4ghz Club

[fatguy1992]

I was bored this afternoon so I played with my W3570, still only air cooling, can't wait for my cascade to come back, so boring without it.

 

[belitsky]

Belitsky| i5 750 | 4000 | Scythe Mugen II

 

[(FIH) The Don]

been awhile since anyone posted something here

 

[Deleted member 74752]

Something to gander at...

 

[(FIH) The Don]

nice bro, what cooling?

 

[Deleted member 74752]

nice bro, what cooling?

Coolit Boreas atm, but it can be done on regular water cooled loop or a good air cooler as well.

 

[aCid888*]

Easy 4GHz.

 

[Deleted member 74752]

Here is a screen with RealTemp...

 

[Lionheart]

Hey guys, do you's think I have too much voltage on the 920?

 

[HammerON]

It does seem a little high, however each 920 is differnet. I believe Paulieg and Binge have made several posts about how 920's really vary in VCore.
Run LinX and see what temps you get.

 

[(FIH) The Don]

thats is quite high for a DO

have a friend who does 4.1 on 1.125+-

is it unstable under that voltage or is it first try?

 

[Lionheart]

thats is quite high for a DO

have a friend who does 4.1 on 1.125+-

is it unstable under that voltage or is it first try?

http://img.techpowerup.org/100306/super pi 4.2.jpg

Actually I started at around 1.36v @ 4GHZ, ran some test and it wasnt stable so I increased the voltage to 1.375, booted the system again, ran some test again, wasnt stable so I increased the voltage to 1.388v or something like that, it ran the tests longer and I was started to get happy but it BSOD so I tried one more time and set it too 1.41v and it was finally stable, MAX load CPU temps were 75C - 79C, cores were slightly higher.

Just wish I didnt have to use so much voltage, increashed temps more than I thought!

 

[(FIH) The Don]

do you use XMP on the memory?

 

[Lionheart]

do you use XMP on the memory?

Nah man, I dont have it on that setting.

My RAM is running at 1524mhz, XMP runs at 1866mhz and apparently this MB wont wrk at that speed!

PS. how the hell did ur friend manage those voltages at that speed?

 

[(FIH) The Don]

hmm okay, just got another friend with RIIE board, dominators and a i7 920 do, and when he turns on XMP on that board all hell breaks loose

you remember to turn off eist, C1E, spread spectrum etc?

and my friend got one of the cpus from the best batch in the world, or one of them

 

[Deleted member 74752]

Nah man, I dont have it on that setting.

My RAM is running at 1524mhz, XMP runs at 1866mhz and apparently this MB wont wrk at that speed!

PS. how the hell did ur friend manage those voltages at that speed?

Can you post a RealTemp screen? It looks like your hsf is not seated properly or is not up to snuff.

 

[Lionheart]

hmm okay, just got another friend with RIIE board, dominators and a i7 920 do, and when he turns on XMP on that board all hell breaks loose

you remember to turn off eist, C1E, spread spectrum etc?

and my friend got one of the cpus from the best batch in the world, or one of them

Not sure what eist is, couldnt find it in the BIOS settings unless Im blind but C1E & speed spectrum are both disabled.

Yeah your friend sure has some luck, would be nice to have that!

PS. thanx for the help too!

Can you post a RealTemp screen? It looks like your hsf is not seated properly or is not up to snuff.

I will double check it and post some screenies soon.

 

[(FIH) The Don]

NP man, glad to help with what i can :laugh;

take a look here if you havent already http://forums.techpowerup.com/showthread.php?t=108526

i use it from time to time to refresh the basics for i7 oc'ing

 

[Chicken Patty]

Hey guys, do you's think I have too much voltage on the 920?


http://img.techpowerup.org/100306/My Overclock.jpg

You should post a BIOS template with your settings, something is off there. I know they can vary a lot, especially later batches need more vcore, but I think that's just too much.

hmm okay, just got another friend with RIIE board, dominators and a i7 920 do, and when he turns on XMP on that board all hell breaks loose

you remember to turn off eist, C1E, spread spectrum etc?

and my friend got one of the cpus from the best batch in the world, or one of them

On XS there is a member by the username of "IMO". He has a i7 that does 4.2 GHz @ about that voltage, it's insane!

 

[Lionheart]

You should post a BIOS template with your settings, something is off there. I know they can vary a lot, especially later batches need more vcore, but I think that's just too much.



On XS there is a member by the username of "IMO". He has a i7 that does 4.2 GHz @ about that voltage, it's insane!

How do I get a BIOS Template?

 

[Chicken Patty]

How do I get a BIOS Template?

This should be it. Fill it out and post it. This way we can see exactly what you are doing.

http://i4memory.com/f54/asus-rampage-extreme-bios-template-15803/

 

[Lionheart]

This should be it. Fill it out and post it. This way we can see exactly what you are doing.

http://i4memory.com/f54/asus-rampage-extreme-bios-template-15803/

Im using the Rampage II Extreme, not the first one, would it make any difference?

 

[Chicken Patty]

Im using the Rampage II Extreme, not the first one, would it make any difference?

You can try posting as much info as possible, sure lot of the BIOS settings are shared. IF not google for a template for your board.

 

[FilipM]

Hey guys, do you's think I have too much voltage on the 920?


http://img.techpowerup.org/100306/My Overclock.jpg

How do you get 190.5 BCLK?

 

[mastrdrver]

Im using the Rampage II Extreme, not the first one, would it make any difference?

Here is the template for you. Just leave the "code" tags around it. Don't forget to list what Bios your using if different.

Asus RAMPAGE 2 EXTREME
1639 Bios Template

****************************
AI Tweaker
****************************
AI Overclock Tuner: Manual
CPU Ratio Setting: 20
BCLK Frequency: 133
PCIE Frequency: 100
DRAM Frequency: DDR3-1066Mhz
UCLK Frequency: 2133Mhz
QPI Link Data Rate: AUTO

*******************
DRAM Timing Control
*******************
DRAM CAS Latency: 7 DRAM Clock
DRAM RAS# to CAS# Delay : 7 DRAM Clock
DRAM RAS# PRE Time: 7 DRAM Clock
DRAM RAS# ACT Time: 24 DRAM Clock
DRAM RAS# to RAS# Delay: AUTO
DRAM REF Cycle Time: AUTO
DRAM WRITE Recovery Time: AUTO
DRAM READ to PRE Time: AUTO
DRAM FOUR ACT WIN Time: AUTO
DRAM Back-To-Back CAS# Delay: AUTO

DRAM Timing Mode: AUTO
DRAM Round Trip Latency on CHA: AUTO
DRAM Round Trip Latency on CHB: AUTO
DRAM Round Trip Latency on CHC: AUTO

DRAM WRITE To READ Delay(DD): AUTO
DRAM WRITE To READ Delay(DR): AUTO
DRAM WRITE To READ Delay(SR): AUTO
DRAM READ To WRITE Delay (DD): AUTO
DRAM READ To WRITE Delay (DR): AUTO
DRAM READ To WRITE Delay (SR): AUTO
DRAM READ To READ Delay(DD): AUTO
DRAM READ To READ Delay(DR): AUTO
DRAM READ To READ Delay(SR): AUTO
DRAM WRITE To WRITE Delay(DD): AUTO
DRAM WRITE To WRITE Delay(DR): AUTO
DRAM WRITE To WRITE Delay(SR): AUTO

****************************
CPU Voltage: AUTO
CPU PLL Voltage: 1.80
QPI/DRAM Core Voltage: 1.20
IOH Voltage: 1.10
IOH PCIE Voltage: 1.50
ICH Voltage: 1.10
ICH PCIE Voltage: 1.50
DRAM Bus Voltage: 1.60
DRAM DATA REF Voltage on CHA: AUTO
DRAM CTRL REF Voltage on CHA: AUTO
DRAM DATA REF Voltage on CHB: AUTO
DRAM CTRL REF Voltage on CHB: AUTO
DRAM DATA REF Voltage on CHC: AUTO
DRAM CTRL REF Voltage on CHC: AUTO
****************************
Load-Line Calibration: AUTO
CPU Differential Amplitude: AUTO
CPU Clock Skew: AUTO
CPU Spread Spectrum: Disabled
IOH Clock Skew: AUTO
PCIE Spread Spectrum: Disabled

CPU Advance Settings
C1E Support: Disabled
Hardware Prefetcher: Enabled
Adjacent Cache Line Prefetcher: Enabled
Intel (R) Virtualization Tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
Intel (R) HT Technology: Enabled
Active Processor Cores: ALL
A20M: Disabled
Intel (R) C-State Tech: Disabled
****************************