intel 1700 with high speed ram,memory

[gasolin]

My specs are up to date Please check my specs

 

[iameatingjam]

Oh I see my mistake, that overkill cooler explains it.

 

[biffzinker]

With four 16 GB sticks a mix of old and new Micron ICs I can get 5866 34-42-42-76 1.25v. Taking out the older sticks, and leaving the 5600 sticks easily go to 6600 without touching the stock 1.1v.

Something about the four sticks installed improves bandwidth efficiency, and it gets close to 93,644 GB/s unlike with two sticks. It’s not exactly 5866 when you look at the clock speed because of spread spectrum always enabled.

 

[gasolin]

I want to go higher 4000mhz cl 18 or 4400mhz cl 19 anything better,faster would be to expensive

Now my specs are up to date

 

[biffzinker]

I want to go higher 4000mhz cl 18 or 4400mhz cl 19 anything better,faster would be to expensive

That depends on the board, and the IMC.

 

[gasolin]

cl 16 at these speeds are just to expensive

 

[iameatingjam]

What are you trying to achieve? Is this just an experiment? For its own sake or something? Cause you're not going to gain much in real life performance. I'm not saying don't do it... I know chasing numbers can be fun. Just making sure you know not much is going to change outside of benchmarks, unless you are specifically doing some memory intensive work, and even then its not a certainty. You are getting pretty far past diminishing returns with ddr4.

3600mhz cl 16 is more than enough. DDR5 would make a difference, but not worth getting a new mobo for imo.

 

[ShrimpBrime]

cl 16 at these speeds are just to expensive

Just go for the 4400mhz RAM and be done with the search.

 

[Konomi]

Are you manually tuning or just simply setting XMP? If you're just setting XMP, there's no need to venture outside of the sweet spot for your platform as that'll give you the best cost, performance and least amount of headaches.

 

[gasolin]

I don't manually tune