- Joined
- Jul 31, 2014
- Messages
- 484 (0.13/day)
System Name | Diablo | Baal | Mephisto |
---|---|
Processor | Ryzen 7700 | 2x Xeon E5-2697v4 | i7-13900H |
Motherboard | ASRockRack B650D4U-2L2T/BCM | Supermicro X10DRH-iT | Lenovo Thinkpad P1 Gen 6 |
Cooling | Custom loop | SC846 Chassis cooled| dual-fanned heatpipes with LM |
Memory | 64GiB DDR5-5600 ECC | 256GiB DDR4-3200 ECC RDIMM | 64GiB DDR5-5600 |
Video Card(s) | RTX 3090 Ti Founder's Edition | Embedded ASPEED2400 | RTX 5000 Mobile (80W) |
Storage | many, many SSDs and HDDs.... |
Display(s) | Dell U3014 + Dell U3011 | SMCI IPMI KVMoIP | 3840×2400 Samsung OLED |
Case | Caselabs TH10A | Supermicro SC846 | Lenovo Thinkpad P1 Gen 6 |
Audio Device(s) | Creative SoundBlaster X4 | None | On-board + Moondriver2 Ti + Bluetooth |
Power Supply | Corsair AX1600 | 1200W PSU (Delta) | Lenovo 230W or 300W |
Mouse | Logitech G604 |
Keyboard | 1985 IBM Model F 122-key, Lenovo integrated |
Software | FAAAR too much to list |
I'd like to know that as well, but mainly because I'd like to know if an aftermarket reference waterblock will fit.
Based on the high-res pictures, the holes look to be in the exact same positions, and the same size. The VRMs also seem to be pretty much identical too, minus some very minor placement changes to some low-heat componets..
The EVGA SC+ card on the other hand seem to be indentical to the reference card, right down to the empty pads on the PCB, so you may prefer those instead depending on availability/customer service/pricing.
The cards in question:
Reference
EVGA SC+
Palit Jetstream