Post your 3dmark06 HD 3K Series Results

[Kirby123]

Just to let you know, when it says your core is at 837, it's at 837. You have to bump your OC up to about 852 to get 850.

i have noticed that when monitoring the rivatuner, my consern is the unclockable second core XD.... i get my E8400 in 2 weeks. prolly going to upgrade to 1066 ram 4 gb soon. anyone know about the 790XF with crossfireX?

 

[mastermachman]

Not sure whats up here I went to AMD / ATI and found all this Intel crap !!!!!! antway here is my system info , I dont have 3DMARK06 but use 3DMARK05. here are my pictures

I have 4800+ AND chip
2 GB of ram
running 7950GTX DDR3-512 in SLI
I built this machine 2 and a half years ago and was the shit then

AMD WILL RULE AGAIN, MY NEXT MACHINE WILL BE INTEL....lol

over 9000

 

[freaksavior]

Just to let you know, when it says your core is at 837, it's at 837. You have to bump your OC up to about 852 to get 850.

well its weird, because gpu-z shows it at 850mhz and when i get fur bench to run it hist 850.

also, my his card wont post atm. its blowing my mind! i had the TT installed, ran the test, uninstalled it and installed the vf-900. now the system hangs on DET VGA BIOS

 

[asb2106]

Not sure whats up here I went to AMD / ATI and found all this Intel crap !!!!!! antway here is my system info , I dont have 3DMARK06 but use 3DMARK05. here are my pictures

I have 4800+ AND chip
2 GB of ram
running 7950GTX DDR3-512 in SLI
I built this machine 2 and a half years ago and was the shit then

AMD WILL RULE AGAIN, MY NEXT MACHINE WILL BE INTEL....lol

over 9000

You can download 3dmark06 for free at filehippo.com

Do that, buy a RADEON HD 3000 series card!! then come post your score!!!!!!!!!!

 

[mastermachman]

Is that now top shelf video card?, I'll look it up ...Thank you for the tip...wilco!!

 

[asb2106]

Is that now top shelf video card?, I'll look it up ...Thank you for the tip...wilco!!

no problem

Top shelf right now(for ATI series) would be 3870x2 or just a 3870(cheap, but great mid-range part)

This forum is just a comparison of all HD3000 series cards, if you want to get 06 and post your score, post it here !! - > http://forums.techpowerup.com/showthread.php?t=25995

Make sure to put ADD THIS as the subject of the post. And that forum is not for discussion, only results. So throw it up there, and read the first post very well to get good instructions on following the forum rules. Check out the discussion page too,there is alot of useful info there

EDIT** You have a 7950GTX right?? Sad thats not all that hot anymore

I have 2 7800GTXs, paid up the ASS for them, and now they are pretty much worthless! I ended up selling them for 250 bucks for both. I paid over 1k for the two of them

EDIT#2** Fill out your system specs and info! Lets see what yah got

 

[freaksavior]

I do believe my HIS has bitten the dust.

 

[asb2106]

I do believe my HIS has bitten the dust.

my god, your cards must hate you!! Have you received the trim pots yet??

 

[freaksavior]

my god, your cards must hate you!! Have you received the trim pots yet??

Nope, not yet, and i think they do! im SERIOUSLY considering selling them, getting some cheapo card that will run tf2 and waiting for the 4870's to appear and buying two of those and running in crossfire.

 

[asb2106]

Nope, not yet, and i think they do! im SERIOUSLY considering selling them, getting some cheapo card that will run tf2 and waiting for the 4870's to appear and buying two of those and running in crossfire.

well you may as well hang with the 3870s till the release of the 4800's, why not. Then you will have some decent graphics power. I wouldnt game with anything less that a 3870 anymore. Especially for the price 150 bucks is a low to mid range price. And I consider the 3870 to be a mid to high range card. Anything that can do 16k(even though its voltmodded and water cooled) is a high end to me

 

[mastermachman]

looking now for what a top of pile, will post again latter thankyou for the info..

 

[Fahim]

Hardly broke 10K with my old CPU.....

http://service.futuremark.com/compare?3dm06=6077088

I will do the bench again and post later.....

 

[Dr. Spankenstein]

I do believe my HIS has bitten the dust.

You need to ship your X2 directly to me when you receive it. I will not sit idly by while you kill another brave card.

You're like the harbringer of DOOM for these poor things. Every stop to ask: "Why is this repeatedly happening?"

 

[asb2106]

You need to ship your X2 directly to me when you receive it. I will not sit idly by while you kill another brave card.

You're like the harbringer of DOOM for these poor things. Every stop to ask: "Why is this repeatedly happening?"

I feel bad for the guy. I doubt he is doing this on purpose!! Hey, thats the beauty Of the RMA

 

[freaksavior]

i wish i was getting a x2. and i dk what happened to the HIS honeslty. i changed the cooler thats all. did the same as before. didn't post. took it to best buy and tested it in there machine and it still doesn't work. arg

 

[Kirby123]

i wish i was getting a x2. and i dk what happened to the HIS honeslty. i changed the cooler thats all. did the same as before. didn't post. took it to best buy and tested it in there machine and it still doesn't work. arg

depending on what cooler you put on your card. what card was it? the his usually give the proper cooling system for it. if your just putting a diff fan on it then it most likely will mess up. i went through 3 his cards untill i found out that the only cooling i could change it out with was liquid.... im sticking with fan on my new HIS hd 3870 X2

 

[Dr. Spankenstein]

Oh, if it happened during a cooler change, it's probably still salvagable.

 

[Kirby123]

my HIS hd 3870 X2 temp stays from 40-50 max with max load right now... since my cpu is so crappy right now i got a 2659 on 3d mark 06........ -.- lame i know.....

 

[asb2106]

Oh, if it happened during a cooler change, it's probably still salvagable.

what do you think he has to do to bring it back??

 

[freaksavior]

Oh, if it happened during a cooler change, it's probably still salvagable.

Indeed. what do i have to do? i got a tf2 party to atend saturday (wich your all invited too) and i really wanna play.

Im buying a G15 tomorrow and my camera (canon 40D)

 

[Dr. Spankenstein]

freak,
You know what a stickler for details I am.

Start from the beginning at tell me everything. (Ah, it's kinda like therapy...)
I need to know what cooler, what TIM, any problems with the install and pics if you have them.

 

[casper250c]

15,097

 

[freaksavior]

freak,
You know what a stickler for details I am.

Start from the beginning at tell me everything. (Ah, it's kinda like therapy...)
I need to know what cooler, what TIM, any problems with the install and pics if you have them.

pics i got so many pics!!

Ok so here goes! i turned off my comp, pulled the card out, got my alcohol out, rubbed the tim off, applied some MX-2 and seating my TT duo orb. installed fine, (had a little issue, used the wrong nipples and it was a high on one side and low on the other) The card kept shutting down because the core kept overheating (this happened 3 times )

Installed the card, and heatsink, ran fur bench for 10min topped at 72c.

Turned off the computer, and removed heatsink. clean tim with alcohol let it evaperate then proceded to install vf-900. stuck it in. and nothing.

http://forums.techpowerup.com/showthread.php?t=58586

 

[freaksavior]

nothing doc?

 

[Dr. Spankenstein]

Yhgpm