- Joined
- May 14, 2004
- Messages
- 28,605 (3.74/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
Last edited:
-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
Does my ATI card support temperature monitoring?
- Thread starter W1zzard
- Start date
- Joined
- May 14, 2004
- Messages
- 28,605 (3.74/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
the 4th image shows the location of the temp chip on 9800 xt .. thats where the local temp is measured
Thanks for the reply, W1zzard. I was wondering where the thermistor (?) was located though, if it does indeed use one. I guess if so it'd be one of the components close by somewhere.. I'll investigate with the freezer spray sometime.. 
I'm not too confident of the accuracy of that sensor at the moment, so, I might get around to either raising it up on legs to directly contact the heatsink, or maybe solder a small lead there with the component, or alternative sensor, on the end (so I can stick it wherever I want, say, on the upcoming GPU waterblock.
)
Cheers.
I'm not too confident of the accuracy of that sensor at the moment, so, I might get around to either raising it up on legs to directly contact the heatsink, or maybe solder a small lead there with the component, or alternative sensor, on the end (so I can stick it wherever I want, say, on the upcoming GPU waterblock.
)Cheers.
- Joined
- May 14, 2004
- Messages
- 28,605 (3.74/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
the "thermistor" for gpu is inside the core (or under the core on 9800) .. the thermistor for the temp chip is inside the chip .. so no way to do move them
T
thegrayson
Guest
aiw 9800pro supported?
Does atitool support fan and temp monitoring on my sapphire aiw 9800 pro 128mb?
Does atitool support fan and temp monitoring on my sapphire aiw 9800 pro 128mb?
zealot`grr
New Member
- Joined
- Jun 1, 2004
- Messages
- 180 (0.02/day)
- Location
- Dortmund, Germany
thegrayson - try to locate the "LM63" chip 
it might work...
it might work...
M
Mikee
Guest
temp monitoring
what about Hercules Radeon 9700 NonPro. Cause in AtiTool i dont see the temp readings, so i am trying to find out if it is a software issue or just that i dont have the damn termistor on my card ..
what about Hercules Radeon 9700 NonPro. Cause in AtiTool i dont see the temp readings, so i am trying to find out if it is a software issue or just that i dont have the damn termistor on my card ..
- Joined
- May 14, 2004
- Messages
- 28,605 (3.74/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
9700's dont support temp. monitoring
- Joined
- May 14, 2004
- Messages
- 28,605 (3.74/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
most probably not .. if it has the 9600xt layout it might
R
richardhuang37
Guest
Hi , W1zzard :
F75373S is not a Winbond product , it's Fintek's.
F75373S is not a Winbond product , it's Fintek's.
- Joined
- May 14, 2004
- Messages
- 28,605 (3.74/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
do you have any info on the chip? all i could find was a taiwanese website with no english pages .. any contact addresses there?
J
John
Guest
Temperature measurement of ATI 9800SE AIW ?
Hello,
I am a happy owner of an ATI 9800SE AIW from Sapphire and I would like to know if my card support temperature measurement.
I have already try the ATITOOL but no temperature device was detected.
I have then read your article with a lot of interest and find some LM63 device but I can't find the correct foot print on my card.
Thanks by advance for your help.
Hello,
I am a happy owner of an ATI 9800SE AIW from Sapphire and I would like to know if my card support temperature measurement.
I have already try the ATITOOL but no temperature device was detected.
I have then read your article with a lot of interest and find some LM63 device but I can't find the correct foot print on my card.
Thanks by advance for your help.
- Joined
- May 14, 2004
- Messages
- 28,605 (3.74/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
9800se aiw does not support temp. monitoring ..
J
John
Guest
Temperature measurement of ATI 9800SE AIW ?
What's a shame ! I feel a bit stupid with my LM63 in my hands now !
Do you think that there is some solution to connect the LM63 on the board even without the correct foot print? I mean by soldering wires at the correct place ?
If my analyses is good we need to find the 3V3 power supply, the serial bus an the external tests point of the Internal GPU diode.
What do you think about this ?
What's a shame ! I feel a bit stupid with my LM63 in my hands now !
Do you think that there is some solution to connect the LM63 on the board even without the correct foot print? I mean by soldering wires at the correct place ?
If my analyses is good we need to find the 3V3 power supply, the serial bus an the external tests point of the Internal GPU diode.
What do you think about this ?
U
Unregistered
Guest
Hey there! What about Power Color Radeon 9600se (R96LE-C3S)??
Btw: Aren't there any list containing all the models??
Thanks.
Btw: Aren't there any list containing all the models??
Thanks.
U
Unregistered
Guest
Just wondering if anyone knows whether the AIW 9600XT has temperature monitoring. I'd check but I have a vga silencer on my card and I don't feel like taking it off. Thanks.
U
Unregistered
Guest
Sapphire X800 XL
I have the Sapphire X800 XL 256 VIVO AGP, it has an LM63 chip on it... but I can't seem to find out the temperature in any programs. Have tried:
- My old ATI card had it in the Overclock section, no such section on this card.
- Sapphire's RedLine utility seems to have no mention of temp
- ATITool doesn't recognise and temp monitoring.
Any ideas?
I have the Sapphire X800 XL 256 VIVO AGP, it has an LM63 chip on it... but I can't seem to find out the temperature in any programs. Have tried:
- My old ATI card had it in the Overclock section, no such section on this card.
- Sapphire's RedLine utility seems to have no mention of temp
- ATITool doesn't recognise and temp monitoring.
Any ideas?
T
Triscope
Guest
Same here, I just bought an x800XL 256mb agp version and I cant find this god damn temperature reading. Ive looked everywhere. Is it maybe simply dissabled or what?? cause its pissing me off a bit, and id like to know why the pro's and xt's would have it but not the xl....
G
gotti
Guest
me too... have got the sapphire radeon ati x800 xl and can't messure the temperature :-(
- Joined
- Nov 3, 2006
- Messages
- 340 (0.05/day)
- Location
- Jonesbor, AR United States
| Processor | Q6600 G0 SLACR @ 3.76 GHz |
|---|---|
| Motherboard | ASUS Maximus Formula X38 |
| Cooling | D-Tek Fuzion Nozzled |
| Memory | 2x2 GB Geil Esoteria @ DDR2-1129 |
| Video Card(s) | 2 Diamond HD 2900XT 1GB Crossfire 940/075 MCW60 |
| Storage | 2 Western Digital 500 Gb Maxtor 250 Gb |
| Display(s) | Westinghouse LVM-37W3 1080P 37" HDTV |
| Case | Thermaltake Armor Silver w/ 250mm side fan |
| Audio Device(s) | Auzentech Prelude |
| Power Supply | Silverstone DA850 850W |
I own a Sapphire X1300XT 512mb card, so according to this thread I have an LM63 chip (diode?) on my card. Also, I am able to monitor the temp. under the Catalyst Contorl Center. I was wondering why I cannot view the temperature under the ATItool. I am running the beta 16 pre5 build, and it runs perfect! Thanks for this great software BTW Wizzard. Also, are there any low-resource usage temp monitoring software to run in the background while you play a game for OC testing purposes? Thanks for the help guys.