• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

PowerColor Readies Overclocker-Friendly Radeon HD 5770 PCS++ Graphics Card

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
47,670 (7.43/day)
Location
Dublin, Ireland
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard Gigabyte B550 AORUS Elite V2
Cooling DeepCool Gammax L240 V2
Memory 2x 16GB DDR4-3200
Video Card(s) Galax RTX 4070 Ti EX
Storage Samsung 990 1TB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
PowerColor is working on a new Radeon HD 5770 graphics card that's geared for overclocking, the HD 5770 PCS++. The new model, while retains the same out of the box clock speeds and cooling as the HD 5770 PCS+, uses a redesigned PCB with high-grade VRM for higher overclocking potential. It has out of the box clock speeds of 875/1225 MHz (core/memory), against reference speeds of 850/1200 MHz. The ATI Radeon HD 5770 GPU packs 800 stream processors, and connects to 1 GB of GDDR5 memory across a 128-bit wide memory interface.

The PowerColor HD 5770 PCS++ borrows its PCB design from the PowerColor HD 5750 Go! Green, (HD 5750 and HD 5770 are based on the same Juniper GPU and are hence pin-compatible) which we recently reviewed. To do away with the 6-pin auxiliary power connector, the Go! Green card relied on a high-efficiency digital PWM circuit with three vGPU and two vMem phases, driven by a Volterra VT1165 voltage controller which supports software voltage control. From the looks of it, the PCS++ reuses the same PCB, but with the 6-pin power connector in place for added power. Despite the lack of this connector, and having passive cooling, the Go! Green card managed GPU and memory overclocks of 10% and 25%, making us expect even higher with this card. Its cooling system includes a GPU cooler made by Arctic Cooling, with independent heatsinks over the memory and VRM chips. It is expected that PowerColor prices the HD 5770 PCS++ at 10 EUR / 15 USD higher than the HD 5770 PCS+, which is around US $170.



View at TechPowerUp Main Site
 
Last edited:
That's pretty pricey for what will probably be about the same amount of headroom from the reference designs.
 
Looks good,but i'm happy with my Vapor-X...
 
Looks nice, but $200! Thats almost the MSRP of the 5830! (of course as well all know though, nobody sells the 5830 for its MSRP)
 
Updated price, PowC said it's just $170.
 
Less than 5% OC. Wow. Well blow me over. Am I supposed to get excited about that?

Far better for them to design a cool and quieter edition, possibly mildly underclocked, for people that spend most of their time NOT gaming, and would be ready to lose 1-2 fps for a silent low power low heat eyefinity card... that significantly outperforms the 56xx and 5750.
 
AMD does not allow partners to exceed a certain type of clockspeed, therefore 25MHz increase is not stunning but by making a better PCB and cooling you can overclock it yourself.
 
Not bad and the price is roughly $15 USD higher than current 5770 cards.
 
Looks like an Arctic Cooling heatsink on that.
 
PCS++

Will it have voltage control?

if so i'm in :D
 
PCS++

Will it have voltage control?

if so i'm in :D

Pretty sure the VT1165 supports software voltage control, yes.

Noise be damned, I still like the 5770 with the bigass leaf blower. Makes you feel like a man when it revs up to speed and blows your ears out.
 
Looks like an Arctic Cooling heatsink on that.

Says so in the post. It's the one they've been putting on the low power cards for a while now.
 
OMZJ!

:O

Did I see lemonadesoda?!

This is definitely the sort of card I'd purchase, will we be seeing a TPU review at all Bta?
 
This is definitely the sort of card I'd purchase, will we be seeing a TPU review at all Bta?

I thought by now you'd be familiar with W1zzard's stone slab (look at the pictures).
 
I thought by now you'd be familiar with W1zzard's stone slab (look at the pictures).

I pay more attention to what he is reviewing than his decor tbh. Still, I look forward the review.
 
God damn it, why won't they use the L2 Pro (4pin, PWM controllable fan) instead of a normal L2 (2pin, non-controllable)? They could at least put a proper HSF on a card that's mean't to be overclocked.
 
Back
Top