- Joined
- Oct 9, 2007
- Messages
- 47,311 (7.52/day)
- Location
- Hyderabad, India
| System Name | RBMK-1000 |
|---|---|
| Processor | AMD Ryzen 7 5700G |
| Motherboard | ASUS ROG Strix B450-E Gaming |
| Cooling | DeepCool Gammax L240 V2 |
| Memory | 2x 8GB G.Skill Sniper X |
| Video Card(s) | Palit GeForce RTX 2080 SUPER GameRock |
| Storage | Western Digital Black NVMe 512GB |
| Display(s) | BenQ 1440p 60 Hz 27-inch |
| Case | Corsair Carbide 100R |
| Audio Device(s) | ASUS SupremeFX S1220A |
| Power Supply | Cooler Master MWE Gold 650W |
| Mouse | ASUS ROG Strix Impact |
| Keyboard | Gamdias Hermes E2 |
| Software | Windows 11 Pro |
Cybenetics certification program's chief engineer, a renowned expert with switching power supplies, and TechPowerUp contributor, Dr Aris Mpitziopoulos, released detailed commentary on the recent statement released by GIGABYTE on the GP-P750/850 GM series PSU design flaw reportage in the press. The earliest of this was broken on TechPowerUp, with our December 2020 review of the GP-P750GM, which led with the headline "With an Explosive Attitude."
Mpitziopoulos dives into the technical details of the design flaw being not just a badly programmed Over-Power Protection (OPP) safety mechanism, but a flawed hardware design overall. Since he reviewed PSUs from this series for TechPowerUp and Hardware Busters, he shares his perspective on how the reviews went, more importantly, the back-and-forth with GIGABYTE when the flaws were discovered.
The following is a statement by Aris Mpitziopoulos:
I didn't want to bother with this matter again initially, but something was troubling me. It can't be right, Gigabyte blaming us reviewers, or users, for abusing its power supplies and not its engineer. So after some thought, I decided to reply to their statement issued on 13th August 2021 about the GP-P750/850 GM PSUs. Below you will find Gigabyte's allegations, as they are written in its statement and my responses.
GIGABYTE: takes reports of this manner extremely seriously and therefore would like to address the reported potential issues as follows…
Aris response: I reported the issues I faced with the GP-P750GM power supply in late October 2020, before I post its review on TechPowerUp and the video review on the Hardware Busters YT channel, and GIGABYTE responded that its engineers tested five units and found no problems. They didn't ask for my bad sample back for failure analysis, which is the typical procedure, and they didn't offer a second sample to continue the review. I have kept all of my correspondence with GIGABYTE's respective team, in case there is any doubt.
GIGABYTE: The OPP safety feature is designed to shut down the unit when the power load exceeds the wattage the unit was designed to operate within. The OPP was set to 120% to 150%, 1020 W~1300 W for GP-P850GM, and 900 W~1125 W for the GP-P750GM.
Aris response: OPP is to protect the PSU from failures. That said, GIGABYTE's engineers should have configured it accordingly. Some platforms with top-notch and tolerant to stress components can have higher OPP settings than other lower-end platforms. It is up to the manufacturer to correctly set OPP to effectively protect the power supply under all conditions and the system that the PSU feeds with power. Lastly, OPP with a 30% range is too high. GIGABYTE should ask for a lower range.
GIGABYTE: We were made aware by third parties of concerns regarding potential issues of the GP-P850GM and GP-P750GM tripping at high wattages when tested via DC Electronic Load equipment for extended lengths of time repeatedly close to the 120% to 150% OPP trigger point. This level of extended testing could severely reduce the lifespan of the product and components of the GP-P850GM and GP-P750GM.
Aris response: First of all, there was no prolonged testing period under overloads since most samples died within a few minutes of testing as Steve (Gamer Nexus) mentions in his video. In my case, the GP-P750 GM sample that I tested shut down during a short period of OPP evaluation and exploded once I tried to start it again to continue testing, with no load on its rails. Even if extended testing at high loads was the case, the engineers should use lower OPP triggering points from the moment they are well aware that the platform can handle higher than normal loads. Finally, reducing the lifespan is an entirely different story from exploding parts, which clearly shows a problem with the OPP setting, which GIGABYTE believes is the culprit.
GIGABYTE: GIGABYTE has made adjustments and lowered the OPP on GP-P850GM and GP-P750GM…. from 120% ~ 150% to 110% ~ 120%
Aris response: GIGABYTE noticed, after our findings, that the platforms cannot withstand a 120%-150% OPP rating and decided to lower it. The problem is that 110%-120% OPP is impossible with analog controllers, which use resistors to adjust OPP. These resistors drift with temperature. In other words, their resistance changes according to the operating conditions, so it is impossible to achieve such a small OPP range under both cold and hot conditions. The only way to achieve a tightly set OPP is through digital circuits, an MCU. Finally, GIGABYTE doesn't mention the operating conditions under which the new OPP settings apply.
GIGABYTE: GIGABYTE would like to stress the potential issues that were reported, only seemed to occur after very long time periods of extreme load testing via DC Electronic load equipment and would not be typical of any real world usage.
Aris response: Gamer Nexus' samples died in a matter of minutes, and my sample died after a short period of OPP evaluation. Moreover, a quick look at the user reports (Newegg, forums, etc.) shows that most of these PSUs died under normal conditions. With so many failures reported on Newegg reviews, it cannot just be a coincidence.
GIGABYTE: GIGABYTE GP-P850GM and GP-P750GM PSU's included industry standard power protection designs OCP, OTP, OVP, OPP, UVP, and SCP.
Safety certification from various countries to ensure safe and stable operation of your system.
Aris response: From the moment these units have a CE certification, I would love to check the corresponding CE reports including protection features evaluation. To the best of my knowledge, no safety certification evaluates the PSU's protection features.
GIGABYTE: Despite the fact that both before & after OPP adjustment versions are reliable for real world usage
Aris response: Many users that bought these products have a different opinion and experience. Also, OPP is not there for us reviewers only, but it should protect the PSU under all conditions. Otherwise, there is no point in having this protection feature when it doesn't save the PSU. And also, who and what defines real-world usage? For me, typical use can be having my PC idle most of the time while other users play games most of the time, stressing the entire system. Other users can run tests with Furmark and Prime95 at the same time. My point is, real-world usage varies from user to user.
GIGABYTE: Serial Number below can apply for Return and Exchange service
Aris response: GIGABYTE had made OPP changes to some production batches but didn't inform the people that bought units with high OPP about this or even give them the chance to replace their units, just to be on the safe side. They applied a silent fix, and this means that they were troubled enough to do it.
Conclusion: This is not just a badly set OPP since many units died under moderate loads and within short periods. I strongly believe that this is just a bad design, the FETs are not driven correctly, and although in quick pre-checks and normal conditions, the PSU can be ok, there are cases (not only under stress) where they fail. The timing of the FETs is not correct, and this is due to a lousy gate driver or a lousy implementation. Of course, I cannot be dead sure without any samples, older and newer generations, in my hands to test and break apart for failure analysis.
This article explains the problem I described above in detail.
View at TechPowerUp Main Site
Mpitziopoulos dives into the technical details of the design flaw being not just a badly programmed Over-Power Protection (OPP) safety mechanism, but a flawed hardware design overall. Since he reviewed PSUs from this series for TechPowerUp and Hardware Busters, he shares his perspective on how the reviews went, more importantly, the back-and-forth with GIGABYTE when the flaws were discovered.
The following is a statement by Aris Mpitziopoulos:
I didn't want to bother with this matter again initially, but something was troubling me. It can't be right, Gigabyte blaming us reviewers, or users, for abusing its power supplies and not its engineer. So after some thought, I decided to reply to their statement issued on 13th August 2021 about the GP-P750/850 GM PSUs. Below you will find Gigabyte's allegations, as they are written in its statement and my responses.
GIGABYTE: takes reports of this manner extremely seriously and therefore would like to address the reported potential issues as follows…
Aris response: I reported the issues I faced with the GP-P750GM power supply in late October 2020, before I post its review on TechPowerUp and the video review on the Hardware Busters YT channel, and GIGABYTE responded that its engineers tested five units and found no problems. They didn't ask for my bad sample back for failure analysis, which is the typical procedure, and they didn't offer a second sample to continue the review. I have kept all of my correspondence with GIGABYTE's respective team, in case there is any doubt.
GIGABYTE: The OPP safety feature is designed to shut down the unit when the power load exceeds the wattage the unit was designed to operate within. The OPP was set to 120% to 150%, 1020 W~1300 W for GP-P850GM, and 900 W~1125 W for the GP-P750GM.
Aris response: OPP is to protect the PSU from failures. That said, GIGABYTE's engineers should have configured it accordingly. Some platforms with top-notch and tolerant to stress components can have higher OPP settings than other lower-end platforms. It is up to the manufacturer to correctly set OPP to effectively protect the power supply under all conditions and the system that the PSU feeds with power. Lastly, OPP with a 30% range is too high. GIGABYTE should ask for a lower range.
GIGABYTE: We were made aware by third parties of concerns regarding potential issues of the GP-P850GM and GP-P750GM tripping at high wattages when tested via DC Electronic Load equipment for extended lengths of time repeatedly close to the 120% to 150% OPP trigger point. This level of extended testing could severely reduce the lifespan of the product and components of the GP-P850GM and GP-P750GM.
Aris response: First of all, there was no prolonged testing period under overloads since most samples died within a few minutes of testing as Steve (Gamer Nexus) mentions in his video. In my case, the GP-P750 GM sample that I tested shut down during a short period of OPP evaluation and exploded once I tried to start it again to continue testing, with no load on its rails. Even if extended testing at high loads was the case, the engineers should use lower OPP triggering points from the moment they are well aware that the platform can handle higher than normal loads. Finally, reducing the lifespan is an entirely different story from exploding parts, which clearly shows a problem with the OPP setting, which GIGABYTE believes is the culprit.
GIGABYTE: GIGABYTE has made adjustments and lowered the OPP on GP-P850GM and GP-P750GM…. from 120% ~ 150% to 110% ~ 120%
Aris response: GIGABYTE noticed, after our findings, that the platforms cannot withstand a 120%-150% OPP rating and decided to lower it. The problem is that 110%-120% OPP is impossible with analog controllers, which use resistors to adjust OPP. These resistors drift with temperature. In other words, their resistance changes according to the operating conditions, so it is impossible to achieve such a small OPP range under both cold and hot conditions. The only way to achieve a tightly set OPP is through digital circuits, an MCU. Finally, GIGABYTE doesn't mention the operating conditions under which the new OPP settings apply.
GIGABYTE: GIGABYTE would like to stress the potential issues that were reported, only seemed to occur after very long time periods of extreme load testing via DC Electronic load equipment and would not be typical of any real world usage.
Aris response: Gamer Nexus' samples died in a matter of minutes, and my sample died after a short period of OPP evaluation. Moreover, a quick look at the user reports (Newegg, forums, etc.) shows that most of these PSUs died under normal conditions. With so many failures reported on Newegg reviews, it cannot just be a coincidence.
GIGABYTE: GIGABYTE GP-P850GM and GP-P750GM PSU's included industry standard power protection designs OCP, OTP, OVP, OPP, UVP, and SCP.
Safety certification from various countries to ensure safe and stable operation of your system.
Aris response: From the moment these units have a CE certification, I would love to check the corresponding CE reports including protection features evaluation. To the best of my knowledge, no safety certification evaluates the PSU's protection features.
GIGABYTE: Despite the fact that both before & after OPP adjustment versions are reliable for real world usage
Aris response: Many users that bought these products have a different opinion and experience. Also, OPP is not there for us reviewers only, but it should protect the PSU under all conditions. Otherwise, there is no point in having this protection feature when it doesn't save the PSU. And also, who and what defines real-world usage? For me, typical use can be having my PC idle most of the time while other users play games most of the time, stressing the entire system. Other users can run tests with Furmark and Prime95 at the same time. My point is, real-world usage varies from user to user.
GIGABYTE: Serial Number below can apply for Return and Exchange service
Aris response: GIGABYTE had made OPP changes to some production batches but didn't inform the people that bought units with high OPP about this or even give them the chance to replace their units, just to be on the safe side. They applied a silent fix, and this means that they were troubled enough to do it.
Conclusion: This is not just a badly set OPP since many units died under moderate loads and within short periods. I strongly believe that this is just a bad design, the FETs are not driven correctly, and although in quick pre-checks and normal conditions, the PSU can be ok, there are cases (not only under stress) where they fail. The timing of the FETs is not correct, and this is due to a lousy gate driver or a lousy implementation. Of course, I cannot be dead sure without any samples, older and newer generations, in my hands to test and break apart for failure analysis.
This article explains the problem I described above in detail.
View at TechPowerUp Main Site
