5600 Memory OC

[RaceT3ch]

Hey guys, I heard I should OC my memory to get more performance out of my PC, and is supposed to gain more performance than OC'ing my CPU. However, I have a lot of questions.
1. Whats the matter with Samsung and Hynix? Whats different with them when it comes to overclocking?

2. My motherboard says it only supports 3200, can I get past 3200 or not? (Motherboard: https://www.gigabyte.com/au/Motherboard/GA-AX370-Gaming-5-rev-10#kf)
3. If it is possible to get more performance, how should I do it? Timings? Speed?
4. What would be the best program to test stability?

 

[Taraquin]

You have 1 16gb stick? Getting 2 will help a lot since you can run dual channel then.

Hynix can be many things, but if you are lucky it is Hynix CJR or DJR which overclocks well.

Do you know where to input timings in bios?

 

[RaceT3ch]

You have 1 16gb stick? Getting 2 will help a lot since you can run dual channel then.

Hynix can be many things, but if you are lucky it is Hynix CJR or DJR which overclocks well.

Do you know where to input timings in bios?

I have 2, don't worry.
I know where to type values in my bios though.
What should I test 1st?

 

[Taraquin]

Try setting ramspeed to 3600 and fclk to 1800. Newest bios is also recpmmended.
Set:
Cl 16
Rcd 20
Rp 20
Ras 36
Rc 56
Rrds 4
Rrdl 6
Faw 16
Wr 16
Rtp 8
Rfc 560 (if this is DJR 400-450 will work)
Cwl 16
Rdwr 10
Wrrd 4

Set ram voltage to 1.35v
Set soc voltahe to 1.1v
Set vddg iod and ccd to 1.0v
Set vddp to 0.9v

If this works you can try 3800 speed and 1900 fclk, but you must raise rcd and rp to 21, ras to 39 and rc to 60. Keep rest of timings equal. If 3800 does not boot try 3733 and 1866.

 

[RaceT3ch]

Try setting ramspeed to 3600 and fclk to 1800. Newest bios is also recpmmended.
Set:
Cl 16
Rcd 20
Rp 20
Ras 36
Rc 56
Rrds 4
Rrdl 6
Faw 16
Wr 16
Rtp 8
Rfc 560 (if this is DJR 400-450 will work)
Cwl 16
Rdwr 10
Wrrd 4

Set ram voltage to 1.35v
Set soc voltahe to 1.1v
Set vddg iod and ccd to 1.0v
Set vddp to 0.9v

If this works you can try 3800 speed and 1900 fclk, but you must raise rcd and rp to 21, ras to 39 and rc to 60. Keep rest of timings equal. If 3800 does not boot try 3733 and 1866.

Thanks for the suggested settings, you sure it'll work despite my motherboard having its limit set to 3200?
I need to save my fan curves before I test it so just hang on

Thanks for the suggested settings, you sure it'll work despite my motherboard having its limit set to 3200?
I need to save my fan curves before I test it so just hang on

Well, my motherboard has way different values/names, which ones do I type in?

 

[Apocalypsee]

Thanks for the suggested settings, you sure it'll work despite my motherboard having its limit set to 3200?
I need to save my fan curves before I test it so just hang on


Well, my motherboard has way different values, which one do I type in?

It's fine to clock higher than the recommended speed. My Hynix CJR 3200 runs at 4000 but high CL20 at 1.38V

Try the primary timing first (the top 5), use what Taraquiin suggested, but once at a time. tRCDRD is RCD on what he said. Use something like TestMEM5 TM5 (you can Google)