hello there, soon enough my brother and i will be buying new systems but we keep checking in deep info about all the parts to be certain that what we getting is good enough and 100% compatibility as much as possible.
this is the motherboard we have our eye on, but we trying to match it with the right ram.
i was looking at information, reading around and apparently its best to get ram with hynix chip instead of samsung, micron (which apparently seem to avoid for some reason)
but i noticed theres 3 variants of hynix: hynix, hynix A-die and hynix M-die.
according to what ive been reading A-die is the way to go if you intend to OC which i dont intent to do this manually, my obj is to set the profile that comes with the ram and that would be the end of it.
M is the second best, but im unsure about the just "hynix" version in this scenario.
with this being said we intend to pair the motherboard and rams with a 7800x3d processor.
so far ive been told that latency&timing of 30 is ideal, but also ive read around that from 30 to 36 wont be any difference, but ideally 30, so if i can only find 32 should be good as well.
with all this information that i had to find around, the options seems to have shortened for me so im in need to ask in here any suggestions of models and brands to consider and which to avoid, been trying to find rams for a good time of the day today, hopefully someone can help me.
amazon, newegg and microcenter are available for browsing just incase.
ASRock X670E Steel Legend
Supports AMD Ryzen™ 8000 and 7000 Series Processors; 16+2+1 Phase Power Design, SPS; 4 x DDR5 DIMMs, Supports Dual Channel, up to 7600+ (OC); 1 PCIe 5.0 x16,, 1 PCIe 3.0 x16,, 1 PCIe 3.0 x1; Graphics Output Options: 1 HDMI, 1 DisplayPort; Realtek ALC1220 7.1 CH HD Audio Codec, Nahimic Audio; 1...
www.asrock.com
this is the motherboard we have our eye on, but we trying to match it with the right ram.
i was looking at information, reading around and apparently its best to get ram with hynix chip instead of samsung, micron (which apparently seem to avoid for some reason)
but i noticed theres 3 variants of hynix: hynix, hynix A-die and hynix M-die.
according to what ive been reading A-die is the way to go if you intend to OC which i dont intent to do this manually, my obj is to set the profile that comes with the ram and that would be the end of it.
M is the second best, but im unsure about the just "hynix" version in this scenario.
with this being said we intend to pair the motherboard and rams with a 7800x3d processor.
so far ive been told that latency&timing of 30 is ideal, but also ive read around that from 30 to 36 wont be any difference, but ideally 30, so if i can only find 32 should be good as well.
with all this information that i had to find around, the options seems to have shortened for me so im in need to ask in here any suggestions of models and brands to consider and which to avoid, been trying to find rams for a good time of the day today, hopefully someone can help me.
amazon, newegg and microcenter are available for browsing just incase.