GPU-Z v0.1.1 ONLY - BUGS ONLY

[lemonadesoda]

Usual debugging thread. Screenies please, if you think they are helpful, or LINK to your previous post, if the SAME bug exists that you reported last time.

Tip for people taking screenshots:

Rather than pressing "printscreen" and cropping your picture, press "ALT+Printscreen" to capture only the ACTIVE window. It will save you a lot of time.

 

[cool_recep]

not v0.1.0 but v0.1.1

 

[kwchang007]

Hmmm hate to double post but I put up a thread where v0.1.1 caused my backlight on the lcd to turn off.

 

[PVTCaboose1337]

The shaders...

 

[lemonadesoda]

My understanding is that there are 4 (not 6) vertex shaders, but 6 parallel geometry engines on the X3-256.

(NOTE that I have mod'ed my X3 to 16 pipes from stock 12)

Useful source data:
http://ati.amd.com/products/fireglx3-256/ATI_FireGL_X3-256.pdf
http://ati.amd.com/products/workstation/fireglmatrix3.html
http://ati.amd.com/products/fireglx3-256/index.html

 

[lemonadesoda]

Tip for people taking screenshots (of just ONE window):

Rather than pressing "printscreen" and cropping your picture, press "ALT+Printscreen" to capture only the ACTIVE window.

 

[DarkjeThe2nd]

-oc matches rt-sliders, not actual clocks as displayed by rt-monitor and everest.
-while validating the validation upload bar shows Chinese characters
-dump option displays about dialog
-fillrates and bandwidth calculations are 'optimistic', ie. a G seems to be 1000M instead of 1024M, like it was a harddisk or marketingtalk?
-it looks for updates even when disabled...

edit: no... my bad... updating issue is fixed in 0.11
edit again: it seems the updating issue is still there but I only get it in Vistax86 and not XP...

 

[feanor1024]

It's still broken on Vista x64 with Forceware 169.01 or greater.

 

[cdawall]

its so close w1z but its tech should be 90nm and the corresponding etc.


oh and it shut off my LCD backlight to?

 

[revin]

Still don't I.D. my Rev.3 7800GS Bliss+ correctly, EXCEPT,that it is seen as a G71 now
Just the 5 item's in red that are not reading correct yet.
Fantastic job
--------[ GPU ]---------------------------------------------------------------------------------------------------------

[ AGP 8x: Gainward GeForce 7800 GS AGP ]

Graphics Processor Properties:
Video Adapter Gainward GeForce 7800 GS AGP
BIOS Version 5.71.22.12.03
GPU Code Name G71GSAGP
PCI Device 10DE-00F5 / 10B0-0801
Transistors 278 million
Process Technology 90 nm
Die Size 196 mm2Bus Type AGP 8x @ 8x
Memory Size 512 MB
GPU Clock (Geometric Domain) 501 MHz (original: 500 MHz)
GPU Clock (Shader Domain) 501 MHz (original: 500 MHz)
GPU Clock (ROP Domain) 501 MHz (original: 500 MHz)
RAMDAC Clock 400 MHz
Pixel Pipelines 20
TMU Per Pipeline 1
Vertex Shaders 7 (v3.0)
Pixel Shaders 20 (v3.0)
DirectX Hardware Support DirectX v9.0c
Pixel Fillrate 10020 MPixel/s
Texel Fillrate 10020 MTexel/s

Memory Bus Properties:
Bus Type GDDR3
Bus Width 256-bit
Real Clock 702 MHz (DDR) (original: 700 MHz)
Effective Clock 1404 MHz
Bandwidth 43.9 GB/s

nVIDIA ForceWare Clocks:
Standard 2D GPU: 450 MHz, Memory: 702 MHz
Low-Power 3D GPU: 500 MHz, Memory: 702 MHz
Performance 3D GPU: 501 MHz, Memory: 702 MHz

 

[Black Light]

crashes my video on my X1650PRO

 

[alom]

All version of GUP-Z can't work with my NVIDIA Quadro NVS 280 (PCI-E) in WINXP SP2

 

[Teccxpert]

v0.1.1 locks up on my 32bit Vista Ultimate, even task manager can't be enabled...

 

[Leonardo]

Issues

Hello.

My observations with GPU-Z v0.1.1:

1. The BIOS version is not displayed. Don't know if that is an issue with the card, with the drivers or with GPU-Z. In addition, I cannot validate the correctness of the other fields since I don't know the specs of my card that well.

2. The size of the "Subvendor" field is too small, I cannot read the whole string value.

3. If I access the card selection drop-down at the bottom of the window and re-select the active card (my only graphics card), GPU-Z crashes. The standard Windows crash report utility is activated. I click "OK" and Windows tries to upload the crash log... Windows freezes. I have to hit power button and reboot the machine.


EDIT: Uploaded data: http://www.techpowerup.com/gpuz/u2944/

 

[wiak]

RV680 3870 clock bug/misreading
looks more like that powerplay clock in windows, GPU-Z should use high preformace mode if its possible so powerplay will go to overclock speed

 

[W1zzard]

yep that'll be fixed in next release, also added the "email me my id" feature you requested

 

[wiak]

yep that'll be fixed in next release, also added the "email me my id" feature you requested

nice, meybe a find my ids (email) search fieled on techpowerup.com/gpuz
real easy and fast way to get to you submited ids and a little overview of you max mem and clock speed, and a list that rank best oc on top, date etc, and links to you ids

there is also a huge bug in GPU-Z Project Search, you cant change pages, its stuck on page 1
http://www.techpowerup.com/gpuz/search.php

there is also a small bug with the ati radeon logo, its old, here is the new one
http://www.amd.com/us-en/Corporate/VirtualPressRoom/0,,51_104_590_15081,00.html

and meybe add Crossfire X when there is two RV670s and RD790/RD780 in the system?
http://www.amd.com/us-en/Corporate/VirtualPressRoom/0,,51_104_590_15374,00.html

 

[W1zzard]

we do not force a registration, so everybody can pick any name, this means that you cant have "your" projects reliably identified

 

[wiak]

my email? ^^
meybe

 

[cdawall]

when i got through the search if i hit next page the search resets

 

[pik_d]

Hmmm hate to double post but I put up a thread where v0.1.1 caused my backlight on the lcd to turn off.

You might want to tell him what card, and other system info.

crashes my video on my X1650PRO

Are you sure isn't not just turning off your backlight? I thought this was happening too, but when I looked more carefully, it was just turning off the backlight.


It turns off my backlight on a Dell E1505, Core 2 Duo T5500, Windows XP pro, and a mobile X1400.

 

[war59312]

Die Size, BIOS Version, Memory Size, and Default Clock all are screwed up...

 

[W1zzard]

anyone who has the backlight issue, please contact me on instant messenger

 

[W1zzard]

Die Size, BIOS Version, Memory Size, and Default Clock all are screwed up...

do you know the correct numbers? bios reading (= default clocks) isnt implemented yet for pre-geforce fx cards

 

[Punisher!]

I confirm random SYSTEM HARD FREEZEs when you try to open GPU-Z with other CPU-Zs opened

DFI Ultra-D (NF4)
Toledo 4200X2
8800GTX
XP SP2

Please fix it, really annoying!