Share your AIDA 64 cache and memory benchmark here

Apocalypsee · Jul 8, 2020

Can't go more than 1800MHz FCLK so I optimize my RAM timing a bit. Generic B-die still can perform well, I can't use Ryzen DRAM calculator settings so I manually tweak the timing one by one. This is with Geardown disabled.

nico_80) · Jul 8, 2020

Here's my bench after new ram install!

Athlonite · Jul 9, 2020

cucker tarlson · Jul 10, 2020

4133 c19-21-21 trfc550 @ 4133 c16-16-16-31 trfc 400
vccio at 1.1v vccsa at 1.2v
ring 42x,can't go any higher on 10500

still can't go lower than 41ns.any tips ?

Tatty_Two · Jul 10, 2020

When I had that initial play the day I installed and ran mine at 4000mhz at CL16 (1.4v Dram) with VCCIO and SA voltage at 1.20 they would boot me into windows but fail 15 minutes into a stress test, I increased both voltages slightly (I think 1.23v) and they were fine, give that a try and see if you can get some more out of them although personally I would not go above 1.25v for everyday use.... looking forward to a bit more time to tweak again!

cucker tarlson · Jul 10, 2020

Tatty_One said:
When I had that initial play the day I installed and ran mine at 4000mhz at CL16 (1.4v Dram) with VCCIO and SA voltage at 1.20 they would boot me into windows but fail 15 minutes into a stress test, I increased both voltages slightly (I think 1.23v) and they were fine, give that a try and see if you can get some more out of them although personally I would not go above 1.25v for everyday use.... looking forward to a bit more time to tweak again!

Im getting 4133 c16 stable at 1.1 vccio and 1.2 vccsa.
including memory stress test.
weird to see a locked i5 requires lower imc voltage than K,but that's possible.

wanna see what happens with 4000 c15

Tatty_Two · Jul 10, 2020

It could have been something else causing the instability but if I remember correctly I was on 1t on that run so perhaps it was that but the extra voltage seemed to help.

Edit: I like to see what I can get on 1.4v, prefer not to go higher although I know these kits will do 4500mhz at CL18 on around 1.45.

cucker tarlson · Jul 10, 2020

what happens with 4000 c15 is no boot is what happens.I know even some 4400 bins cant do 4000 c15.

still,4133 c16-16-16 is remarkable for a kit this price.

Tatty_One said:
It could have been something else causing the instability but if I remember correctly I was on 1t on that run so perhaps it was that but the extra voltage seemed to help.

Edit: I like to see what I can get on 1.4v, prefer not to go higher although I know these kits will do 4500mhz at CL18 on around 1.45.

I think 1.45v is fine especially with lots of airflow going on.with a clc I'm not sure.

Tatty_Two · Jul 10, 2020

cucker tarlson said:
what happens with 4000 c15 is no boot is what happens.I know even some 4400 bins cant do 4000 c15.

still,4133 c16-16-16 is remarkable for a kit this price.

I think 1.45v is fine especially with lots of airflow going on.with a clc I'm not sure.

Mine didnt even get warm at 1.45v (3 x 140mm front fans) on the only run I used that voltage on which was at 4400 cl18.

Edit: Just running them at 4133 17-17-17 currently until I tweak again at 1.4v with SA at 1.2 and VCCIO at 1.18.

cucker tarlson · Jul 10, 2020

mine are 3x120 with lots of pressure,the sticks are getting plenty of air.
seems like I'll settle for 41ns at 4133 16-16-16 trfc 400, no need to push further cuz voltages would be too high for my taste.
and yeah,the heatsinks are cool even after a stress test on a hot day

I'm such a dummy.
I tried cr1 on 4133 c16 and didn't post,then wondered why my previous settings won't work again.of course I forgot to set cr back to 2.

may wanna tinker with cr1 later,I got dmc5 to start atm

Sir_Crystal · Jul 10, 2020

How can I achieve latency under 40ns?
I have 2x8 F4-3200C14D-16GVK which I could push to 3600 cl14-14-14-34 ct1 rtfc 350 tfaw 28 1.5v 1.2 VCCSA/VCCIO but after bios update i can no more :c
Right now I am using 4000cl16-16-16-36 ct2 with same voltage and sa/io but now trfc is 374 and tfaw is 28

What I can improve to break the barrier?

cucker tarlson · Jul 10, 2020

Sir_Crystal said:
How can I achieve latency under 40ns?
I have 2x8 F4-3200C14D-16GVK which I could push to 3600 cl14-14-14-34 ct1 rtfc 350 tfaw 28 1.5v 1.2 VCCSA/VCCIO but after bios update i can no more :c
Right now I am using 4000cl16-16-16-36 ct2 with same voltage and sa/io but now trfc is 374 and tfaw is 28

What I can improve to break the barrier?
View attachment 161800

I can't do lower than 41 with 4133 c16
stuck at 41.5

Arctucas · Jul 10, 2020

Sir_Crystal said:
How can I achieve latency under 40ns?
I have 2x8 F4-3200C14D-16GVK which I could push to 3600 cl14-14-14-34 ct1 rtfc 350 tfaw 28 1.5v 1.2 VCCSA/VCCIO but after bios update i can no more :c
Right now I am using 4000cl16-16-16-36 ct2 with same voltage and sa/io but now trfc is 374 and tfaw is 28

What I can improve to break the barrier?
View attachment 161800

I believe you would under 40.

Mine on the right, yours on the left. My timings.

Rock N Roll Rebel · Jul 10, 2020

here is mine with 64gb tell me how i did

Sir_Crystal · Jul 11, 2020

Arctucas said:
I believe you would under 40.

Mine on the right, yours on the left. My timings.

View attachment 161820

View attachment 161821

So its the difference between cpu's? More threads give better latency?

mouacyk · Jul 11, 2020

9900k-50x50x47-4000-16-17-17-36-2T-1.45v.png

Arctucas · Jul 11, 2020

Sir_Crystal said:
So its the difference between cpu's? More threads give better latency?

Not sure, maybe someone knows?

EDIT: A 9900K has 4MB more L3 cache and a Turbo of 5000MHz vs 4900MHz for the 9700K, and the 9700K is non-hyperthreaded.

Here is another run on my 9900K with HT off.

mouacyk said:
View attachment 161875

Not bad, what RAM kit?

mouacyk · Jul 11, 2020

Arctucas said:
Not bad, what RAM kit?

2x8GB TridentZ 3600C15

Arctucas · Jul 11, 2020

mouacyk said:
2x8GB TridentZ 3600C15

Nice overclock, how high have you have that kit?

Maurise · Jul 11, 2020

that memory bench in safe mode vs normal lol. too much backround apps i guess.

Arctucas · Jul 11, 2020

Maurise said:
View attachment 161900 that memory bench in safe mode vs normal lol. too much backround apps i guess.

Nice!

I thought I had a screenshot, bit I cannot find it. Anyway, here is what I got out of my current kit (see the Memory section). Do not have all the timings, but IIRC 19-19-19-39 @ 1.6V.

EVGA Z390 DARK Performance Results - UserBenchmark

mouacyk · Jul 11, 2020

Arctucas said:
Nice overclock, how high have you have that kit?

Ran it forever at 4000-16-17-17-36-1T@1.425v /w 1.15v IO/SA. Can sometimes boot at 4266-17-18-18-36-2T@1.45v /w 1.25v IO/SA and tested for about 15 minutes in RAM Test for about 1000% coverage, but reboots don't always post. I know my mobo has done 4266 at that speed and timing before on an 8700K and 3600C16 kit, so it's likely flaking out with my 9900K. I've tried 1.5v+ and up to 1.4v on IO/SA for 4266+, but nothing boots.

The 4133-16-17-17-36-2T profile is achieved at 1.45v /w 1.2 IO/SA and passed 1200% coverage in HCI MemTest Pro. 2T didn't penalize it too bad; -0.4ns latency and +2GB/s copy. My board doesn't have any RTL IO-L controls, but performance could be better if they could be tweaked somehow:

atc-evga-z370-micro-4133-16-17-17-36-2T-1.45v.png

RealNeil · Jul 11, 2020

i9-9900K box
At stock speeds with a 5.2GHz. boost when it needs to.
I like it.

mrthanhnguyen · Jul 12, 2020

2x16gb B-die 4000 cl19

mouacyk · Jul 13, 2020

mrthanhnguyen said:
2x16gb B-die 4000 cl19

With the frequency and timings, I'dlike to see < 38ns latency. Do you have a lot of background apps running?

Processor	AMD Ryzen 7 5700G
Motherboard	ASUS A520M-K
Cooling	Scythe Kotetsu Mark II
Memory	2 x 16GB SK Hynix OEM DDR4-3200 @ 3666 18-20-18-36
Video Card(s)	Colorful RTX 2060 SUPER 8GB GDDR6
Storage	250GB WD BLACK SN750 M.2 + 4TB WD Red Plus + 4TB WD Purple
Display(s)	AOpen 27HC5R 27" 1080p 165Hz
Case	COUGAR MX440 Mesh RGB
Audio Device(s)	Creative X-Fi Titanium HD + Kurtzweil KS-40A bookshelf
Power Supply	Corsair CX750M
Mouse	Razer Deathadder Essential
Keyboard	Cougar Attack2 Cherry MX Black
Software	Windows 10 Pro x64

System Name	Ryzen experimental tuf build
Processor	3700x
Motherboard	x370 crosshair VI hero
Cooling	cooler master aio
Memory	teamgroup 16 gb ddr4 3200 mhz
Video Card(s)	msi gtx 1060 oc 2100 core 9000 mhz memory
Storage	120 gb ssd 120gb nvme 3tb hdd
Display(s)	19in dell
Case	fractal desing node 804
Audio Device(s)	intergraded
Power Supply	seasonic 750fm focus gold
Mouse	logitech m320
Keyboard	corsair k65 rgb rapidfire
Software	win 10 pro,kaspersky total,primo cache and others
Benchmark Scores	cinebench r20 495 single core 4702 multithread cpu z single core 525 multicore 5484.6

System Name	Cumquat 2021
Processor	AMD RyZen R7 7800X3D
Motherboard	Asus Strix X670E - E Gaming WIFI
Cooling	Deep Cool LT720 + CM MasterGel Pro TP + Lian Li Uni Fan V2
Memory	32GB GSkill Trident Z5 Neo 6000
Video Card(s)	Sapphire Nitro+ OC RX6800 16GB DDR6 2270Cclk / 2010Mclk
Storage	1x Adata SX8200PRO NVMe 1TB gen3 x4 1X Samsung 980 Pro NVMe Gen 4 x4 1TB, 12TB of HDD Storage
Display(s)	AOC 24G2 IPS 144Hz FreeSync Premium 1920x1080p
Case	Lian Li O11D XL ROG edition
Audio Device(s)	RX6800 via HDMI + Pioneer VSX-531 amp Technics 100W 5.1 Speaker set
Power Supply	EVGA 1000W G5 Gold
Mouse	Logitech G502 Proteus Core Wired
Keyboard	Logitech G915 Wireless
Software	Windows 11 X64 PRO (build 23H2)
Benchmark Scores	it sucks even more less now ;)

System Name	Purple rain
Processor	10.5 thousand 4.2G 1.1v
Motherboard	Zee 490 Aorus Elite
Cooling	Noctua D15S
Memory	16GB 4133 CL16-16-16-31 Viper Steel
Video Card(s)	RTX 2070 Super Gaming X Trio
Storage	SU900 128,8200Pro 1TB,850 Pro 512+256+256,860 Evo 500,XPG950 480, Skyhawk 2TB
Display(s)	Acer XB241YU+Dell S2716DG
Case	P600S Silent w. Alpenfohn wing boost 3 ARGBT+ fans
Audio Device(s)	K612 Pro w. FiiO E10k DAC,W830BT wireless
Power Supply	Superflower Leadex Gold 850W
Mouse	G903 lightspeed+powerplay,G403 wireless + Steelseries DeX + Roccat rest
Keyboard	HyperX Alloy SilverSpeed (w.HyperX wrist rest),Razer Deathstalker
Software	Windows 10
Benchmark Scores	A LOT

Processor	Intel Core i9 11900KF @ -075mV PL max @225w
Motherboard	MSI MAG Z490 TOMAHAWK
Cooling	DeepCool LS520SE Liquid + 3 Phanteks 140mm case fans
Memory	32GB (4 x 8GB SR) Patriot Viper DDR4 @ 3600Mhz CL14 1.45v Gear 1
Video Card(s)	Asus Dual RTX 4070 OC
Storage	WD Blue SN550 1TB M.2 NVME//Crucial MX500 500GB SSD (OS)
Display(s)	AOC Q2781PQ 27 inch Ultra Slim 2560 x 1440 IPS
Case	Phanteks Enthoo Pro M Windowed - Gunmetal
Audio Device(s)	Onboard Realtek ALC1200/SPDIF to Sony AVR @ 5.1
Power Supply	Seasonic CORE GM650w Gold Semi modular
Mouse	Coolermaster Storm Octane wired
Keyboard	Element Gaming Carbon Mk2 Tournament Mech
Software	Win 10 Home x64

Share your AIDA 64 cache and memory benchmark here

Apocalypsee

nico_80)

Attachments

Athlonite

cucker tarlson

Tatty_Two

Gone Fishing

cucker tarlson

Tatty_Two

Gone Fishing

cucker tarlson

Tatty_Two

Gone Fishing

cucker tarlson

Sir_Crystal

cucker tarlson

Arctucas

Rock N Roll Rebel

Sir_Crystal

mouacyk

Arctucas

mouacyk

Arctucas

Maurise

New Member

Arctucas

mouacyk

RealNeil

mrthanhnguyen

mouacyk

System Name	It's just a computer
Processor	i9-14900K Direct Die
Motherboard	MSI Z790 ACE MAX
Cooling	Dual D5T Vario, XSPC BayRes, 2X Nemesis GTR560, NF-A14-iPPC3000PWM, NF-A14-iPPC2000, IceMan DD block
Memory	TEAMGROUP FFXD548G8000HC38EDC01
Video Card(s)	MSI 4070 Ti Super w/Alphacool Eisblock Aurora RTX 4070TI Ventus with Backplate :13724
Storage	Samsung 990 PRO 1TB M.2
Display(s)	LG 32GK650F
Case	Thermaltake Xaser VI
Audio Device(s)	Auzentech X-Meridian 7.1 2G/Z-5500
Power Supply	Seasonic Prime PX-1300
Mouse	Logitech
Keyboard	Logitech
Software	Win11PRO

System Name	ROG MACHINE
Processor	Ryzen 9 5950x
Motherboard	Crosshair viii Hero
Cooling	NZXT Kraken Z 73 my corsair H115i kicked the bucket corsair sucks lol
Memory	g-skill rgb 64gb 4x16gb ddr4 3200mgz
Video Card(s)	MSI Ventus 3x oc 3080
Storage	Sabren rocket gen 4 2tb m.2/ samsung 960 evo 1tb m.2/ 3x toshiba 3tb hdd , 10tb seagate, 16tb seagat
Display(s)	Acer 4k monitor/ Samsung C34J79x 34 inch curved monitor
Case	thermal take view 71 rgb
Audio Device(s)	creative ae-5 sound card
Power Supply	corsair AX 1200i 1200 watt psu
Mouse	ROG CHAKRAM
Keyboard	corsair k95
Software	windows 11 pro 64bit

System Name	Gentoo64 /w Cold Coffee
Processor	9900K 5.2GHz @1.312v
Motherboard	MXI APEX
Cooling	Raystorm Pro + 1260mm Super Nova
Memory	2x16GB TridentZ 4000-14-14-28-2T @1.6v
Video Card(s)	RTX 4090 LiquidX Barrow 3015MHz @1.1v
Storage	660P 1TB, 860 QVO 2TB
Display(s)	LG C1 + Predator XB1 QHD
Case	Open Benchtable V2
Audio Device(s)	SB X-Fi
Power Supply	MSI A1000G
Mouse	G502
Keyboard	G815
Software	Gentoo/Windows 10
Benchmark Scores	Always only ever very fast

System Name	Home Brewed
Processor	i9-7900X and i7-8700K
Motherboard	ASUS ROG Rampage VI Extreme & ASUS Prime Z-370 A
Cooling	Corsair 280mm AIO & Thermaltake Water 3.0
Memory	64GB DDR4-3000 GSKill RipJaws-V & 32GB DDR4-3466 GEIL Potenza
Video Card(s)	2X-GTX-1080 SLI & 2 GTX-1070Ti 8GB G1 Gaming in SLI
Storage	Both have 2TB HDDs for storage, 480GB SSDs for OS, and 240GB SSDs for Steam Games
Display(s)	ACER 28" B286HK 4K & Samsung 32" 1080P
Case	NZXT Source 540 & Rosewill Rise Chassis
Audio Device(s)	onboard
Power Supply	Corsair RM1000 & Corsair RM850
Mouse	Generic
Keyboard	Razer Blackwidow Tournament & Corsair K90
Software	Win-10 Professional
Benchmark Scores	yes

Processor	Intel core i9 13900ks sp117 direct die
Motherboard	Asus Maximus Apex Z790
Cooling	Custom loop 3*360 45mm thick+ 3 x mo-ra3 420 +Dual D5 pump and dual ddc pump
Memory	2x24gb Gskill 8800c38
Video Card(s)	Asus RTX 4090 Strix
Storage	1TB Samsung 860Evo,2*2tb Samsung 970Evo Plus, 1tb Intel 660p nvme
Display(s)	Sammsung G7 32”
Case	Dynamic XL
Audio Device(s)	Creative Omni 5.1 usb sound card
Power Supply	Corsair AX1600i
Mouse	Model O-
Keyboard	Hyper X Alloy Origin Core