Realtek Modded Audio Driver for Windows 10/11 - Only for HDAUDIO

[CityCultivator]

Dear Alan,

I just tried to install in on one server 2016, but encountered error message pop up, said this program does not support the version of windows.

I thought 2016 is same kernel as 10, so not understand why cannot install.

Best wishes,
Jeff

Your edition of server 2016 most probably not properly support Atmos audio and may additionally not fully support the latest UWP app; server 2016 is based upon an older edition of windows 10.
Try Wndows server 2019.

 

[Mason76]

I inistall old version alana driver with creative 720 and dolby ,sound alive and viaHD,my botebook still very lag in games!micro freaze everywere and bad work wifi module!i delete this driver in DDU and my pc work very good and speed!
Sorry my bad english!

How a fully delete and clear mu system after alans driver?DDU not delet at all!please help and guide me. Please

 

[andreaspujihar]

Hi,i am new member is supporred for alc255???

 

[Màthair]

Hi,i am new member is supporred for alc255???

yes, is supported!. u can install it, just follow the instructions created by the owner of the driver, are inside the folder.

 

[5demid5]

Please post separately realtek asio driver

 

[azu1]

Hi i need help here, i installed latest driver RealtekDriver_2019_03_01 build, during installation i have YES Dolby Digital Plus Home Theatre, then restart the PC, where i can i find the GUI Digital Plus control panel. it wont show up in start menu/tray bar.

 

[AAF Optimus]

Hi i need help here, i installed latest driver RealtekDriver_2019_03_01 build, during installation i have YES Dolby Digital Plus Home Theatre, then restart the PC, where i can i find the GUI Digital Plus control panel. it wont show up in start menu/tray bar.

Good Morning.
Just execute the following command:
cmd /k reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run /v DDP /t REG_SZ /d "%programfiles%\Dolby Digital Plus\ddp.exe" /f
Ready! On the next reboot, it will pop up in the system tray.

 

[AAF Optimus]

New Realtek Audio Drivers Released
Updated Version to 6.0.1.8656

ATTENTION: This driver package is intended for those who are having many problems with their PCs, such as excessive memory or cpu usage, very high audio latency, etc. However, it does not have as many resources.
People who want superior audio quality on their Realtek chip, but value the audio latency of their systems, for this reason the few resources.

Spoiler: FOLLOW HERE THE DRIVER LINK:

https://1drv.ms/u/s!Avmj2CMC-f2bt2gtmKaciyu91eZk

Spoiler: ENHANCENTS:

Sound Blaster X-Fi MB5
DTS Audio
DTS Digital Entertainment
VIA HD Audio Effects
DTS Connect
DTS Interactive 5.1 Surround

Spoiler: CLARIFICATION:

Sound Blaster X-Fi MB5 is an old suite from Creative, but in this case, I decided to include it because of the greater control over the audio output points. Ex: You can choose the Realtek audio output point you want to use.

Spoiler: IMAGES:

Realtek Audio Manager with DTS Interactive:

DTS Audio:

X-Fi MB5:

VIA Enhancements:

DTS Digital Entertainment (Includes the effects quoted in the image):

Enjoy it.

 

[grich]

thanks!

 

[Xeonic]

New Realtek Audio Drivers Released
Updated Version to 6.0.1.8656

ATTENTION: This driver package is intended for those who are having many problems with their PCs, such as excessive memory or cpu usage, very high audio latency, etc. However, it does not have as many resources.
People who want superior audio quality on their Realtek chip, but value the audio latency of their systems, for this reason the few resources.

Spoiler: FOLLOW HERE THE DRIVER LINK:

https://1drv.ms/u/s!Avmj2CMC-f2bt2gtmKaciyu91eZk

Spoiler: ENHANCENTS:

Sound Blaster X-Fi MB5
DTS Audio
DTS Digital Entertainment
VIA HD Audio Effects
DTS Connect
DTS Interactive 5.1 Surround

Spoiler: CLARIFICATION:

Sound Blaster X-Fi MB5 is an old suite from Creative, but in this case, I decided to include it because of the greater control over the audio output points. Ex: You can choose the Realtek audio output point you want to use.

Spoiler: IMAGES:

Realtek Audio Manager with DTS Interactive:
View attachment 119313

DTS Audio:
View attachment 119314

X-Fi MB5:
View attachment 119315

VIA Enhancements:
View attachment 119316

DTS Digital Entertainment (Includes the effects quoted in the image):
View attachment 119317

Enjoy it.

When headphones are connected, the sound goes through the speakers. Help!

 

[ToniM_8]

Thanks Alan

 

[imnambarn]

which one is best Sound Blaster X-Fi MB5 vs SoundBlaster x
My headphone is Sennheiser Game zero 7.1

 

[SoNic67]

When headphones are connected, the sound goes through the speakers. Help!

I have reported this a long time ago. There is no switching from rear to front outputs...
I guess nobody can work that one out.

 

[movi21]

Alan Finote modded for win 7 pls

 

[Kellicros]

New Realtek Audio Drivers Released
Updated Version to 6.0.1.8656

ATTENTION: This driver package is intended for those who are having many problems with their PCs, such as excessive memory or cpu usage, very high audio latency, etc. However, it does not have as many resources.
People who want superior audio quality on their Realtek chip, but value the audio latency of their systems, for this reason the few resources.

Spoiler: FOLLOW HERE THE DRIVER LINK:

https://1drv.ms/u/s!Avmj2CMC-f2bt2gtmKaciyu91eZk

Spoiler: ENHANCENTS:

Sound Blaster X-Fi MB5
DTS Audio
DTS Digital Entertainment
VIA HD Audio Effects
DTS Connect
DTS Interactive 5.1 Surround

Spoiler: CLARIFICATION:

Sound Blaster X-Fi MB5 is an old suite from Creative, but in this case, I decided to include it because of the greater control over the audio output points. Ex: You can choose the Realtek audio output point you want to use.

Spoiler: IMAGES:

Realtek Audio Manager with DTS Interactive:
View attachment 119313

DTS Audio:
View attachment 119314

X-Fi MB5:
View attachment 119315

VIA Enhancements:
View attachment 119316

DTS Digital Entertainment (Includes the effects quoted in the image):
View attachment 119317

Enjoy it.

Thanks for the update but it seems to mess up my channels/jacks. Eg: sound from real speakers would come out from my front speakers, I made sure I have the jacks inserted properly and everything went back to normal when I revert to an older driver, any idea why is this happening?

 

[SoNic67]

The channels/jacks are messed up here too. If I have installed Intel HD Audio, I have two different entries in Windows sound output settings - one for front jack and another for rear jack.
I can choose to use either the rear jack (speakers) or the front jack (headphones).
Also with generic drivers I can see the microphone jack too (front).

If I install any of those modded drivers, I have only one entry, labeled "Speakers/Headphones" and that is connected to rear jack.

 

[Kellicros]

Yes, I believe the channels are bugged in the modded drivers, everything's working fine on generic drivers (same driver version).

EDIT: Just tested with a headset, I am experiencing the same thing, both head set and speakers are outputing sound.

 

[SoNic67]

This is how the official driver looks like. You have the option to separate the front output from rear output, if so desired. I didn't see that in the modded drivers.

 

[imnambarn]

alan can you do
SBX PRO STUDIO
please https://www.soundblaster.com/technology/sbx-pro-studio

 

[koochan93]

dont work with the ALC3240

 

[xangr]

@Alan Finote, Is it possible to get Nahimic + Atmos for .8656? .8642 has atmos installed and nahimic. .8656 has no nahimic and atmos.

 

[RapToX1337]

Sound Blaster X-Fi MB5 works now. SBX PRO STUDIO works like a charm.
The only thing not working in the X-Fi MB5 is advanced settings and speaker calibration. If i try to choose my speakers or something else, the program crashes.

The next problem is, if you activate DTS Surround and then, for example, listening to music on YouTube and pausing it, DTS automatically disables itself. Not in the driver but the decode ( Logitech Z906 ) light goes off and goes back into 4.1 or something else and you hear a scratch like sound in the speakers.

Also if I try to start the program "DTS Audio" an Error appears: "DTS Audio is unavailable for the specified audio device."

Everything else works so far.

 

[Mach11978]

ok so i have

• 7.1 CH HD Audio (Realtek ALC1220 Audio Codec), Supports Purity Sound™ 4 & DTS Connect now i have a the 55500s i just want laod explosions for games and movie what would be the best mod for this

 

[dakila]

Does it work with Acer Aspire Notebooks?
Creative 720 doesn't find my Realtek after install...
And if i try to change my Sounddrivers manually to the Advanced one it ends with Bluescreen as result..
Did i do something wrong?

That's my Realtek specs: FUNC_01&VEN_10EC&DEV_0255&SUBSYS_1025103B&REV_1000
My System is Windows Home v1809

 

[CntrlAltDel]

Absolute great work. I used this driver instead of the Win7 driver for my "Realtek ALC892" and there's a significant difference in sound quality on my old school amp.

Problem is when any sort of sound is played the sound would randomly dim and then go back to loud, I'd have to increase and decrease volume constantly to compensate for the dimming of the sound. Any solution for this?

Windows 10 x64 Pro