EK Water Blocks EK Supreme

Grings · Apr 14, 2008

Has anyone seen a comparison between a D-Tek with nozzles and the EK?, i remember seeing a test of the fuzion nozzle kit where it got a fair bit more restrictive, but the only comparison i've seen between the two was done using the fuzion WITHOUT nozzles.

Also has anyone heard anything about different plates to fit in the Ek?, i remember seeing (i think in the Overclock.net review) that there were going to be 'performance plates' released for the Supreme, but am not aware of any actually being released.

asb2106 · Apr 14, 2008

Grings said:
Has anyone seen a comparison between a D-Tek with nozzles and the EK?, i remember seeing a test of the fuzion nozzle kit where it got a fair bit more restrictive, but the only comparison i've seen between the two was done using the fuzion WITHOUT nozzles.

Also has anyone heard anything about different plates to fit in the Ek?, i remember seeing (i think in the Overclock.net review) that there were going to be 'performance plates' released for the Supreme, but am not aware of any actually being released.

Thats a great question!! Ive never been one to pay close attention to the nozzles, (I have all Dtek), would there be better flow elsewhere?

intel igent · Apr 14, 2008

Grings said:
Has anyone seen a comparison between a D-Tek with nozzles and the EK?, i remember seeing a test of the fuzion nozzle kit where it got a fair bit more restrictive, but the only comparison i've seen between the two was done using the fuzion WITHOUT nozzles.

Also has anyone heard anything about different plates to fit in the Ek?, i remember seeing (i think in the Overclock.net review) that there were going to be 'performance plates' released for the Supreme, but am not aware of any actually being released.

no news on plates yet for the EK.

martinM210 is suggesting the possibility of further improving the EK's performance by chamferring the leading edges of the accelerator plate (to reduce entry losses)

IIRC EK beats out fuzion with nozzles + washer i beleive there was a direct comparo @ Xs

:toast:

t_ski · Apr 15, 2008

asb2106 said:
Thanks! That was the intention.

So Im doing some diggin on sidewindercomputers right now, and Im thinkin a 655 pump, a GTX 480 rad, and the EK Supereme. Is this block the same one as in this review???

asb, I highly recommend you pick up the steel backplate for the EK when you purchase it.

The pressure plates are just coming out, not sure of the official release yet.

t_ski · Apr 17, 2008

For all of those asking how the EK Supreme compares to the D-Tek Fuzion, MadShrimps just posted this:

http://www.madshrimps.be/?action=getarticle&number=1&artpage=3354&articID=810

Their tests show the EK beating the Fuzion by about 2 degrees. At the same time, it beat all other blocks in the group.

jbunch07 · Apr 17, 2008

t_ski said:
For all of those asking how the EK Supreme compares to the D-Tek Fuzion, MadShrimps just posted this:

http://www.madshrimps.be/?action=getarticle&number=1&artpage=3354&articID=810

Their tests show the EK beating the Fuzion by about 2 degrees. At the same time, it beat all other blocks in the group.

sold!

t_ski · Apr 17, 2008

jbunch07 said:
sold!

I think your image link isn't working

BTW, they said their block was totally flat, while the sample I received had a distinct bow in it.

jbunch07 · Apr 17, 2008

t_ski said:
I think your image link isn't working

BTW, they said their block was totally flat, while the sample I received had a distinct bow in it.

not working...i can see it just fine :confused:

bow? thats not good how bad was it?

t_ski · Apr 17, 2008

For me, I see an image that says "though shall not steal" lol

Actually, the bow was similar to the Swiftech GTX where everyone used a thicker o-ring to bow the base. The idea was that it adds more pressure to the center of the CPU and provides better contact. Read the review again - the "Closer Look" page has a picture of it.

jbunch07 · Apr 17, 2008

t_ski said:
For me, I see an image that says "though shall not steal" lol

Actually, the bow was similar to the Swiftech GTX where everyone used a thicker o-ring to bow the base. The idea was that it adds more pressure to the center of the CPU and provides better contact. Read the review again - the "Closer Look" page has a picture of it.

wow thats weird :laugh:

ok ill go take a look at it

edit: hmmm i see the pic you were talking about lol thats funny!

Urlyin · Apr 17, 2008

great pic T_ski ... nicely done :toast:

jbunch07 · Apr 17, 2008

for just $70 bucks this awesome...i will be getting this once i get my swiftech kit, then ill sell the wb that comes with it

Wetbehindtheears · Apr 17, 2008

Thanks for this. I was going to get a D-Tek @ end of month with nozzle kit but I think I will stick to my original choice of EK :toast:

Processor	R7 5800x3D
Motherboard	MSI x570 Tomahawk
Cooling	XSPC Raystorm Edge,EK QS P420M,EK D5pwm Revo Res
Memory	32gb Corsair Vengeance RT 3600 cl16
Video Card(s)	Zotac 3070ti Amp Extreme
Storage	Samsung 980pro 1tb x2
Display(s)	MSI MPG321QRF QD
Case	Corsair 7000D
Power Supply	EVGA 1000 P2
Mouse	G900
Keyboard	Corsair k60 RGB PRO
Software	Win 11

System Name	File Server
Processor	2600k
Motherboard	idk
Cooling	H110
Memory	20gb of something
Video Card(s)	onboard!
Storage	2x120 SSD, (5x8tb)+(3x4tb) = 35 TB Z1 pool
Display(s)	couple 4k 32s
Case	cooler master something i think
Audio Device(s)	does anyone bother with anything but onboard?
Power Supply	Whatever OCZ PC Powercooling became. 1200 modular setup
Mouse	MX Master 2x
Keyboard	G710
Software	FreeNAS

System Name	old school / new school
Processor	3.0e C0 @ 3.6 / e5200
Motherboard	p4p800e-dlx / p5q-DLX
Cooling	custom water see sig / air
Memory	2x1g oczPC4000EbPl / 2x2g ocz2rpr1066
Video Card(s)	3850AGP / 4890vaporX
Storage	36g raptor+120g wd / wd 1001fals 1tb
Display(s)	BenQ / sharpAQUOS LC-37D64U
Case	modded antec plusview / generic
Audio Device(s)	audigy 2zs / ASUS Xonar HDAV1.3
Power Supply	fan/cable modded powerstream 520 / OCZ 700mxsp
Software	Xp pro SP2 / VISTA ultimate OEM

System Name	My i7 Beast
Processor	Intel Core i7 6800K
Motherboard	Asus X99-A II
Cooling	Nickel-plated EK Supremacy EVO, D5 with XSPC Bayres & BIX Quad Radiator
Memory	4 x 8GB EVGA SuperSC DDR4-3200
Video Card(s)	EVGA 1080 SuperClocked
Storage	Samsung 950 Pro 256GB m.2 SSD + 480GB Sandisk storage SSD
Display(s)	Three Asus 24" VW246H LCD's
Case	Silverstone TJ07
Audio Device(s)	Onboard
Power Supply	Corsair AX1200
Keyboard	Corsair K95
Software	Windows 10 x64 Pro

System Name	My i7 Beast
Processor	Intel Core i7 6800K
Motherboard	Asus X99-A II
Cooling	Nickel-plated EK Supremacy EVO, D5 with XSPC Bayres & BIX Quad Radiator
Memory	4 x 8GB EVGA SuperSC DDR4-3200
Video Card(s)	EVGA 1080 SuperClocked
Storage	Samsung 950 Pro 256GB m.2 SSD + 480GB Sandisk storage SSD
Display(s)	Three Asus 24" VW246H LCD's
Case	Silverstone TJ07
Audio Device(s)	Onboard
Power Supply	Corsair AX1200
Keyboard	Corsair K95
Software	Windows 10 x64 Pro

EK Water Blocks EK Supreme

Grings

asb2106

intel igent

New Member

t_ski

Former Staff

t_ski

Former Staff

jbunch07

New Member

t_ski

Former Staff

Attachments

jbunch07

New Member

t_ski

Former Staff

jbunch07

New Member

Urlyin

I still do pencil mods

jbunch07

New Member

Wetbehindtheears

New Member

Processor	i5-2500k
Motherboard	ASRock z68 pro3-m
Cooling	Corsair A70
Memory	Kingston HyperX 8GB 2 x 4GB 1600mhz
Storage	OCZ Agility3 60GB(boot) 2x320GB Raid0(storage)
Display(s)	Samsung 24" 1920x1200
Case	Custom
Power Supply	PC Power and Cooling 750w
Software	Win 7 x64

System Name	Still ongoing
Processor	i7 920 D0 @ 4.2GHz
Motherboard	Gigabyte EX58-UD5
Cooling	CoolerMaster V8 @ present
Memory	6Gb Crucial DDR3 PC3-8500 CL7
Video Card(s)	2xXFX 5770 in Crossfire
Storage	4x1Tb Sata
Display(s)	2407WFP
Case	Modded Lian Li PC G70
Audio Device(s)	Onboard
Power Supply	Antec Quattro 1000
Software	Win 7 x86 and x64
Benchmark Scores	SuperPi 1M - 8.83s Fastest - 4.66GHz on Air!