x 1080
Case	Corsair 800D
Audio Device(s)	On Board High Def. Sennheiser PC360
Power Supply	Seasonic 850W
Software	W7 Ultimate 64 Bit

Processor	Intel C2D E8500 @ 4.25GHz (1.36V)
Motherboard	Gigabyte GA-X38-DQ6
Cooling	(Temporary) Tuniq Tower 120
Memory	2GB Transcend aXeram 1200+
Video Card(s)	HIS HD3870 CF Volt modded
Storage	3 Seagate 320Gb Barracuda in an Intel Matrix Raid array
Display(s)	Sony GDM-FW900 24" Widescreen CRT (a.k.a "The Shiznotch")
Case	Ultra Aluminus Full Tower
Audio Device(s)	onboard Intel HD audio
Power Supply	PC Power & Cooling Silencer 750
Software	XP MCE + Vista (HP) dual-boot

System Name	Ravens Talon
Processor	AMD R7 3700X @ 4.4GHz 1.3v
Motherboard	MSI X570 Tomahawk
Cooling	Modded 240mm Coolermaster Liquidmaster
Memory	2x16GB Klevv BoltX 3600MHz & custom timings
Video Card(s)	Powercolor 6800XT Red Devil
Storage	250GB Asgard SSD, 1TB Integral SSD, 2TB Seagate Barracuda
Display(s)	27" BenQ Mobiuz
Case	NZXT Phantom 530
Audio Device(s)	Asus Xonar DX 7.1 PCI-E
Power Supply	1000w Supernova
Software	Windows 10 x64
Benchmark Scores	Fast. I don't need epeen.

Processor	Intel C2D E8500 @ 4.25GHz (1.36V)
Motherboard	Gigabyte GA-X38-DQ6
Cooling	(Temporary) Tuniq Tower 120
Memory	2GB Transcend aXeram 1200+
Video Card(s)	HIS HD3870 CF Volt modded
Storage	3 Seagate 320Gb Barracuda in an Intel Matrix Raid array
Display(s)	Sony GDM-FW900 24" Widescreen CRT (a.k.a "The Shiznotch")
Case	Ultra Aluminus Full Tower
Audio Device(s)	onboard Intel HD audio
Power Supply	PC Power & Cooling Silencer 750
Software	XP MCE + Vista (HP) dual-boot

System Name	el'lappy\|Cruncher \| Cruncher 2
Processor	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling	dual 80mm cooling fan \| WC'ing ) \|cheapo
Memory	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card(s)	onboard \| 60 1GB(hd7770 ) \|8800GTS
Storage	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Display(s)	17in \| 42" 1080P HD 3D TV
Case	lappy case \| CM HAF XB \|none yet
Audio Device(s)	onboard \| onboard \| onboard
Power Supply	Dell brick w/ acer end end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software	Windows 7 Ult. 64bit---->------->

System Name	0BL1V10N
Processor	Intel Core i7 11700K @ 5.1GHz all-core turbo
Motherboard	ASRock Z590 Taichi
Cooling	Cooler Master MasterLiquid 360 (with stock CM fans), 12x Pccooler Moonlight Series ARGB 120mm fans
Memory	(4x16GB) 64GB Mushkin Redline Lumina 3600MHz 16-19-19-39 XMP
Video Card(s)	MSI RTX 4090 SUPRIM LIQUID 24G (not using stock fans) (+150MHz core, +1000MHz memory)
Storage	Western Digital Black SN850X 2TB Gen4 NVMe
Display(s)	1x Alienware AW3821DW (3840x1600@144Hz), 2x Dell SE2717H (1080p@75Hz)
Case	Phanteks Enthoo 719 Anthracite Grey
Audio Device(s)	Schiit Modius + Drop THX AAA 789 + Custom Planar Magnetic Headphones
Power Supply	Thermaltake Toughpower GF3 1200W (12VHPWR)
Mouse	Logitech G502 X Plus
Keyboard	Too many custom mechanical builds to list...
Software	Windows 10 Pro 22H2

System Name	Core2
Processor	Intel C2D E5200 @ 3.8Ghz
Motherboard	ASUS P5K
Cooling	Thermalright Ultra 120A
Memory	4x 1Gb Kingston KHX8500
Video Card(s)	XFX 9600GSO
Storage	WD 3200KS &WD 3200AAJS
Display(s)	acer x223w
Case	Antec P182
Audio Device(s)	Realtek HD
Power Supply	Thermaltake Toughpower 700W Modular

System Name	PC
Processor	E8500
Motherboard	MSI P35 Platinum \| Foxconn Mars P35
Cooling	Noctua NH C12P
Memory	2Go CellShock PC6400 Micron
Video Card(s)	GTS² \| 3850 \| 4850
Storage	Seagate 7200.11 500Go 32Mo
Display(s)	Samsung 226BW
Case	XClio A380
Power Supply	Corsair HX520w

SPDTool: Read, Edit and Flash your Memory's SPD

Heedless Psychic

New Member

Heedless Psychic

Heedless Psychic

F@H&WCG addict

New Member

Heedless Psychic

New Member

New Member

Heedless Psychic

New Member

Heedless Psychic

New Member

Heedless Psychic

New Member

Heedless Psychic

New Member

New Member

New Member