Need help wiring power push momentary switch

[Taly.21@live.com]

well, lets see what i can come up with ms paint


yep, solid state type.

basically, relay is just an electrically controlled switch. apply a voltage and the switch will close / open.
there are 2 type of contact on relay, a NO (normally open) means a contact that are open in un-powered/de-energized state and will close when you energized the relay; and a NC (normally close) which is the opposite.

i'll come back with schematic drawing.

EDIT:
here's the schematic, well, sort of

http://www.techpowerup.com/forums/attachment.php?attachmentid=52103&stc=1&d=1375933445

Seems really simple, I'll try it out. Thank you.

 

[bencrutz]

Seems really simple, I'll try it out. Thank you.

just a small addition, make sure you pull the + from the battery through a fuse, just to prevent fire hazard in case of short circuit occur

PS: i miss labeled one of the lamp, it should be dome light, not doom light, doh