• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Corsair Unveils Carbide 175R RGB Mid-tower Case

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
47,670 (7.43/day)
Location
Dublin, Ireland
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard Gigabyte B550 AORUS Elite V2
Cooling DeepCool Gammax L240 V2
Memory 2x 16GB DDR4-3200
Video Card(s) Galax RTX 4070 Ti EX
Storage Samsung 990 1TB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
Corsair updated its entry-level case lineup with the new Carbide 175R RGB (model: CC-9011171-WW). Positioned between its popular 100R and 275R cases and priced at USD $60, the 175R brings many of the features found on a higher priced segment to this one, such as RGB LED embellishments, a faux brushed-metal facade, and a fully enclosed bottom compartment. The front features an RGB LED illuminated company logo with intakes positioned along the top and bottom edges. One of the case's three 120 mm front intakes has a factory-fitted 120 mm fan with RGB LED illumination. Two 140/120 mm top exhausts, and a rear 120 mm exhaust make for the rest of the ventilation.

The left side panel is tempered glass with a dark tint. Inside, the Corsair Carbide 175R RGB features a conventional horizontally partitioned layout with a complete enclosure of the bottom compartment. Storage areas include two 3.5-inch/2.5-inch bays, and two 2.5-inch mounts behind the motherboard tray. Front-panel connectivity includes two USB 3.0 ports (standard header) and a HDA audio combi-jack. Corsair includes dust filters for the top vents and PSU intake. The front panel logo and included fan support 3-pin addressable-RGB input letting you plug them directly to your motherboard for software control.



View at TechPowerUp Main Site
 
nice design but there's little to no side intake ports for fresh air to keep the inside temps cool. Sorry Corsair, but I rather take the 275R over this one any day.
 
They're doing it all wrong (still).
If they want a fancy closed front façade, then make the intake underneath and exhaust on top, filters will solve any dust issues.
It may require lateral thinking and a redesign of the internal component placement, probably why they don't do it, thinking isn't their strong point.
 
91Q246zr0pL._SL1500_.jpg

916nXe4U2AL._SL1500_.jpg
 
This case reminds me very much of the Cougar MX330-G minus the good airflow and 5.25" drive bay support.
 
Well i got lost in myriad of mini/midi/mega/giga towers.
 
]
Looking in that front grill it looks like a bar heater I have in the bathroom
Maybe it can serve multiple purposes...
Although I doubt it'll be convenient to game while sitting on the bog...
 
I still don't understand how "not enough" air space determinations can be made from a picture, especially ones that don't show the openings. Saw the same comments when the 600S came out and testing certainly didn't bear out this assumption


Start at the 5:25 mark

Front Panel in Place = 271 fpm
Front Panel Opened = 281 fpm
Front Panel Removed = 281 fpm .... Front panel reduces flow 3.5%
Dust Filter removed = 300 fpm ... biggest impact
Grille Removed = 313 fpm
 
I still don't understand how "not enough" air space determinations can be made from a picture, especially ones that don't show the openings. Saw the same comments when the 600S came out and testing certainly didn't bear out this assumption


Start at the 5:25 mark

Front Panel in Place = 271 fpm
Front Panel Opened = 281 fpm
Front Panel Removed = 281 fpm .... Front panel reduces flow 3.5%
Dust Filter removed = 300 fpm ... biggest impact
Grille Removed = 313 fpm

So you buy a case, have to open the front panel, potentially remove it, remove dust filters, and the grill to get suitable fpm? It's a simplistic fault that manufacturers continue to make... Go back to the basics, its that simple.
 
So you buy a case, have to open the front panel, potentially remove it, remove dust filters, and the grill to get suitable fpm? It's a simplistic fault that manufacturers continue to make... Go back to the basics, its that simple.

Yea, like, thats the ticket, like, for sure for sure man.....

Buy a new case, then have disassemble 1/3 of it just to get the airflow that should have been engineered in by default, wow what a concept :(

wait for it..
wait for it.....

f. A. i. L....
 
Back
Top