• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Kingston Teases "Grandview," its Upcoming Mid-range PCIe 4.0 M.2 SSD, and Current-Gen "Seccos"

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
47,669 (7.43/day)
Location
Dublin, Ireland
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard Gigabyte B550 AORUS Elite V2
Cooling DeepCool Gammax L240 V2
Memory 2x 16GB DDR4-3200
Video Card(s) Galax RTX 4070 Ti EX
Storage Samsung 990 1TB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
Kingston at the 2020 International CES shows us their upcoming mid-range M.2 NVMe SSD that has the latest PCI-Express 4.0 x4 host interface and NVMe 1.4 protocol, codenamed "Grandview." Later this year, this drive will be launched as a high cost-performance product under the company's marquee or HyperX brand. Available in capacities ranging between 500 GB and 2 TB, the drive is powered by Marvell "Whistler Plus" 12 nm controller that has 4 flash channels, and 1.2 GT/s per channel bandwidth. They wouldn't tell us if it's TLC or QLC NAND flash in use, or the manufacturer-rated performance numbers. The PCIe to M.2 adapter in these pictures will not be part of the package.

Also on display was "Seccos," their new PCI-Express 3.0 x4 drive that uses an unnamed 8-channel controller (likely Marvell), and 3D TLC NAND flash, with capacities ranging between 250 GB to 2 TB. Kingston put out some CDM numbers for the 1 TB model of Seccos: 3,449 MB/s sequential reads, and 2,839 MB/s sequential writes. The manufacturer-rates performance numbers are up to 3,500 MB/s reads, and up to 3,000 MB/s writes.



View at TechPowerUp Main Site
 
Just to be clear, these are NOT nvme.
 
totally blind, did you add the NVME in the article? :rolleyes:
Yes, as a clarification, because it's understood that every PCIe SSD these days uses NVMe.
 
Yes, as a clarification, because it's understood that every PCIe these days uses NVMe.
but...
I dont understand....

I need coffee.
 
but...
I dont understand....I need coffee.

"WITH ENUFF COFFEE, ANYTHING IS POSSIBLE" hehehe ...:laugh:...:D...:eek:

Also, without NVME, a pcie drive could not realistically attain a ~3500-3000MB/s speed rating, yes ?
 
but...
I dont understand....

I need coffee.
this thing is pushing well north of 600MB/s read and write speeds, that means, quite clearly, that this is not a SATA SSD. And nobody gives a hoot about U.2 drives anymore. The drive is a M.2 drive, which means it is either NVMe or SATA, and clearly based on speeds (and the title) this isnt a SATA drive.

Deductive reasoning watson.
 
it's possible to hook a sata ssd to the controller.
you have to plug the sata cable and power.
 
this thing is pushing well north of 600MB/s read and write speeds, that means, quite clearly, that this is not a SATA SSD. And nobody gives a hoot about U.2 drives anymore. The drive is a M.2 drive, which means it is either NVMe or SATA, and clearly based on speeds (and the title) this isnt a SATA drive.

Deductive reasoning watson.

A PCI-e drive does not need to be NVMe. Just look at the Samsung XP941 it’s a ACHI drive capable of 1000 MB sequential speeds.
 
Back
Top