• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Meltdown and Spectre Patched BIOS for X58 Motherboards

Regeneration

NGOHQ.COM
Joined
Oct 26, 2005
Messages
3,122 (0.45/day)
Guess they had a change of heart.

106A4 = i7 9xx series and Xeons steppings C0/C1/B0 are VULNERABLE
106A5 = i7 9xx series and Xeons steppings D0/B1 should be PROTECTED
206C2 = Hexacore i7 series and Xeons should be PROTECTED
206E6/206F2 = Socket 1567 Xeons should be PROTECTED


If you get any other result, try to power cycle the system, re-flash, play around with the OS, check for updates, etc.
 
Last edited:
Joined
Jul 30, 2018
Messages
3 (0.00/day)
System Name Yesterday
Processor Intel i7 920 D0
Motherboard Gigabyte X58A-UD3R rev 2.0
Cooling Corsair H45
Memory Corsair Dominator 2GBx3 @1600
Video Card(s) MSI GTX 660 Ti OC 2GB
Storage Samsung 840 Evo 120GB
Display(s) Dell U2410
Case CaseLabs Magnum TH10B
Audio Device(s) X-Fi Xtreme Music 0460
Power Supply Corsair HX850W
Mouse Logitech G500 / Logitech G602 + SteelSeries QcK Mass
Keyboard Ducky Zero Blue Switch
Software Windows 10 Pro 1803 x64
Joined
Jul 24, 2018
Messages
33 (0.01/day)
Guess they had a change of heart.

106A4 = i7 9xx series and Xeons steppings C0/C1/B0 are VULNERABLE
106A5 = i7 9xx series and Xeons steppings D0/B1 should be PROTECTED
206C2 = Hexacore i7 series and Xeons should be PROTECTED
206E6/206F2 = Socket 1567 Xeons should be PROTECTED


If you get any other result, try to power cycle the system, re-flash, play around with the OS, check for updates, etc.

Interesting..

Yeah, in my case it's possible that InSpectre was reading some kind of cached result or something, not really sure.

----

P6T Deluxe V2 successfully patched without issue. Also, I ran into the same issue with InSpectre caching the analysis. I also didn't lose my bios settings after flashing.

Quick Cinebench R15 comparison:
x5670 @ 4.4ghz (200x22, 1.325v) DDR3 @ 2000mhz

Best result of ten runs:
Before: 1000cb
After: 1000cb

Cinebench doesn't seem to be affected by the updates.
 
Last edited:

Regeneration

NGOHQ.COM
Joined
Oct 26, 2005
Messages
3,122 (0.45/day)
I'm updating all ROMs with a more recent microcode for 106A4. It is still vulnerable to Spectre, but newer (2015) than the one used by the vendor (2009).
 
Joined
Aug 20, 2007
Messages
21,419 (3.41/day)
System Name Pioneer
Processor Ryzen R9 9950X
Motherboard GIGABYTE Aorus Elite X670 AX
Cooling Noctua NH-D15 + A whole lotta Sunon and Corsair Maglev blower fans...
Memory 64GB (4x 16GB) G.Skill Flare X5 @ DDR5-6000 CL30
Video Card(s) XFX RX 7900 XTX Speedster Merc 310
Storage Intel 905p Optane 960GB boot, +2x Crucial P5 Plus 2TB PCIe 4.0 NVMe SSDs
Display(s) 55" LG 55" B9 OLED 4K Display
Case Thermaltake Core X31
Audio Device(s) TOSLINK->Schiit Modi MB->Asgard 2 DAC Amp->AKG Pro K712 Headphones or HDMI->B9 OLED
Power Supply FSP Hydro Ti Pro 850W
Mouse Logitech G305 Lightspeed Wireless
Keyboard WASD Code v3 with Cherry Green keyswitches + PBT DS keycaps
Software Gentoo Linux x64 / Windows 11 Enterprise IoT 2024

Solaris17

Super Dainty Moderator
Staff member
Joined
Aug 16, 2005
Messages
26,860 (3.82/day)
Location
Alabama
System Name RogueOne
Processor Xeon W9-3495x
Motherboard ASUS w790E Sage SE
Cooling SilverStone XE360-4677
Memory 128gb Gskill Zeta R5 DDR5 RDIMMs
Video Card(s) MSI SUPRIM Liquid X 4090
Storage 1x 2TB WD SN850X | 2x 8TB GAMMIX S70
Display(s) 49" Philips Evnia OLED (49M2C8900)
Case Thermaltake Core P3 Pro Snow
Audio Device(s) Moondrop S8's on schitt Gunnr
Power Supply Seasonic Prime TX-1600
Mouse Lamzu Atlantis mini (White)
Keyboard Monsgeek M3 Lavender, Moondrop Luna lights
VR HMD Quest 3
Software Windows 11 Pro Workstation
Benchmark Scores I dont have time for that.
Cool project, keep up the good work @Regeneration like @R-T-B said earlier, some community service is pretty thankless but your doing great so far (and secretly its kind of fun isnt it ;) )
 
Joined
Jun 3, 2018
Messages
20 (0.01/day)
Editted: wrong MB model....

Thanks Regeneration , been watching the Thread and am wondering if your Gigabyte GA-X58A-UDR3 V2 has the updated Intel Rom similar to Tweaktown's FH Mod2 of several years ago?

I have been using it for sometime, with no issues, FH Mod 2 with the updated Intel ROM (with trim) and other modules so perhaps that would be a better one? not sure if you are doing other Mods or just the MC update but I am using a Raid0 Array and I am not sure if a different Intel RAID rom would be a good idea so thought I'd better ask 1st.

https://forums.tweaktown.com/gigabyte/48085-gigabyte-modified-bios.html about 1/2 way down the page , bottom of the 4th section....

Direct file link : http://www.mediafire.com/download/hn5g8jyvhvj1san/x58aud3r_mod2_fh.zip

thanks for looking into it....

KB
 
Last edited:

Regeneration

NGOHQ.COM
Joined
Oct 26, 2005
Messages
3,122 (0.45/day)
I skipped updating the Intel RAID module as it can corrupt the array and I don't want to be blamed for it.
 
Joined
Jun 3, 2018
Messages
20 (0.01/day)
I skipped updating the Intel RAID module as it can corrupt the array and I don't want to be blamed for it.

Okay thanks for an answer I guess I had better not use your Modded Bios's then as I an not sure what Raid Bios FH had but I think it was a 10 series without Trim enabled.

KB.
 

Regeneration

NGOHQ.COM
Joined
Oct 26, 2005
Messages
3,122 (0.45/day)
Or even better, don't use RAID0, it doesn't worth the risk.

I've had enough RAID0 array failures in my lifetime to learn not to use it ever again.

Last time occurred 8 years ago on DX58SO, I remember whining about it to anyone I know of, including @W1zzard.
 
Last edited:
Joined
Jun 3, 2018
Messages
20 (0.01/day)
Or even better, don't use RAID0, it doesn't worth the risk.

I've had enough RAID0 array failures in my lifetime to learn not to use it ever again.

Last time occurred 8 years ago on DX58SO, I remember whining about it to anyone I know of, including @W1zzard.


You are right of course ....I have been very lucky but these WD Black drives just keep on ticking.... RAID was only ever for the performance but these days it doesn't really matter having gone to SSD for the OS etc. I should break the Raid and just run them as separate HDDs nowadays since they are used for storage only anyway.

KB.
 
Last edited:
Joined
Dec 26, 2009
Messages
46 (0.01/day)
I have an EVGA e767 x58 board with a Xeon x5675 -- besides the vulnerability protection, are there other benefits to using updated microcode? Any downsides?
 
Joined
Jul 31, 2018
Messages
5 (0.00/day)
Raid 1 or Raid 10 are the only raid levels worth it. Raid 0 is fine for ssd but not drives, Raid 5 or 6 are hellish nightmares.

Raid 10 is by far the best, being resilient to 2 drive losses and giving the increased speed of Raid 0, its the only one I would use anymore.
 
Joined
Oct 26, 2010
Messages
1 (0.00/day)
Location
San Antonio, TX
Processor Phenom II 965 BE @ 3.8Ghz
Motherboard MSI 790FX GD70
Cooling Scythe Mugen 2
Memory 2x2GB OCZ Reaper DDR3 1333 CL6
Video Card(s) Sapphire Vapor X HD4890
Storage OCZ Vertex SSD, WD 150GB VRaptor, WD 640GB Cav. Black
Display(s) Acer 22"
Power Supply Mad Dog 600W X-Connect
Software Windows 7 Ultimate
Thanks a lot for updating and uploading these Regeneration. I would like to update my wifes MSI Big Bang as she has the latest bios from MSI but it seems compatibility for X5687 is wonky as it doesnt read SPD on a lot of memory with that chip installed. Also doesnt allos uncore adjustment but with i7 975 installed it does.
Is X5687 supported with latest microcode update in this BIOS?
 

Regeneration

NGOHQ.COM
Joined
Oct 26, 2005
Messages
3,122 (0.45/day)
Thanks a lot for updating and uploading these Regeneration. I would like to update my wifes MSI Big Bang as she has the latest bios from MSI but it seems compatibility for X5687 is wonky as it doesnt read SPD on a lot of memory with that chip installed. Also doesnt allos uncore adjustment but with i7 975 installed it does.
Is X5687 supported with latest microcode update in this BIOS?

Yes, but not sure if the uncore adjustment is fixed.
 
Joined
Dec 6, 2005
Messages
10,885 (1.57/day)
Location
Manchester, NH
System Name Senile
Processor I7-4790K@4.8 GHz 24/7
Motherboard MSI Z97-G45 Gaming
Cooling Be Quiet Pure Rock Air
Memory 16GB 4x4 G.Skill CAS9 2133 Sniper
Video Card(s) GIGABYTE Vega 64
Storage Samsung EVO 500GB / 8 Different WDs / QNAP TS-253 8GB NAS with 2x10Tb WD Blue
Display(s) 34" LG 34CB88-P 21:9 Curved UltraWide QHD (3440*1440) *FREE_SYNC*
Case Rosewill
Audio Device(s) Onboard + HD HDMI
Power Supply Corsair HX750
Mouse Logitech G5
Keyboard Corsair Strafe RGB & G610 Orion Red
Software Win 10
Question... I have an Asus P6X58-E and EVGA x58 SLI, both running Ubuntu desktop for WCG crunching. No critical data on either system, they are just workhorses for WCG. An X5670 in each.

What do I have to worry about if I don't patch?
 

dorsetknob

"YOUR RMA REQUEST IS CON-REFUSED"
Joined
Mar 17, 2005
Messages
9,106 (1.27/day)
Location
Dorset where else eh? >>> Thats ENGLAND<<<
What do I have to worry about if I don't patch?
You get pwnd your wife and 6 daughters get kidnapped and sold to a Nigerian 419 Prince apart from that not alot for the average user ( and seeing as they get used for)
both running Ubuntu desktop for WCG crunching.
 
Joined
Dec 6, 2005
Messages
10,885 (1.57/day)
Location
Manchester, NH
System Name Senile
Processor I7-4790K@4.8 GHz 24/7
Motherboard MSI Z97-G45 Gaming
Cooling Be Quiet Pure Rock Air
Memory 16GB 4x4 G.Skill CAS9 2133 Sniper
Video Card(s) GIGABYTE Vega 64
Storage Samsung EVO 500GB / 8 Different WDs / QNAP TS-253 8GB NAS with 2x10Tb WD Blue
Display(s) 34" LG 34CB88-P 21:9 Curved UltraWide QHD (3440*1440) *FREE_SYNC*
Case Rosewill
Audio Device(s) Onboard + HD HDMI
Power Supply Corsair HX750
Mouse Logitech G5
Keyboard Corsair Strafe RGB & G610 Orion Red
Software Win 10
You get pwnd your wife and 6 daughters get kidnapped and sold to a Nigerian 419 Prince apart from that not alot for the average user ( and seeing as they get used for)

Other than the Nigerian prince I've been sharing account details with, nothing to be concerned with? *

* I don't have any daughters (that I know of)
 

Regeneration

NGOHQ.COM
Joined
Oct 26, 2005
Messages
3,122 (0.45/day)
I heard the Chinese are looking to steal Steam accounts to cheat in PUBG and to prove to the world that China is number 1.
 

Regeneration

NGOHQ.COM
Joined
Oct 26, 2005
Messages
3,122 (0.45/day)
Updated all ROMs with TRIM support for SSDs in RAID0.

I can't test 85 motherboards, so if something goes wrong during POST, just reset the CMOS, disable RAID from the BIOS, and let me know.
 
Last edited:
Joined
Jun 3, 2018
Messages
20 (0.01/day)
Thanks R.

Does this mean you think I could now try this modded Bios for my Gigabyte GA-X58A-UDR3 V2 ? did you happen to look at the TT Mod 2 bios to see what they did ?

I have found with mine that 12.9.4.1000 work well too in Win10
 

Regeneration

NGOHQ.COM
Joined
Oct 26, 2005
Messages
3,122 (0.45/day)
Thanks R.

Does this mean you think I could now try this modded Bios for my Gigabyte GA-X58A-UDR3 V2 ? did you happen to look at the TT Mod 2 bios to see what they did ?

I have found with mine that 12.9.4.1000 work well too in Win10

Yes. They just updated the option ROMs for the on-board controllers (LAN, SATA, RAID), which isn't a wise thing to do since some versions are designed for specific chip stepping (e.g. Jmicron).
 
Joined
Jun 3, 2018
Messages
20 (0.01/day)
Oh ok , I thought you may have updated the RAID ORoms too and this would be safe for my Array but I guess I had better not , at least not till I break the Raid Array.

Thanks.
 
Top