GTX 260/280 Unofficial TPU! Thread

Tatty_Two · Sep 29, 2008

dadi_oh said:
From what I have seen even the plain jane 260 cards will overclock past the OC versions of the cards. However, as is always the case YMMV. I think Tatty's Gainward card is a vanilla version and he has some of the highest clocks around.

My XFX XXX version was factory clocked at 640/1363/2304 (core/shader/mem) vs stock 576/1242/2000 but I still managed to get the clocks up to 756/1512/2500 stable.

From what I can see the ASUS TOP card is at 650 core and 2300 on memory. I am almost positive you will hit at least those numbers with a vanilla card. IMHO of course.

Am going to try a 2006 deathrun tonight to see what she can really do, then the cards for sale if anyones interested! :rolleyes:

dooyou · Sep 29, 2008

dadi_oh said:
And "Ein Prosit" to you too

My card is set to 1.03V in 2D (see attachment) but I never really paid attention to the temps in 2D since my card is pretty much folding all the time when it isn't gaming.

Interesting that Leadtek set yours to 1.11V for 2D though

You can always flash it to 1.03V if it is worrying you.

You probably will want to set your fan up to 60-80% if you plan on doing any overclocking. That can be set in the BIOS too.

O zapf't is

Yes it's worrying me. But I don't know why Leadtek has set my Card to 1.11V in 2d, there are a few cards from Leadtek in the market with 1.11V.

Its bothers me because I'm working most of the time in 2d. Do you think after a flash the card will work with 1,03V?

dadi_oh · Sep 29, 2008

dooyou said:
O zapf't is

Yes it's worrying me. But I don't know why Leadtek has set my Card to 1.11V in 2d, there are a few cards from Leadtek in the market with 1.11V.

Its bothers me because I'm working most of the time in 2d. Do you think after a flash the card will work with 1,03V?

I don't see why not. In 2D mode they scale the clocks waaaay back on the core and memory so I expect it doesn't require much voltage to run. And if Leadtek is just using the NVidia reference design then lot's of other manufacturers are using 1.03V.

If you do decide to flash make sure you backup your original BIOS in case you need to set it back.

Tatty_Two · Sep 29, 2008

A small improvement, upto 21,565 now, funny thing is, I still think there is more to come from this GPU, at 1590 shaders I might just be able to get near to 790mhz on the core :eek:

dadi_oh · Sep 29, 2008

Tatty_One said:
A small improvement, upto 21,565 now, funny thing is, I still think there is more to come from this GPU, at 1590 shaders I might just be able to get near to 790mhz on the core

Congrats

So do you think you can get any more out of your memory? Mine is stable at 1250 (2500) and I have not yet found the top end. Not sure how much difference it makes in the benches however.

Tatty_Two · Sep 29, 2008

dadi_oh said:
Congrats

So do you think you can get any more out of your memory? Mine is stable at 1250 (2500) and I have not yet found the top end. Not sure how much difference it makes in the benches however.

I have never actually tried to go above 1200, the memory speed makes very little difference but next time I try a run I will raise it a bit to see what she can do.

Tatty_Two · Sep 29, 2008

Broke the 22,000 barrier with my little 260, this was a deathrun I dont think that there is anymore to give on this GPU, certainly not on air!

TonyStark · Sep 29, 2008

That things a beast! The Quad @ 4.4GHz doesn't hurt either.

Cold Storm · Sep 29, 2008

Tatty...

that's a sweet "06" run!
:toast:

I wish I could have a taste of your stuff!

TonyStark · Sep 29, 2008

Cold Storm said:
I wish I could have a taste of your stuff!

In before the edit.

Tatty_Two · Sep 30, 2008

TonyStark said:
That things a beast! The Quad @ 4.4GHz doesn't hurt either.

Thanks, the quad will actually do more, have not tried a 4.5gig run but she seems fine at that speed, just very wary of putting too many volts through these 45nm chips, I kinda like this one so I wanna keep it!

SplitBURST · Sep 30, 2008

Goddamn!!!

Just got my ASUS ENGTX260/HTDP 896MB and it's a GODDAMN good card.

But, some overclocking is needed if u want Crysis to run smood on High @ 1680*1050

here are my results...

GPU Core Clock: 730 | Shader Clock: 1480 | Memory Clock: 1200 | Temp ~64c | Fan speed: ~2310RPM | Artifacts scan for ~10min (Success)

I also wounder when pushing these cards to the limit with these instantly high clock speed how does it affect the lifespan of the graphic card, is heat the only thing one should be concerned about?

Other info, voltages
Extra: 1,06
3D: 1,06
Thrtl: 1,06
2D: 1,03

waxking1 · Oct 1, 2008

Just installed my 260-216. Seems to be pretty decent. I hope after it burns in for a while that I can go to the 1566 mark on the shaders but I'm not counting on it. For most of these cards 1512 is still the limit. This card runs very cool. During 3dm06 it only got to 53 degrees. I never got my other 260 or 280 to run that cool even after taking them apart and applying AS5 and MX2. I don't think I'm going to take this one apart.

http://www.techpowerup.org/uploaded.php?file=080930/260-216 3dm06 ATI.jpg

Kursah · Oct 1, 2008

Nice results man...I acutally just got home with mine lol...haven't taken it out of the box yet tho. More to come!

Thanks for the results folks! Keep em' comin! :toast:

Kursah · Oct 1, 2008

Just a quick post...I just happened to notice that my EVGA GTX260 Core216 runs at 1.06v for 3D and Extra modes. So far the card is very stable at stock clocks, and I have yet to OC, just turned fan up to 80%.

It's not kicking down to 3D or 2D/Idle mode for some reason...prolly a driver glitch, I decided to stick with 177.83's for now.

More to come tomorrow after work when I get some time to investiage tho...but here's the layout:
Extra: 1.06v
3d: 1.06v
Thrtl: Blank
2D: 1.05v

I also noticed in the drop-down menu that the voltage options are different:
1.05v, 1.06v, 1.12v, and finally 1.15v...no more 1.18v??? WTF is up? WTH is going on? Time to investigate folks! Anyone with 260/216's please post up!

More to come...

SplitBURST · Oct 1, 2008

waxking1 said:
Just installed my 260-216. Seems to be pretty decent. I hope after it burns in for a while that I can go to the 1566 mark on the shaders but I'm not counting on it. For most of these cards 1512 is still the limit. This card runs very cool. During 3dm06 it only got to 53 degrees. I never got my other 260 or 280 to run that cool even after taking them apart and applying AS5 and MX2. I don't think I'm going to take this one apart.

http://www.techpowerup.org/uploaded.php?file=080930/260-216 3dm06 ATI.jpg

Do you really gain much by unlinking gpu clock and shader clock?

Cold Storm · Oct 1, 2008

You can get a higher GPU clock with these cards if you unlink them.

SplitBURST · Oct 1, 2008

Overclocking not working anymore!!!???

WTF happend, after installing NVIDIA System Tools with ESA Support i cant overclock anymore not at all... i removed this crap and did a system restore but still i cant overclock at all what have happend??????

Puuuuuh... all i had todo was to start some 3D app so that it automatically changed from low 2D clocks to Extra (3D Clocks) after that overclocking was possible again

waxking1 · Oct 1, 2008

Kursah said:
Just a quick post...I just happened to notice that my EVGA GTX260 Core216 runs at 1.06v for 3D and Extra modes. So far the card is very stable at stock clocks, and I have yet to OC, just turned fan up to 80%.

It's not kicking down to 3D or 2D/Idle mode for some reason...prolly a driver glitch, I decided to stick with 177.83's for now.

More to come tomorrow after work when I get some time to investiage tho...but here's the layout:
Extra: 1.06v
3d: 1.06v
Thrtl: Blank
2D: 1.05v

I also noticed in the drop-down menu that the voltage options are different:
1.05v, 1.06v, 1.12v, and finally 1.15v...no more 1.18v??? WTF is up? WTH is going on? Time to investigate folks! Anyone with 260/216's please post up!

More to come...

You are seeing something different than I am.

http://www.techpowerup.org/uploaded.php?file=081001/260-216 voltage.jpg

Tatty_Two · Oct 1, 2008

waxking1 said:
Just installed my 260-216. Seems to be pretty decent. I hope after it burns in for a while that I can go to the 1566 mark on the shaders but I'm not counting on it. For most of these cards 1512 is still the limit. This card runs very cool. During 3dm06 it only got to 53 degrees. I never got my other 260 or 280 to run that cool even after taking them apart and applying AS5 and MX2. I don't think I'm going to take this one apart.

http://www.techpowerup.org/uploaded.php?file=080930/260-216 3dm06 ATI.jpg

Very nice indeed! How does it compare in 2006 at the same clock speeds as the origional standard 260....are you able to make a performance comparison yet?

Tatty_Two · Oct 1, 2008

Kursah said:
Just a quick post...I just happened to notice that my EVGA GTX260 Core216 runs at 1.06v for 3D and Extra modes. So far the card is very stable at stock clocks, and I have yet to OC, just turned fan up to 80%.

It's not kicking down to 3D or 2D/Idle mode for some reason...prolly a driver glitch, I decided to stick with 177.83's for now.

More to come tomorrow after work when I get some time to investiage tho...but here's the layout:
Extra: 1.06v
3d: 1.06v
Thrtl: Blank
2D: 1.05v

I also noticed in the drop-down menu that the voltage options are different:
1.05v, 1.06v, 1.12v, and finally 1.15v...no more 1.18v??? WTF is up? WTH is going on? Time to investigate folks! Anyone with 260/216's please post up!

More to come...

It does not have to say 1.18 though for you to input it of course, if the voltage set remains the same as the old card and it's not now hardware limited to 1.15v then it will still work, my old 8800GT did not have the 1.1v option, it just sat at 1.05v but as I knew the limiter on the board was to 1.1V I just put it in as "extra".

Tatty_Two · Oct 1, 2008

SplitBURST said:
WTF happend, after installing NVIDIA System Tools with ESA Support i cant overclock anymore not at all... i removed this crap and did a system restore but still i cant overclock at all what have happend??????

Puuuuuh... all i had todo was to start some 3D app so that it automatically changed from low 2D clocks to Extra (3D Clocks) after that overclocking was possible again

Dodgy stuff that NTune, un-install your forceware drivers and re-install them, NTune plays with driver instruction sets!

Kursah · Oct 1, 2008

waxking1 said:
You are seeing something different than I am.

http://www.techpowerup.org/uploaded.php?file=081001/260-216 voltage.jpg

Wow, all of your voltages are higher...this is interesting to say the least. I've still got about 4-5 hours of work left before I can dig into this deal.

Whether or not it's dependant on cards, mfg's, maybe "cherry" picked or not, who really knows. I'm curious at the OC-ability of my new card with extra shaders at 1.06v compared to my old card with fewer shaders at 1.12v for sure. We'll find out soon enough!

:toast:

waxking1 · Oct 1, 2008

Tatty_One said:
Very nice indeed! How does it compare in 2006 at the same clock speeds as the origional standard 260....are you able to make a performance comparison yet?

The new card tests a little faster than my old one but not really much. I think its going to get faster as it wears in or I decide to do some mods. I really like the 260s. I got this card to play with until the new 280s come out. I almost bought a 280 FTW a couple of weeks ago but then all the talk started about the new ones.

I thought I did 17600 in 3dmark06 with the old card but couldn't find it. This is close and a good comparison except the shaders a a notch higher.

http://www.techpowerup.org/uploaded.php?file=081001/1566.jpg

Tatty_Two · Oct 1, 2008

waxking1 said:
The new card tests a little faster than my old one but not really much. I think its going to get faster as it wears in or I decide to do some mods. I really like the 260s. I got this card to play with until the new 280s come out. I almost bought a 280 FTW a couple of weeks ago but then all the talk started about the new ones.

I thought I did 17600 in 3dmark06 with the old card but couldn't find it. This is close and a good comparison except the shaders a a notch higher.

http://www.techpowerup.org/uploaded.php?file=081001/1566.jpg

I hear what you are saying about the current 280's, I'm in the mood to get something, just sold my brand new warranty returned 790i ultra so have some cash, just think that I would be dissapointed in the 280 in as much as I am guessing there would actually be little noticeable difference overclocked as they dont seem to clock as well as most of these 260's, now if I could find a 280 that would do at least 770 on the core, then that would be a bit different!

Any idea when these uprated 55nm 280's are speculated at hitting shelves?

Processor	Intel Core i9 11900KF @ -.080mV PL max @220w
Motherboard	MSI MAG Z490 TOMAHAWK
Cooling	DeepCool LS520SE Liquid + 3 Phanteks 140mm case fans
Memory	32GB (4 x 8GB SR) Patriot Viper Steel Bdie @ 3600Mhz CL14 1.45v Gear 1
Video Card(s)	Asus Dual RTX 4070 OC + 8% PL
Storage	WD Blue SN550 1TB M.2 NVME//Crucial MX500 500GB SSD (OS)
Display(s)	AOC Q2781PQ 27 inch Ultra Slim 2560 x 1440 IPS
Case	Phanteks Enthoo Pro M Windowed - Gunmetal
Audio Device(s)	Onboard Realtek ALC1200/SPDIF to Sony AVR @ 5.1
Power Supply	Seasonic CORE GM650w Gold Semi modular
Software	Win 11 Home x64

System Name	Sonny Boy
Processor	i5 11600K 4.9GHz @ 1.35 Vcore
Motherboard	AORUS Z590 Elite AX
Cooling	Deepcool Gammix 240mm AIO
Memory	4 X 8GB Teamgroup DDR4 3200MHz
Video Card(s)	ASUS RTX 3060 Ti GDDR6X
Storage	Adata Legend 1TB
Display(s)	Philips 27" 4K
Power Supply	Corsair 750W
Mouse	Razer Basilisk
Keyboard	Razer Huntsman V2
Software	Windows 11 Pro

Processor	Intel Core i9 11900KF @ -.080mV PL max @220w
Motherboard	MSI MAG Z490 TOMAHAWK
Cooling	DeepCool LS520SE Liquid + 3 Phanteks 140mm case fans
Memory	32GB (4 x 8GB SR) Patriot Viper Steel Bdie @ 3600Mhz CL14 1.45v Gear 1
Video Card(s)	Asus Dual RTX 4070 OC + 8% PL
Storage	WD Blue SN550 1TB M.2 NVME//Crucial MX500 500GB SSD (OS)
Display(s)	AOC Q2781PQ 27 inch Ultra Slim 2560 x 1440 IPS
Case	Phanteks Enthoo Pro M Windowed - Gunmetal
Audio Device(s)	Onboard Realtek ALC1200/SPDIF to Sony AVR @ 5.1
Power Supply	Seasonic CORE GM650w Gold Semi modular
Software	Win 11 Home x64

System Name	Sonny Boy
Processor	i5 11600K 4.9GHz @ 1.35 Vcore
Motherboard	AORUS Z590 Elite AX
Cooling	Deepcool Gammix 240mm AIO
Memory	4 X 8GB Teamgroup DDR4 3200MHz
Video Card(s)	ASUS RTX 3060 Ti GDDR6X
Storage	Adata Legend 1TB
Display(s)	Philips 27" 4K
Power Supply	Corsair 750W
Mouse	Razer Basilisk
Keyboard	Razer Huntsman V2
Software	Windows 11 Pro

Processor	Intel Core i9 11900KF @ -.080mV PL max @220w
Motherboard	MSI MAG Z490 TOMAHAWK
Cooling	DeepCool LS520SE Liquid + 3 Phanteks 140mm case fans
Memory	32GB (4 x 8GB SR) Patriot Viper Steel Bdie @ 3600Mhz CL14 1.45v Gear 1
Video Card(s)	Asus Dual RTX 4070 OC + 8% PL
Storage	WD Blue SN550 1TB M.2 NVME//Crucial MX500 500GB SSD (OS)
Display(s)	AOC Q2781PQ 27 inch Ultra Slim 2560 x 1440 IPS
Case	Phanteks Enthoo Pro M Windowed - Gunmetal
Audio Device(s)	Onboard Realtek ALC1200/SPDIF to Sony AVR @ 5.1
Power Supply	Seasonic CORE GM650w Gold Semi modular
Software	Win 11 Home x64

Processor	Intel Core 2 Duo E8600 @ 4.0GHz
Motherboard	Asus P5Q Pro
Cooling	Zalman CNPS9700LED
Memory	Kingston DDR2 800 @ 4-4-4-12
Video Card(s)	Asus GTX 260
Storage	Seagate 160GB, Seagate 320GB
Display(s)	Samsung 46" LCD (full 1080p)
Case	CoolerMaster Centurion
Audio Device(s)	Onboard
Power Supply	Tagan U22 530W (32 amps on 12V)
Software	Vista ultimate 64 bit
Benchmark Scores	3DMark06 - 17,000

System Name	Haro
Processor	AMD 1700x
Motherboard	AsRork x370 Taichi
Cooling	EK Custom Loop - CPU only
Memory	32gb G-Skill Trident Z
Video Card(s)	EVGA 1080 Superclock 2
Storage	Too Many
Display(s)	Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case	Cooler Master Cosmos II
Power Supply	Cooler Master V1000
Mouse	SteelSeries Rival 500
Software	Win10 Pro
Benchmark Scores	i5 750 4.62ghz pi runs // Evga FTW p55

Processor	Intel Quad Q6600, 3300 MHz (9 x 367)
Motherboard	Gigabyte GA-P35C-DS3R
Cooling	3 chassi, 1 CPU Thermaltake BigTyp 120 VX
Memory	Crucial 4 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-5-5-15 @ 333 MHz)
Video Card(s)	ASUS ENGTX260/HTDP 896 MB
Storage	4-Raid0, Samsung
Display(s)	Samsung SyncMaster 225BW(G)
Audio Device(s)	Realtek ALC885/889A/890 @ Intel 82801IB ICH9 - High Definition Audio Controller
Power Supply	XiON 650Watt
Software	Windows Vista x64
Benchmark Scores	updating...

System Name	Kursah's Gaming Rig 2018 (2022 Upgrade) - Ryzen+ Edition \| Gaming Laptop (Lenovo Legion 5i Pro 2022)
Processor	R7 5800X @ Stock \| i7 12700H @ Stock
Motherboard	Asus ROG Strix X370-F Gaming BIOS 6203\| Legion 5i Pro NM-E231
Cooling	Noctua NH-U14S Push-Pull + NT-H1 \| Stock Cooling
Memory	TEAMGROUP T-Force Vulcan Z 32GB (2x16) DDR4 4000 @ 3600 18-20-20-42 1.35v \| 32GB DDR5 4800 (2x16)
Video Card(s)	Palit GeForce RTX 4070 JetStream 12GB \| CPU-based Intel Iris XE + RTX 3070 8GB 150W
Storage	4TB SP UD90 NVME, 960GB SATA SSD, 2TB HDD \| 1TB Samsung OEM NVME SSD + 4TB Crucial P3 Plus NVME SSD
Display(s)	Acer 28" 4K VG280K x2 \| 16" 2560x1600 built-in
Case	Corsair 600C - Stock Fans on Low \| Stock Metal/Plastic
Audio Device(s)	Aune T1 mk1 > AKG K553 Pro + JVC HA-RX 700 (Equalizer APO + PeaceUI) \| Bluetooth Earbuds (BX29)
Power Supply	EVGA 750G2 Modular + APC Back-UPS Pro 1500 \| 300W OEM (heavy use) or Lenovo Legion C135W GAN (light)
Mouse	Logitech G502 \| Logitech M330
Keyboard	HyperX Alloy Core RGB \| Built in Keyboard (Lenovo laptop KB FTW)
Software	Windows 11 Pro x64 \| Windows 11 Home x64

*GTX 260/280 Unofficial TPU! Thread*

Gone Fishing

New Member

Gone Fishing

Attachments

Gone Fishing

Gone Fishing

Attachments

New Member

Battosai

New Member

Gone Fishing

New Member

New Member

Super Moderator

Super Moderator

New Member

Battosai

New Member

New Member

Gone Fishing

Gone Fishing

Gone Fishing

Super Moderator

New Member

Gone Fishing

GTX 260/280 Unofficial TPU! Thread