• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

3DMark (2013)

Status
Not open for further replies.
hd 6990

Can you please update my score? slight overclock from 1050 to 1150Mhz on the 7970's.

I do not know if I can but I rather not freeze pc you know what is the cooler amd hd 6990 not:) I can max 880 mhz but I will start to flash so I do not know VCOM is my problem matrix gigabyte 990X-UD3 know if it is at that moment, or should I better buy
 
5970 only

Did a 5970 only test:

acperience7|113519|13943|5253|Radeon HD 5970 2GB|AMD Phenom 965|850/1200|3712 MHz


5970only.png
 
J_AN_O said:
Can you please update my score? slight overclock from 1050 to 1150Mhz on the 7970's.

I do not know if I can but I rather not freeze pc you know what is the cooler amd hd 6990 not:) I can max 880 mhz but I will start to flash so I do not know VCOM is my problem matrix gigabyte 990X-UD3 know if it is at that moment, or should I better buy
Click to expand...

You have to run the benchmark using your overclock and provide link results verification.

__________
updated everyone, if not pm or post in proper fashion ty.
 
hd 6990 help

natr0n said:
You have to run the benchmark using your overclock and provide link results verification.

__________
updated everyone, if not pm or post in proper fashion ty.
Click to expand...



thank you I'm going to try it :)
But I have a problem when a test fire strike what it's like Home Videos meets upstairs has advantages to Windows and wrote the error.

further turn on the computer and subsequently zapniti games so my computer freezes (13.2 beta 5 driver - does not happen to know if the number of people stymto problems is probably better to have a 13.1 I do not know whether this is a trick of times I have to restart kym on.

then amd over drive shows me only one instead of two graphics.
 
My 24/7 settings pretty much. MAKE SURE To ENABLE HPET in bios under AHCI SETTINGS! that prevents crashing if you have hardware monitoring enabled for me.
Gabkicks|136734|20402|6493|GTX 670 2GB|i7 920|1267/1701|3802 MHz

http://www.3dmark.com/3dm/181492

25uh11l.jpg
 
Last edited:
Don't know why but 3dmark crashes when loading the CloudGate demo on my AGP rig. Disabled HW monitoring and have HPET enabled. :ohwell:

Anyway:

TRWOV|64202|---|N/A|Radeon HD4670 AGP|QX6800|825/1100|3192 MHz

capture004w.jpg
 
12.4 catalyst is fairly ancient... We haven't tested with it. We used 13.1 Legacy driver for testing and HD 4xxx cards worked with that - even cloud gate.
 
Last edited:
FM_Jarnis said:
12.4 catalyst is fairly ancient... We haven't tested with it. We used 13.1 Legacy driver for testing and HD 4xxx cards worked with that - even cloud gate.
Click to expand...

Not that I expected it to but I find it amusing that the loading screen crashes. :laugh:
 
Last edited:
I have been having some bad scores in Fire Strike with 6850 CF, only ~2300
And there is some flickering problem with the smoke
Any ideas..
 
All taxing benchmarks have crazy insane stuttering on my 7970s, and have on pretty much every single driver revision.

If a benchmark can drive my FPS much below 60, there's a good chance that it's going to stutter like hell on my 7970s. 3dmark11 extreme preset actually doesn't look much smoother with CF enabled than it does disabled - even though the average fps doubles.

Fire Strike Extreme stutters fairly badly at points on my rig now too. I figure AMD knows benchmarks are about churning out fps and so they don't care to actually smooth out the performance (I'm assuming it would cost them something in terms of fps scaling to do so).

I believe the smoke flickering is a known issue right now - not sure if it's driver or benchmark related. Some runs have smoke flickering for me, some don't.
 
TPU hey guys I've always had this curiosity and I would like you to help me is about Nvidia panel Global Settings which is the best settings for 3DMark 11 or Benchmark and currently I have 2 GTX 660 Ti Power Edition OC SLI and then hope we can all plus we help Nvidia 600 Series Cards!
 
These are my tests with this CPU i5 3570K & 2 Power Edition GTX 660 Ti Oc MSi

Fire%20Strike%20completo.png
 
Is there a problem with Tri Fire HD6900 cards ? I am getting way lower score with HD 6990 + HD 6970 compared to HD 6990 alone :confused:

Edit: using 13.2 Beta 6
 
HD4870 said:
Is there a problem with Tri Fire HD6900 cards ? I am getting way lower score with HD 6990 + HD 6970 compared to HD 6990 alone :confused:

Edit: using 13.2 Beta 6
Click to expand...

Driver issue, 3 cards do not work period, score near one card. Two cards works fine.
 
cadaveca said:
Driver issue, 3 cards do not work period, score near one card. Two cards works fine.
Click to expand...

Yeah I figured that. I should contact Futuremark support and let them know.

It is funny because they have an achievement for running 3 GPUs :laugh:
 
68996537.png
 
FM_Jarnis said:
Actually it might turn out to be more complex. We're working on the issues that came up 3/4 cards with NVIDIA and AMD and have made some progress... hope to have further news on this next week.
Click to expand...

Thanks for the info Jarnis, I've been waiting to do some more benching! ;)

You'll start seeing this in my memory reviews soon, too.:rockout:
 
Status
Not open for further replies.
Back
Top