Close call... 5090 Burnt Cable

Frizz · 2025-03-22T14:57:42+0000

You wouldn't think it would happen to you until it does... I was reading about 12VHPWR volts on HWINFO and people were saying that you should worry if it's around 11.5 or below at full 600W Load... WHICH my card was using this EZDIY Fab connector... and at idle it was at 11.913.... So I checked my connections and the cable was VERY hard to remove, once I got it out I found the below.. the PSU cables and connector on the card itself is fine but this connector almost got fried.

Anyway moving on, I decided to then plug in the corsair 12v6x2 cable my PSU came with.. now its idling at 12.045 and Load 11.802-11.731 original was 11.9/11.5 MASSIVE Difference!

Becareful out there everyone aesthetics just isn't something to play with on this card unfortunately.

Solaris17 · 2025-03-22T15:00:41+0000

Its a good warning and lesson. You are braver than I. I told myself when the 4xxx series launched I will never use the pretty or 3rd party cables.

Hereticbar · 2025-03-22T15:10:15+0000

I am using this 12VHPWR cable from Seasonic on my Prime 1000w power supply. It might not be pretty but it is cheap and made by the manufacturer of the power supply, I am betting that Seasonic know what they are doing.

If it is up to me I would advise people to stay away from third party adaptors, they might look pretty and neat for tidy cable management but it is not worth the risk.

evernessince · 2025-03-22T15:15:36+0000

Hereticbar said:
I am using this 12VHPWR cable from Seasonic on my Prime 1000w power supply. It might not be pretty but it is cheap and made by the manufacturer of the power supply, I am betting that Seasonic know what they are doing.

If it is up to me I would advise people to stay away from third party adaptors, they might look pretty and neat for tidy cable management but it is not worth the risk.

View attachment 391011

It doesn't really matter whether it's an official cable or not, the Nvidia reddit has reports of both equally burning up with the 5090.

It's all fun and games until Nvidia denies your $2,500 card's warranty for user error or it happens just outside of warranty.

The connector is just trash.

Toss · 2025-03-22T15:17:57+0000

lol you are literally one 5090 in the wild and got melted. WTF

Hereticbar said:
I am using this 12VHPWR cable from Seasonic on my Prime 1000w power supply. It might not be pretty but it is cheap and made by the manufacturer of the power supply, I am betting that Seasonic know what they are doing.

If it is up to me I would advise people to stay away from third party adaptors, they might look pretty and neat for tidy cable management but it is not worth the risk.

View attachment 391011

it's not about cable. It's about that garbage is 400W standard, not 600.
Only way to run 5090 is power limit to 400W TDP

Frizz · 2025-03-22T15:19:25+0000

Further more.. my card is now able to pass timespy at 3100mhz+ core clocks... it wasnt able to do 113+ on afterburner before now it does 220+

AND the coil whine is almost completely gone with the ezdiyfab cable the coil whine was super loud!

Toss · 2025-03-22T15:20:13+0000

Frizz said:
Further more.. my card is now stable at 3100mhz+ core clocks... it wouldnt be able to do 113 on afterburner before now it does 220+

your card is not stable, it melted.

Frizz · 2025-03-22T15:23:31+0000

Toss said:
your card is not stable, it melted.

Lol reworded

A Computer Guy · 2025-03-22T15:26:41+0000

Frizz said:
You wouldn't think it would happen to you until it does... I was reading about 12VHPWR volts on HWINFO and people were saying that you should worry if it's around 11.5 or below at full 600W Load... WHICH my card was using this EZDIY Fab connector... and at idle it was at 11.913.... So I checked my connections and the cable was VERY hard to remove, once I got it out I found the below.. the PSU cables and connector on the card itself is fine but this connector almost got fried.

Anyway moving on, I decided to then plug in the corsair 12v6x2 cable my PSU came with.. now its idling at 12.045 and Load 11.802-11.731 original was 11.9/11.5 MASSIVE Difference!

Becareful out there everyone aesthetics just isn't something to play with on this card unfortunately.

View attachment 391004

So now the big questions...

Did you attempt to clean the GPU part of the connector afterwards before using the new cable? (with some kind of contact cleaner)
If not cleaned aren't you still concerned that even with a new cable attached you might have unbalanced load between the pins because of debris or impurities on the surfaces of the GPU power pins that may increase contact resistance?

phanbuey · 2025-03-22T15:27:20+0000

I had the same issue with stock cables and the 4090 dongle - same issue except at the dongle and not at the card -- cable melted and melted a PSU power port. There doesn't seem to be any reliable way of fully avoiding the issues - I don't buy the whole "it's third party cables" bs. Derbauer recreated it as well and anything that pulls under 450W doesn't seem to have any issues at all.

Toss · 2025-03-22T15:31:52+0000

could you furmark 24 hours to be sure?

Solaris17 · 2025-03-22T15:34:27+0000

Toss said:
could you furmark 2 hours to be sure?

Only if watching it the entire time :laugh:

Toss · 2025-03-22T15:35:38+0000

Solaris17 said:
Only if watching it the entire time

with FLIR. I would watch livestream of it

Chomiq · 2025-03-22T15:36:21+0000

Toss said:
could you furmark 24 hours to be sure?

Frizz · 2025-03-22T15:40:15+0000

phanbuey said:
I had the same issue with stock cables and the 4090 dongle - same issue except at the dongle and not at the card -- cable melted and melted a PSU power port. There doesn't seem to be any reliable way of fully avoiding the issues - I don't buy the whole "it's third party cables" bs. Derbauer recreated it as well and anything that pulls under 450W doesn't seem to have any issues at all.

Yeah dont I doubt it either ive already got a undervolt profile which pulls below 450w that ill be sticking to for 24/7 use even then still concerned.

Caring1 · 2025-03-22T15:40:15+0000

Frizz said:
You wouldn't think it would happen to you until it does... I was reading about 12VHPWR volts on HWINFO and people were saying that you should worry if it's around 11.5 or below at full 600W Load... WHICH my card was using this EZDIY Fab connector... and at idle it was at 11.913.... So I checked my connections and the cable was VERY hard to remove, once I got it out I found the below.. the PSU cables and connector on the card itself is fine but this connector almost got fried.

Anyway moving on, I decided to then plug in the corsair 12v6x2 cable my PSU came with.. now its idling at 12.045 and Load 11.802-11.731 original was 11.9/11.5 MASSIVE Difference!

Becareful out there everyone aesthetics just isn't something to play with on this card unfortunately.

Is this after you installed the water block?
I was just wondering if running cooler allowed it to draw more power?

Frizz · 2025-03-22T15:41:13+0000

Caring1 said:
Is this after you installed the water block?
I was just wondering if running cooler allowed it to draw more power?

With the way its behaving.. and me seeing new heights in 3dmark this is totally new behaviour from since day 1.

A Computer Guy said:
So now the big questions...

Did you attempt to clean the GPU part of the connector afterwards before using the new cable? (with some kind of contact cleaner)

If not cleaned aren't you still concerned that even with a new cable attached you might have unbalanced load between the pins because of debris or impurities on the surfaces of the GPU power pins that may increase contact resistance?

There were bits of white plastic on the walls of the most burnt connector but the pins and housing were visibly fine. My biggest telling sign is the massive improvment in 12pin voltages and general stability. But will be undervolting the card for the rest of its life for 24/7 use moving forward and will wait for a card thst doesnt use 12vhpwr in future lol

Toss said:
with FLIR. I would watch livestream of it

I bet youre the type to laugh at your own friends misfortunes

dartuil · 2025-03-22T16:05:14+0000

Toss said:
could you furmark 24 hours to be sure?

crazy to furmark 24hrs

ir_cow · 2025-03-22T16:16:25+0000

3rd party cables give your 3rd party problems

InfaRedd · 2025-03-22T16:38:58+0000

Does Nvidia provide their own 12v6x2 cable with the 5090?

SoM6 · 2025-03-22T17:04:38+0000

i'm using this cable https://www.amazon.com/12VHPWR-Basic-90-Degree-Cable/dp/B0CK6TPWJT?th=1 with my 4090, no problem, PC is on 24x7
edit; PSU is RM850x

Frizz · 2025-03-22T17:07:56+0000

SoM6 said:
i'm using this cable https://www.amazon.com/12VHPWR-Basic-90-Degree-Cable/dp/B0CK6TPWJT?th=1 with my 4090, no problem, PC is on 24x7

Thanks I'll take a look into cable mod

remekra · 2025-03-22T17:12:13+0000

On my 5080 I needed 90 degrees cable as well, thankfully I have be quiet PSU and they sell that cable for their PSUs:

Not very pretty but so far no problems and I saw that 5080 can also burn.

Glad that your GPU still works!

I know that every cable can burn basically but well in case of warranty they cannot claim that I used wrong cable

Frizz · 2025-03-22T17:23:35+0000

remekra said:
On my 5080 I needed 90 degrees cable as well, thankfully I have be quiet PSU and they sell that cable for their PSUs:

View attachment 391018

Not very pretty but so far no problems and I saw that 5080 can also burn.

Glad that your GPU still works!

I know that every cable can burn basically but well in case of warranty they cannot claim that I used wrong cable

Yeah cant find a corsair one but will stick to the og psu cable for now since its droop is only around 300 whereas the third party one was 600 mv droop lol

lexluthermiester · 2025-03-22T19:19:14+0000

Toss said:
could you furmark 24 hours to be sure?

Are you nuts? No. 15minutes is all anyone needs for a Furmark test. 24 hours is complete lunacy.

System Name	Panda? Storm Trooper?
Processor	Intel 285K Overclocked
Motherboard	ASUS STRIX Z890-A GAMING WIFI
Cooling	AC Core 1 CPU Block \| Heatkiller Radiators 2x 360-45mm 1x 240-30mm \|AC Core 120mm Reservoir
Memory	48GB 8400MHz Corsair Vengeance DDR5 CUDIMM CL40 -
Video Card(s)	RTX 5090 32GB Palit Gamerock w/ Alpha Core Waterblock
Storage	4TB WD Black NVME Gen 4 + 14TB WD HDD
Display(s)	ASUS PG32UDCP 32" QD-OLED 240hz/480hz
Case	HYTE Y70 Panda + ColdZero AF Front Panel
Audio Device(s)	2i2 Scarlett Solo + Schiit Magni 3 AMP
Power Supply	Corsair RM1200x Shift White
Keyboard	NEO75CU White + PBTFans Neon R2 Glitter + BSUN Macaron Switches

System Name	RogueOne
Processor	Xeon W9-3495x
Motherboard	ASUS w790E Sage SE
Cooling	SilverStone XE360-4677
Memory	128gb Gskill Zeta R5 DDR5 RDIMMs
Video Card(s)	MSI SUPRIM Liquid X 4090
Storage	1x 2TB WD SN850X \| 2x 8TB GAMMIX S70
Display(s)	49" Philips Evnia OLED (49M2C8900)
Case	Thermaltake Core P3 Pro Snow
Audio Device(s)	Moondrop S8's on schitt Gunnr
Power Supply	Seasonic Prime TX-1600
Mouse	Razer Viper mini signature edition (mercury white)
Keyboard	Monsgeek M3 Lavender, Moondrop Luna lights
VR HMD	Quest 3
Software	Windows 11 Pro Workstation
Benchmark Scores	I dont have time for that.

System Name	Bargain System
Processor	AMD Ryzen 7 5800X3D
Motherboard	MSI MPG B550 Gaming Plus
Cooling	Deepcool LT720 360mm
Memory	32GB Corsair Dominator Platinum DDR4 3600Mhz
Video Card(s)	AX Gaming RTX 5070 Ti \| Sapphire RX 9070 XT Nitro+
Storage	Western Digital SN850X
Display(s)	Acer Nitro 34" Ultrawide \| Samsung Odyssey G5 27"
Case	Lianli O11 Dynamic Evo White
Audio Device(s)	HiVi Swans OS-10 Bookshelf Speakers
Power Supply	Seasonic Prime GX-1000 80+ Gold
Mouse	Razer Ultimate \| Razer Naga Pro
Keyboard	Razer Huntsman Tournament Edition

Processor	Ryzen 7800X3D
Motherboard	ASRock X670E Taichi
Cooling	Noctua NH-D15 Chromax
Memory	32GB DDR5 6000 CL30
Video Card(s)	MSI RTX 4090 Trio
Storage	P5800X 1.6TB 4x 15.36TB Micron 9300 Pro 4x WD Black 8TB M.2
Display(s)	Acer Predator XB3 27" 240 Hz
Case	Thermaltake Core X9
Audio Device(s)	JDS Element IV, DCA Aeon II
Power Supply	Seasonic Prime Titanium 850w
Mouse	PMM P-305
Keyboard	Wooting HE60
VR HMD	Valve Index
Software	Win 10

System Name	Panda? Storm Trooper?
Processor	Intel 285K Overclocked
Motherboard	ASUS STRIX Z890-A GAMING WIFI
Cooling	AC Core 1 CPU Block \| Heatkiller Radiators 2x 360-45mm 1x 240-30mm \|AC Core 120mm Reservoir
Memory	48GB 8400MHz Corsair Vengeance DDR5 CUDIMM CL40 -
Video Card(s)	RTX 5090 32GB Palit Gamerock w/ Alpha Core Waterblock
Storage	4TB WD Black NVME Gen 4 + 14TB WD HDD
Display(s)	ASUS PG32UDCP 32" QD-OLED 240hz/480hz
Case	HYTE Y70 Panda + ColdZero AF Front Panel
Audio Device(s)	2i2 Scarlett Solo + Schiit Magni 3 AMP
Power Supply	Corsair RM1200x Shift White
Keyboard	NEO75CU White + PBTFans Neon R2 Glitter + BSUN Macaron Switches

Close call... 5090 Burnt Cable

Frizz

Solaris17

Super Dainty Moderator

Hereticbar

evernessince

Toss

Frizz

Toss

Frizz

A Computer Guy

phanbuey

Toss

Solaris17

Super Dainty Moderator

Toss

Chomiq

Frizz

Caring1

Frizz

dartuil

ir_cow

InfaRedd

SoM6

Frizz

remekra

Frizz

lexluthermiester

System Name	Still not a thread ripper but pretty good.
Processor	Ryzen 9 7950x, Thermal Grizzly AM5 Offset Mounting Kit, Thermal Grizzly Extreme Paste
Motherboard	ASRock B650 LiveMixer (BIOS/UEFI version P3.08, AGESA 1.2.0.2)
Cooling	EK-Quantum Velocity, EK-Quantum Reflection PC-O11, D5 PWM, EK-CoolStream PE 360, XSPC TX360
Memory	Micron DDR5-5600 ECC Unbuffered Memory (2 sticks, 64GB, MTC20C2085S1EC56BD1) + JONSBO NF-1
Video Card(s)	XFX Radeon RX 5700 & EK-Quantum Vector Radeon RX 5700 +XT & Backplate
Storage	Samsung 4TB 980 PRO, 2 x Optane 905p 1.5TB (striped), AMD Radeon RAMDisk
Display(s)	2 x 4K LG 27UL600-W (and HUANUO Dual Monitor Mount)
Case	Lian Li PC-O11 Dynamic Black (original model)
Audio Device(s)	Corsair Commander Pro for Fans, RGB, & Temp Sensors (x4)
Power Supply	Corsair RM750x
Mouse	Logitech M575
Keyboard	Corsair Strafe RGB MK.2
Software	Windows 10 Professional (64bit)
Benchmark Scores	RIP Ryzen 9 5950x, ASRock X570 Taichi (v1.06), 128GB Micron DDR4-3200 ECC UDIMM (18ASF4G72AZ-3G2F1)

System Name	stress-less
Processor	9800X3D @ 5.42GHZ
Motherboard	MSI PRO B650M-A Wifi
Cooling	Thermalright Phantom Spirit EVO
Memory	64GB DDR5 6600 1:2 CL36, FCLK 2200
Video Card(s)	RTX 4090 FE
Storage	2TB WD SN850, 4TB WD SN850X
Display(s)	Alienware 32" 4k 240hz OLED
Case	Jonsbo Z20
Audio Device(s)	Yes
Power Supply	Corsair SF750
Mouse	DeathadderV2 X Hyperspeed
Keyboard	65% HE Keyboard
Software	Windows 11
Benchmark Scores	They're pretty good, nothing crazy.

Processor	Ryzen 7 5800X3D
Motherboard	Gigabyte X570 Aorus Elite
Cooling	Thermalright Phantom Spirit 120 SE
Memory	2x16 GB Crucial Ballistix 3600 CL16 Rev E @ 3600 CL14
Video Card(s)	RTX3080 Ti FE
Storage	SX8200 Pro 1 TB, Plextor M6Pro 256 GB, WD Blue 2TB
Display(s)	LG 34GN850P-B
Case	SilverStone Primera PM01 RGB
Audio Device(s)	SoundBlaster G6 \| Fidelio X2 \| Sennheiser 6XX
Power Supply	SeaSonic Focus Plus Gold 750W
Mouse	Endgame Gear XM1R
Keyboard	Wooting Two HE

System Name	H7 Flow 2024
Processor	AMD 5800X3D
Motherboard	Asus X570 Tough Gaming
Cooling	Custom liquid
Memory	32 GB DDR4
Video Card(s)	Intel ARC A750
Storage	Crucial P5 Plus 2TB.
Display(s)	AOC 24" Freesync 1m.s. 75Hz
Mouse	Lenovo
Keyboard	Eweadn Mechanical
Software	W11 Pro 64 bit

System Name	Sillencio
Processor	AMD Ryzen 7600
Motherboard	Asrock B650M Lightning
Cooling	Thermalright Phantom Spirit ARGB
Memory	G.Skill FLARE 5200MHZ EXpo
Video Card(s)	Sapphire RX 7600 Pulse
Storage	WD NVME 1TB
Display(s)	AOC 27" LED - e2752Vq
Case	Coolermaster Silencio 652S
Power Supply	EVGA 750GT GOLD
Mouse	ADVANCE 210
Keyboard	Microsoft Sidewinder X4
Software	Windows 11 64

System Name	Daily Driver
Processor	Ryzen 7 7800X3D
Motherboard	Gigabyte B650 Aorus Elite AX V2
Cooling	Thermalright Phantom Spirit 120 EVO
Memory	G.Skill TridentZ 32 GB @ 6000MHz
Video Card(s)	Gigabyte RX 6800 XT Gaming OC
Storage	Samsung 850 EVO 500 GB, Samsung 990 Pro 1 TB
Display(s)	LG Ultragear 3440x1440 144 Hz
Case	Corsair Carbide Air 540
Audio Device(s)	Logitech Pro X
Power Supply	EVGA SuperNova P2 850w 80+ Platinum
Mouse	Razer Viper V3 Pro
Keyboard	Wooting 80 HE Zinc Alloy Black
Software	Windows 11 Pro