Post Your 3dmark05 Scores

[djbbenn]

Ya you might have to go on the net to see what the jumper configs are. As its a Ultra-D it probably doesn't tell you that...

-Dan

 

[gerrynicol]

Yes SLi is enabled

I have the jumpers on board set to dual card mode. Even HL2 stress test I was getting over 100 fps now im getting ~61
I didn't spend loadsa hard earned cash for this rubbish

I think I will do a clean install and go from there.

Cheers again,

Gerry.

 

[Solaris17]

@ solaris17 -- might be time for an upgrade

ya i wish it should be comming though my prdicted in a couple months with the help of my cousin a dual core turon with x800xt? i think ? anyways the one w/ 512 ram 1 or 2 gig corsair or kingston the new creative labs card the fatality 64 mb 2 hdd's 1 w/ 80gig second w/ 200 or 160 this will be in like 4 months though and the specs might change i belive my processor is going to be clocked @ 2.4gig's....it will be sweet my mobo now is sweet though only 3 PCI ports YAHHH! :woot:

 

[wazzledoozle]

I got 4500 a few weeks ago, dont have a orb link for some reasons which are not anyones concern

 

[slavick07]

6500

http://service.futuremark.com/compare?3dm05=1249006

 

[x800xtpe]

couple days ago i got my ac silencer 4 and managed to get some more oc out of it my clocks on my card are 580/625 no artifacts at all . i managed to overclock my cpu a little here it is my ram is backed down from 400mhz to 320 stable timings are 2.5-3-3-7 . cpu is 3.8ghz 3.2 stok with 1.775 vcore @ 35load . my gfx are excelent temps now 45load and 26idle

any ideas if i can get more than 6.5k?

 

[ChAce]

Vmod it...

 

[x800xtpe]

dont think my ac 4 will be enuf for it tho lol . dont realy want water cooling just yet. i woudlt mind 600/630 for clockss

 

[ChAce]

My card did 645/650 Vmodded, no artifacts. W/C owns.

 

[x800xtpe]

fk lol thats a nice oc wat was ur 3d05 score? did u vmod the mem as well?

 

[GoLLuM4444]

Voltmodding's the way forward. Got my clocks from 530/1380 (430/1200 stock) to 630/1550 on my GTXs.

 

[x800xtpe]

the question is will my arctic cooler silencer take any voltmoding??? dont want to overheat it

 

[intel igent]

dont have a orb link for some reasons which are not anyones concern

there are a lot of people who download these programs off the net for free to "try" them out and as a result cannot submit scores to the "orb", myself included

once i learn how to take screen shots ill make that a requirement, good idea?

 

[ChAce]

Ehh... Ever heard of prntscrn?

But screenies can be faked easily, I know that cuz I'm a Photoshop vet myself.

I got about 7,000 with my card, I could have gotten higher if I had tried. I would have, had I not blown up my CPU. Then I said forget it. The card would run in windows at 675/690 lol.

 

[AMDCam]

X800XT PE, I've tried not having synchronized RAM/FSB speeds and my computer always locks up. Are Intel Mobo's or maybe different RAM (mine's PC3200, I've tried 2 types from Corsair, Value Select and XMS Pro) better at that? Because I think my processor could easily go higher, I mean it runs pretty cool, but the RAM might restrict it. Thanks dude, this might help out a lot.

 

[x800xtpe]

ey man yer that helps heaps ..its true that amd and intel boards are dif... im thinkging of vmoding my x800 just not sure if the cooler will be able to handle it. any ideas from any1? and how how we talking of a small vmod? eg i want the clocks about 600/630 .

 

[tazz0r]

ey man yer that helps heaps ..its true that amd and intel boards are dif... im thinkging of vmoding my x800 just not sure if the cooler will be able to handle it. any ideas from any1? and how how we talking of a small vmod? eg i want the clocks about 600/630 .

I've voltmodded my x800xt, and flashed to a PE.
The arctic cilencer will do fine tbh mate, I fun my vgpu @ 1.54v, and mem at 2.23, vddq is 2.45, and I can get 620/620 out of my card. Temps only hit about 60 under hours of games and stuff, Im happy with a temp like that, but everyone has there personal preference and has to have it below like 50

Bit of advice though, dont put your arctic cooler on before you vmod it if you get one, else the sticky mem pads will melt and once they are one, and you take them off the heat conduction is alot less, so mod you card before you put the silencer on and make sure the mods are spot on 'cos you wouldnt wanna take the silencer off agen.

 

[x800xtpe]

would i get much dif in vmdoing performance wise etc? more fps obviously higher oc . would 610/630 be much of a dif from 570/620? also will this kill my card quicker?

 

[TownDrunk]

05 6828
03 13913
01 26948

 

[tazz0r]

would i get much dif in vmdoing performance wise etc? more fps obviously higher oc . would 610/630 be much of a dif from 570/620? also will this kill my card quicker?

Yes it would make a small different, 100, 200, meybe 300+ or so on 3d05.

Thats a 40mhz ont he core, and a 10 on the memory, but people have got alot more performance from vmoding true xtpe's from 520 to 600, so yours should yield a fair amount of performance from 570 to 610. The memory probly wouldnt make much difference from 620 to 630, but thats just an added bonus

As for the temps, as long as you've fitted your silencer properly with all the heat being sucked from the chips with the memory conductor pads and obviously the vgpu has the silencer on it properly, then you should be fine with the temps, just run the fan at 100% all the time.
...This will only kill your card quicker on the new clocks as opposed from the old clocks IF the temperatures of your card on the new clocks make the card run alot hotter.

You can have a properly modded card with good cooling that will last longer than a stock card with shit cooling.

 

[Thermopylae_480]

This is all very interesting, but these scores can fluctuate thousands of points just by changeing a few settings, i.e. (changeing resolution to 800x600 from 1024x768) the only way to really get an accurate comparison is to set up a post with a standardized test criteria. Just an Idea.

3D Mark 03 10412

 

[tazz0r]

Well when you open 3dmark 05, It should set a default setting. If you have all your gfx settings
set to 1024x768 and your quality settings set to application preference then it should do the tests defaultly.

3dmark 05 = 7184

 

[jeremymtc]

3DMark05 7213

P4 3.4C@3.8 w/XP-90
Abit IC7-G MaxII w/NB-1
X800XT AIW @604/615 w/VF700
OCZ EL Gold PC4000

 

[tazz0r]

I say 7184, but today pushed the card to 617/617 and got 7350 on 05

This is on default 'application settings' and 1024x768

 

[Mad Cow]

i got 8932 last time i tried with my 7800 gtx. btw how dangerous is voltmodding in terms of temp. i dont mind cuz my evga warranty saves me from anything :/ what about flashing?. if its not that dangerous to the card i would like to try it