Realtek Modded Audio Driver for Windows 10/11 - Only for HDAUDIO

[CityCultivator]

I'm likely an idiot who has missed something obvious, but every time I try to use your installer it never gets passed "Current Task: Stopping Windows Audio Service...". It hangs there forever. Any suggestions?

Try to stop the service manually.
1. Win+X
2. Run
3. Enter "Ssrvices.msc".
4. Search for Windows Audio. Right-click the service and click "Stop".

 

[Jesstor]

Try to stop the service manually.
1. Win+X
2. Run
3. Enter "Ssrvices.msc".
4. Search for Windows Audio. Right-click the service and click "Stop".

Thanks! That worked for me. I finally have glorious 5.1 surround after all these years of thinking I already did haha! Realtek audio manager still doesn't work so I can't really configure it, but it still sounds WAY better than it did before. Thanks everyone.

 

[Giaki]

Hi,
VERSION 6.0.8911.1
everything works fine except for the creative software that didn't recognise the audio card.

I have a ALC1220

 

[cmlo-sncz]

OP... Thanks... Not that I'm needing this mod because I'm driving a coax S/PDiF from my asus p5q pro (ALC1200) to my Denon AVR-X1300W in 5.1.2 speakers setup.
However I want to control the sound from my PC an not from my receiver.
This setup realtek GUI remember me the "Unlocked Dolby digital live and DTS interactive form @2bad that I'm using since the beginning.

But as you can see the default is "RCA" and not "SPDIF" also my rear speakers aren't as loud as supposed to be... However there is good enhancement across the spectrum.

Wonder to know if i chose the right mod for my set up... thanks...

/Windows 10 2004 19041.172

 

[SoNic67]

The Creative Panel says "device is not recognized".
This is what Audio Device detects.
Any ideas?

 

[dexter94]

sound too metalic in last drivers anyone?

 

[Aden]

Hello guys/gals am having issues with installing this Audio driver mod and any other audio mod i honestly dont know why i tried everything i know
i have Windows 10 2004 build 19041.172 its the next RTM release and i think its the problem i dont know why its just the stock driver literally wont change or update
i tried even Driver explorer to clean drivers as last resort
i tried disabling driver signing
i tried uninstalling every audio driver i have
My Laptop specs are :
Windows 10 2004 x64 bit Enterprise
Clevo W540
i7 3632QM
10GB RAM
i dont know what more info i could add My knowledge in audio is very low sorry
-Am open to all suggestions-

 

[Jirkapas]

Hi, I have installed the modified driver on my laptop Lenovo Legion Y530.
When i try to open Dolby Atmos I keep getting a message that says "This app ins't compatible with your device."
I have tried to reinstall the driver but its still the same.

Thanks for any suggestions.

 

[Jewelson]

Is there a working Appx for DTS sound unbound?

Also how is it possible to add multiple properties tab in the Audio properties? I know how to add one using the FX Configurator but I wonder how Alan put many Tabs in the properties.

 

[abrfilho]

I installed the latest version here on my Dell G3 3579 with ALC236, only Nahimic worked but Waves MaxxAudio came back to life here, nothing to complain.
I'm glad that MaxxAudio came back because this program manages the combojack to know when it's a headset and when it's only speakers.

 

[CityCultivator]

Is there a crack for DTS sound unbound?

Also how is it possible to add multiple properties tab in the Audio properties? I know how to add one using the FX Configurator but I wonder how Alan put many Tabs in the properties.

READ THE FORUM GUIDELINES!

 

[Bagger1113]

Hi! I have a problem. I used this mod for almost 6 months, and I wanted to update the whole driver/software, so I deleted the old one,restarted, and installed the latest (6.0.8911.1) but now I don't get any sound after the 2nd restart. I've left everything on default in the installer, but I installed only the Nahimic controller (I used to this one). It shows up as AAF Analog out (or something like that) in the audio devices , so it looks like it works, but I don't get any sound.(just only on my monitors built in speakers through HDMI if i switch to it)

I faced the same problem with my notebook. It's installed it, but no sound. Neither on the built in speakers nor when I use the headphone jack.. But it detects when I plug one in the jack.

My pc is an HP EliteDesk 800 G1 (Realtek ALC221) and I use the 3.5mm jack on the back of the pc. My notebook is a Surface Book 2. Both of them used to work with older (3-6 month old ones) versions. Did I miss something? (I used earlier versions which didn't have the asio driver, or the realtek utility)

Thanks in advance, and sorry for my poor english.

 

[Jewelson]

Also how is it possible to add multiple properties tab in the Audio properties? I know how to add one using the FX Configurator but I wonder how Alan put many Tabs in the properties.

 

[itachimendes]

@Alan Finote
onde estão os Aprimoramentos?? (where is the Enhancement
tab??)

 

[max_clif]

how do i disable Neo ?

 

[AAF Optimus]

@Alan Finote
onde estão os efeitos?? (where is the effects tab??)
View attachment 150065View attachment 150066

@itachimendes
Check the 1st post for the spoiler named "IF NO EFFECTS ..."

 

[H4cziLLa]

Making Audio Enhancers Work on Windows

Where can I get the modded Nvidia drivers with dolby digital / DTS output on hdmi? The one I got is crashing after sometime of use... Can someone share it? Is still possible to get dolby or dts encoding from Nvidia hdmi using the latest drivers? Can someone confirm it? Sorry for having so...

www.techpowerup.com

 

[SoNic67]

DOWNLOAD MY DRIVERS FROM HERE:
...

Alan, I have installed your drivers and I am missing the front sockets.
When I use my original drivers, the front of the computer socket has sensing for the headphones. The rear has speakers connected to it. So I can switch between the two in the Windows 10 selection (taskbar speaker).
With your modded drivers, that option is gone, I only have output from the rear of the computer, not from front.
Also, in the front I had plugged in a microphone that now is not sensed anymore.

Any solution to activate the front jacks?



When I use the "Realtek" driver, the front microphone and line out re-appear, with autosensing.
The Intel driver exposed the rear and front separated in Windows Volume, no autosensing.

 

[Danny]

hello. im new here. can i ask why after i install this AAF driver. all sound is fine. except my microphone in front panel keep freezing and have to disable effect otherwise it cant work. anyway to fix so mic can use nahimic or sb effect? thank you

 

[antonkaz]

Hi Alan! Hello to all!
You cam make modded driver for my sound card Asus Xonar DX?
Please.
APO Drivers not work on this
Thanks very much

 

[EvolutionXIII]

Anyone with analog output got the audio effects to work with the latest driver? I've followed the instructions on the first page and checked only the drvctrl40 where the RunningOnWindows8point1 is located but absolutely none of the effects, from the Dolby atmos to soundblaster and the realtek are working. The old Dolby only effects (6.0.8835.1) driver that I was using worked perfectly though.

Edit: To anyone who gets the same problem, make sure to select the default apo and not the one with ddl and dtsi.

 

[H4cziLLa]

DOWNLOAD MY DRIVERS FROM HERE:

Releases · AlanFinotty/AAFRealtekMod

Realtek Audio Driver Mods by Alan Finotty. Contribute to AlanFinotty/AAFRealtekMod development by creating an account on GitHub.

github.com

VERSION UPDATED TO 6.0.8911.1

Spoiler: FROM WINDOWS 7 & WINDOWS 8

• REALTEK DEFAULT EFFECTS
• CREATIVE SOUND BLASTER X-Fi MB5

Spoiler: FROM WINDOWS 8.1 TO WINDOWS 10 14393

• REALTEK DEFAULT EFFECTS
• CREATIVE SOUND BLASTER X-Fi MB5

Spoiler: FROM WINDOWS 10 15063 ONWARDS

• REALTEK DEFAULT EFFECTS
• REALTEK DEFAULT EFFECTS WITH DDL/DTS
• CREATIVE SOUND BLASTER CONNECT 2 (LEGACY)
  • 360°
  • 720°
• NAHIMIC 3
• DOLBY ATMOS

IMAGES (WINDOWS 10):

CREATIVE PANEL (LEGACY) WITH 720° LICENSE
View attachment 145072

NAHIMIC 3
View attachment 133729

DOLBY ATMOS
View attachment 143507

Spoiler: HOW TO ACTIVATE DOLBY DIGITAL LIVE ?

1 - Open "Realtek Audio Device Tweak" from your Desktop.
2 - Check the box "Customized Platform".
3 - Edit the double fields "VID", "PCI VID" and "Verb VID" and leave as it is in the image below:

View attachment 136200

4 - Click "Save" to save changes and restart your computer.

RESULT IMAGE:

View attachment 136201

Spoiler: HOW TO ACTIVATE DTS INTERACTIVE ?

1 - Open "Realtek Audio Device Tweak" from your Desktop.
2 - Check the box "Customized Platform".
3 - Edit the double fields "VID", "PCI VID" and "Verb VID" and leave as it is in the image below:

View attachment 136202

4 - Click "Save" to save changes and restart your computer.

RESULT IMAGE:

View attachment 136203

Spoiler: IF NO EFFECTS ARE WORKING, EVEN THE REALTEK ONES ?

Open "Realtek Audio Device Tweak" on your Desktop and follow the steps below:

• Go to "Driver Policy" and in the "FindPolicyText" search field look for the "RunningOnWindows8point1" policy.

View attachment 145079

• Finding it, check the set (DrvCtrl??) which this policy is present.

View attachment 145076

• Check the set containing the policy, but deselect the policy.

View attachment 145077

• Click "Save" to save the changes and restart your computer.

View attachment 145078

ENJOY !!!

Here are download links:

File on MEGA

mega.nz

File on MEGA

mega.nz

File on MEGA

mega.nz

File on MEGA

mega.nz

Have fun!

 

[max_clif]

What's with the continuous huge pictures of your desktop every page multiple times, H4cziLLa? It's incredibly distracting and hard to scroll through the pages where you just spammed like a psycho.

 

[AAF Optimus]

Alan, I have installed your drivers and I am missing the front sockets.
When I use my original drivers, the front of the computer socket has sensing for the headphones. The rear has speakers connected to it. So I can switch between the two in the Windows 10 selection (taskbar speaker).
With your modded drivers, that option is gone, I only have output from the rear of the computer, not from front.
Also, in the front I had plugged in a microphone that now is not sensed anymore.

Any solution to activate the front jacks?

1º - Uninstall my mod;
2nd - In its third image, there is "Realtek High Definition Audio". Uninstall it;
3rd - Open Windows Explorer, browse to "%systemroot%\System32\drivers", delete the file "rtkhdaud.dat" and restart your computer.

Then try to install the mod again.

 

[Danny]

1º - Uninstall my mod;
2nd - In its third image, there is "Realtek High Definition Audio". Uninstall it;
3rd - Open Windows Explorer, browse to "%systemroot%\System32\drivers", delete the file "rtkhdaud.dat" and restart your computer.

Then try to install the mod again.

i try many way to uninstall everything related to audio. reinstall the AAF. Do the if not effect things in quote. No use. The microphone still bugged and stop working the driver when i enable effect. anyway to solve it? thanks.