Whatever then, I know terminology well. No need to be annoying.
Your arguments show something else. And if you find people countering your arguments "annoying", that's on you, not me.
Becasue that used to be how laptop cards were connected. As far as I know there was MXM 1060, so it's quite recent stuff
MXM had its heyday around 2010, with ever-dwindling use since then. Also, please note that the 1060 launched 6 years ago. That's quite a while - and even back then it was exceedingly rare.
and because Alibaba specials used MXM to PCIe adapters to basically create what RX 6400 and RX 6500 XT are. Conceptually the same shit.
But that's the thing: they aren't whatsoever. Not even close. I'm arguing against you saying this because it is
utter and complete nonsense.
Again with the spoon-feeding:
- On the one hand you have a GPU die, on a package. It has specifications and requirements around which a PCB is made to hold its required ancillary components - RAM, VRMs, display pipeline processing, etc., and through which traces are run to components and connectors.
- On the other hand, you have a pre-made mobile GPU board, complete with RAM, VRMs, ancillary components, and an interface (MXM, i.e. mobile PCIe x8 with some extras), to which an adapter board is made taking the display signals sent over the interface and making them into outputs, providing a power input, and running traces from the MXM slot to a PCIe slot.
Now, which of these is the most apt comparison to the RX 6500 XT and 6400? The former. Because it is
exactly what they are. Conceptually they have
nothing in common with an MXM adapter+MXM GPU. Nothing at all. The made-for-mobile part here is
the design of the silicon itself, which is mainly a way of explaining and understanding its strange design tradeoffs. That doesn't mean that AMD didn't plan desktop implementations from the get-go - they clearly did, as they have come to market much faster than the mobile variants. But the design has some tell-tale signs towards being
mainly designed for pairing with AMD's 6000-series APUs in a laptop.
This is 6400, a watt or two difference is nothing.
I'm not talking about this specific implementation, I'm talking about the rationale behind designing the Navi 24 die as weirdly as they did. I'm not saying it makes sense, I'm saying that this is the likely explanation.
And that shows that you don't save anything. Those connectors are in milliwatt range.
Connectors, PHYs, controllers, and more, it all adds up. And in a strictly made-for-purpose design, such cuts are sometimes made. Again: not saying it makes sense in a larger context, only trying to understand the rationales surrounding this design.
lol I can saw off that connector, dude, there's no real design there to be done. You can literally change it in Paint and it will work.
.... do you think PCBs are designed in MSPaint?
And yes, obviously you can cut it off. Depending on your skills and tools, that might be faster than doing this properly in the design phase, especially as this will then entail additional QC.
And they are either much slower, old (therefore you lack encoding/decoding) or more expensive. Only 1050 Ti is truly competitive, it's the only alternative. And I wrote that CPU recording is too heavy on CPU. Do you even read what I write? You might as well not reply if you don't.
... so now there aren't that many options? Because, to refresh your memory, this whole branch of the discussion started out with someone paraphrasign you, saying "You basically said that almost every modern graphics card except for the 6400 and 6500 XT has some kind of video encoder in it, which is true. How many more options do you need?" So ... is this bad because it's much worse than everything else, or is it bad because it's failing to provide a much-needed, missing function in this market segment? It's one or the other, as those options are mutually exclusive.
Which is literally what makes mobile chip. You have no point to make, other than troll and nitpick.
No. On a silicon level, for PC hardware, there is no such thing as a "mobile chip". You can say it's a mobile-first design, you can say it prioritizes mobile-friedly features, but
mobile chip literally doesn't work, as it excludes non-mobile use cases. There are no PC silicon manufacturers (CPUs, APUs, GPUs) who don't implement their silicon in
both mobile
and desktop versions. The
same silicon. Navi 24 is a mobile-first design, quite clearly. It is not a "mobile chip". And this isn't nit-picking, as the difference between the two is meaningful and entirely undermines your arguments.
That's the most sensible response to being proven wrong I've seen from you in a while. Thanks!
Weren't their production restarted? Even 730 made a legendary come back.
They might have become, but what you're quoting already accounts for that.
Even more reasons not to make e-waste like RX 6400 then.
No, AMD should just have made a better die design. It's sad, really - this die has massive potential, but it's flawed in some really bad ways.
TPU database literally showing no difference. Perhaps HWUB's test just had more RX 6400 friendly games. And your own source only has like 30% difference, no need to exaggerate it.
There's something wrong with the TPU DB entry there, as it doesn't align with TPU's own benchmark results - they show it ~matching the 1650, yet the database shows the 1650 as 22% faster. The entry is wrong, somehow.
Also, it's kind of ...odd? to reference the database result rather than actual test results when you're in the comments thread for that review. Just saying.