• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

HIS Also Launches A Pair of Radeon HD 7950 IceQ Series Graphics Cards

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
47,675 (7.43/day)
Location
Dublin, Ireland
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard Gigabyte B550 AORUS Elite V2
Cooling DeepCool Gammax L240 V2
Memory 2x 16GB DDR4-3200
Video Card(s) Galax RTX 4070 Ti EX
Storage Samsung 990 1TB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
Apart from launching a pair of Radeon HD 7970 graphics cards based on its IceQ X² cooler, HIS also launched a pair of graphics cards based on the Radeon HD 7950 GPU, which are cooled by its latest IceQ iTurbo cooler. This cooler was also featured on HIS HD 7870 IceQ iTurbo. Based on this cooler, HIS launched two models, the HIS HD 7950 IceQ (model: H795Q3G2M), and HIS HD 7950 IceQ Turbo (model: H795QT3G2M). The base model features reference clock speeds of 800 MHz (core), 5.00 GHz (memory); while the Turbo model features a slightly bumped core clock speed of 900 MHz, with no change in memory speed.

Both cards use new HIS IceQ iTurbo cooling solution, which consists of a lateral-airflow design. From the GPU base, two 6 mm-thick and two 8 mm-thick nickel-plated copper heat-pipes arise, conveying heat to a small but dense aluminum channel array. A lateral-flow blower directs air through these channels, where heat dissipation takes place. Unfortunately, with the way this cooling solution is designed, you require three expansion slot bays in you chassis you accommodate one of these cards (check out the top-view picture). The cards use AMD reference-design PCBs that are colored blue, to match HIS IceQ color-scheme. HIS did not give out pricing information.



View at TechPowerUp Main Site
 
Wow that's actually a pretty cool looking design (no pun intended)
 
that 'blower' fan looks unique.. doesnt it cover the PCB area immediately below it, there s a gap below it... also, the raised fan shroud might take up more than 2 slots - 2.5?
 
If blowers are so noisy and bad at moving air why not just use a shallow normal fan at a 25 degree angle? Or a just put a slope under it. It's all boxed in anyways so the air will get where it needs to go.
 
I find this fugly
 
Why it's the plastic casing so big when the fan is so small? toysh design.
 
Finally, they got rid of that hideous clear plastic housing. I might actually take them seriously now.
 
I have a 4670 HIS that used to be mine for overclocked gaming works great in my parents HTPC now. what 3 years now... Its had a hard life and still going...
 
looks good to me actually, i dont see why people here are bitchin and moanin about it.
 
Back
Top