Crunchers Helping Crunchers

[Norton]

Just looked and the one I have is the Alpenfohn Sella. Support for Intel 1156, 1155, 1150, and 775. Also AMD AM2+ and AM3

If that will work for ya brother, you're sure welcome to it man.

PM incoming

 

[Norton]

FYI- I moved your posts to the tech support thread:

https://www.techpowerup.com/forums/...rdware-tech-support-discussion-thread.214610/

 

[Norton]

Selling one of my 3930k setups- a discount is available for TPU crunchers or folders

https://www.techpowerup.com/forums/threads/asus-x79-3930k-combo-fs-mb-cpu-ram-cooler.235771/

 

[Bow]

Parting out my old PC.

https://www.techpowerup.com/forums/threads/pc-part-out-sale.237471/

 

[AlienIsGOD]

By chance any members have an am3 compatible HSF, have a 3rd rig coming together but I need a cpu cooler.

 

[jboydgolfer]

By chance any members have an am3 compatible HSF, have a 3rd rig coming together but I need a cpu cooler.

If u can wait a day or two (i might have a massive coolermaster v8), but id have to get it out of storage . I just need to make sure the AMD hardware for mounting is there

 

[stinger608]

Okay, this is a mess!!!!

Kept getting a ACPI Error Code with the dual processor Supermicro X9DAi system. Did some research and it is common with these and other Supermicro boards with the early bios'

So, checked on the newer bios files and found the latest bios for that board...........All great............Made a bootable USB flash drive, copied the bios, plugged it in and all went great! Success................Right up until I shut the system down, unplugged the power, reset the bios............Which were the instructions according to Supermicro

Turned the system on and it just does an infinite boot cycle. Turns on and runs for about 10 to 15 seconds, then shuts down, and repeats until I shut the power supply off.

Well, after finding this same issue with other users, I find out that the new bios DOES NOT support the damn ES Xeon chips!!!!!!

Nowhere in the bios listing does it state this issue! One of the users had to contact frigging Supermicro to find this information out!

So here is the part where I hopefully can get some help from a fellow member:

Short of buying or building a bios flash unit I need a socket 2011 version 1 NON-ES chip.

Does anyone have one that they could send? There is an older bios file that stops the ACPI error and allows the use of ES processors.

I will gladly pay shipping both ways and if necessary will pay extra for the use.

Thanks in advance

 

[Norton]

@stinger608 will that board support a 3930k? You're welcome to use the chip to do what you need to do.

 

[stinger608]

@stinger608 will that board support a 3930k? You're welcome to use the chip to do what you need to do.

I Don't believe it will support non-Xeon chips but I'll take a look bro!

After looking, it would appear that it only supports Xeon processors @Norton

 

[XZero450]

I can pull one from my setup that's listed in my FS thread. Unless you want the whole thing?

 

[stinger608]

Unless you want the whole thing?

If I could, I would.

 

[stinger608]

Okay, this is a mess!!!!

Kept getting a ACPI Error Code with the dual processor Supermicro X9DAi system. Did some research and it is common with these and other Supermicro boards with the early bios'

So, checked on the newer bios files and found the latest bios for that board...........All great............Made a bootable USB flash drive, copied the bios, plugged it in and all went great! Success................Right up until I shut the system down, unplugged the power, reset the bios............Which were the instructions according to Supermicro

Turned the system on and it just does an infinite boot cycle. Turns on and runs for about 10 to 15 seconds, then shuts down, and repeats until I shut the power supply off.

Well, after finding this same issue with other users, I find out that the new bios DOES NOT support the damn ES Xeon chips!!!!!!

Nowhere in the bios listing does it state this issue! One of the users had to contact frigging Supermicro to find this information out!

So here is the part where I hopefully can get some help from a fellow member:

Short of buying or building a bios flash unit I need a socket 2011 version 1 NON-ES chip.

Does anyone have one that they could send? There is an older bios file that stops the ACPI error and allows the use of ES processors.

I will gladly pay shipping both ways and if necessary will pay extra for the use.

Thanks in advance

Okay, after the amazing help from our own @XZero450 and being soooooooooo kind as to send me a non ES processor, this amazing system is back up and running full steam crunching!

I want to give a very special thanks to @XZero450 for being an amazing member and helping out in a hell of a pinch!!!

 

[jboydgolfer]

Anyone in the wcg/f@h community living in the unites states have need for a massive air cpu cooler, i have this FF to the member who can fit & use it. 180w solution, unused HW is a crime, please help me find it a good loving home

Intel Socket:LGA 1366 / 1156 / 1155 / 1150 / 775 * AMD Socket:FM2+ / FM2 / FM1 / AM3+ / AM3 / AM2+ / AM2 Intel:Core™ i7 Extreme / Core™ i7 / Core™ i5 / Core™ i3 / Core™2 Extreme / Core™2 Quad / Core™2 Duo / Pentium / Celeron AMD:FX-Series / A-Series / Phenom™ II X4 / Phenom™ II X3 / Phenom™ II X2 / Phenom™ X4 / Phenom™ X3 / Athlon™ II X4 / Athlon™ II X3 / Athlon™ II X2 / Athlon™ X2 / Athlon™ / Sempron™

Please shoot me a pm, i dont have notifications enabled. Please pay close attention to the size diagrams as this thing is massive. The mounting hardware for AMD as well as Intel is included

 

[theonedub]

Trying to get my X99 setup up and running but ran into some snags- anyone have a stick of DDR4 I could use to troubleshoot my setup?

 

[manofthem]

Trying to get my X99 setup up and running but ran into some snags- anyone have a stick of DDR4 I could use to troubleshoot my setup?

I may be able to loan you a stick, just need it back when you're done as I'm hanging onto it for a future build. What kind of time frame are you looking at?

 

[Caring1]

Okay, this is a mess!!!!

Kept getting a ACPI Error Code with the dual processor Supermicro X9DAi system. Did some research and it is common with these and other Supermicro boards with the early bios'

Well, after finding this same issue with other users, I find out that the new bios DOES NOT support the damn ES Xeon chips!!!!!!

I should read these threads more often
The cheap Chinese X79 (socket 2011) Motherboards will boot right up with ES XEON processors and seem very stable, although there is no overclocking functions in the BIOS as it is very basic.
But if you want to run a multi socket board you are out of luck as they only support the one CPU.

 

[phill]

Just saw this thread so subscribing for future reference!!

Glad to hear your all sorted out now @stinger608 Getting that pie is proving to be rather difficult at the moment !!

 

[theonedub]

I may be able to loan you a stick, just need it back when you're done as I'm hanging onto it for a future build. What kind of time frame are you looking at?

I may have something sourced, but I'll drop you a PM tonight if it falls through

 

[CrAsHnBuRnXp]

CrAsHnBuRnXp - 2 AMD Athlon 64 3200+ CPU's if someone wants them. Just pay shipping.

that was so long ago!

 

[JrRacinFan]

OK guys I may have to offload some minor items. More older items than anything. think it will end up being stuff from early am3 days. Maybe a hard drive or 2

 

[CrAsHnBuRnXp]

Holy hell! It's @JrRacinFan ! How the hell are you man? Long time no see/talk.

 

[HammerON]

I may have something sourced, but I'll drop you a PM tonight if it falls through

Wish I could help, but I do not have any spare DDR4 sticks currently
Hope you get it worked out!

 

[JrRacinFan]

Holy hell! It's @JrRacinFan ! How the hell are you man? Long time no see/talk.

I'm very well buddy. Tend to only ghost the forums anymore.

 

[theonedub]

Ok so the RAM wasn't the issue. Here's what I need now (brace yourselves), can someone either lend me a 5820K or similar CPU (or ES equivalent) OR lend me a X99 board? I can pay shipping both ways, put up a deposit, etc and I'm a long time member that I'm sure plenty people here would vouch for me. Let me know, thank you!

 

[stinger608]

I'm a long time member that I'm sure plenty people here would vouch for me.

Wouldn't hesitate if I had the parts!!!!!

I'd vouch for theonedub in a heartbeat.