The AMD Phenom II OC'ers Club

exodusprime1337 · Jan 29, 2009

well here is where i am at this point. i'm super excited. i'm gonna keep pushing it. just hit 17k in 3dmark06 with my 8800's and no sli bridge and no oc

turns out the 8 pin needed to be plugged in, my 4 pin reaches and 2 had a blank plug in them so i thought it was ok, but once i put the 8 pin in... cha ching!!!! I'll keep ya guys update on my progress.

PaulieG · Jan 29, 2009

My new board. I'll be switching stuff out tonight, and I'll post some pics.

http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=10010003

exodusprime1337 · Jan 29, 2009

nice, i just hit 3.8Ghz bench stable, havne't crashed yet. how much further you think i should push it? i'm at 1.465v at 3.817Ghz.

also what should i be pushing my chipset too... like i don't know what multiplier or v to use??

currently i'm just running 200x19. gonna try for 4ghz, if i'm lucky i'll get a screen for you guys.

PaulieG · Jan 29, 2009

exodusprime1337 said:
nice, i just hit 3.8Ghz bench stable, havne't crashed yet. how much further you think i should push it? i'm at 1.465v at 3.817Ghz.

also what should i be pushing my chipset too... like i don't know what multiplier or v to use??

currently i'm just running 200x19. gonna try for 4ghz, if i'm lucky i'll get a screen for you guys.

See if you can get it OCCT at that speed. If you are OCCT stable, then it's worth pushing more. You can take that chip up to 1.55v. Do you have screenies?

servermonkey · Jan 29, 2009

Paulieg said:
My new board. I'll be switching stuff out tonight, and I'll post some pics.

http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=10010003

oooooo
will be looking foward to those

cdawall · Jan 29, 2009

exodusprime1337 said:
well here is where i am at this point. i'm super excited. i'm gonna keep pushing it. just hit 17k in 3dmark06 with my 8800's and no sli bridge and no oc

turns out the 8 pin needed to be plugged in, my 4 pin reaches and 2 had a blank plug in them so i thought it was ok, but once i put the 8 pin in... cha ching!!!! I'll keep ya guys update on my progress.

i score 16K with a single 8800GTS?

Castiel · Jan 29, 2009

Paulieg said:
My new board. I'll be switching stuff out tonight, and I'll post some pics.

http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=10010003

I want to see. Is it AM3 ready?

ShadowFold · Jan 29, 2009

Castiel said:
I want to see. Is it AM3 ready?

Of course! Any 790 series chipset will do Phenom II's, the only TRUE AM3 boards are DDR3, but the 945, 950 etc have DDR2/DDR3 controllers so they work with both. A 940 or 920 will not do DDR3 tho.

Castiel · Jan 29, 2009

ShadowFold said:
Of course! Any 790 series chipset will do Phenom II's, the only TRUE AM3 boards are DDR3, but the 945, 950 etc have DDR2/DDR3 controllers so they work with both. A 940 or 920 will not do DDR3 tho.

Oh hell on earth. I really hate AMD right now.

exodusprime1337 · Jan 29, 2009

cdawall said:
i score 16K with a single 8800GTS?

what is you're nb and htt link at? i thought i was getting a good score, lol. i don't know what if anything could be holding me back.

cdawall · Jan 29, 2009

exodusprime1337 said:
what is you're nb and htt link at? i thought i was getting a good score, lol. i don't know what if anything could be holding me back.

pretty untweaked for that score

exodusprime1337 · Jan 29, 2009

what voltage and multii i need to get that nb frequency? right now i'm just at 2000?

you're cpu score is about 400 larger then mine.

cdawall · Jan 29, 2009

exodusprime1337 said:
what voltage and multii i need to get that nb frequency? right now i'm just at 2000?

you're cpu score is about 400 larger then mine.

my cpu score is actually pretty low for that speed its the wonderful NV drivers ati gets ~400pts more same clocks. cpu is @1.55v and NB multi is @14x

again this is untweaked ill rerun it later with the NB@3ghz and cpu clocked higher with DDR1250

exodusprime1337 · Jan 29, 2009

what about nb v?

cdawall · Jan 29, 2009

exodusprime1337 said:
what about nb v?

1.36v

exodusprime1337 · Jan 29, 2009

So here are some benchies, i'll throw up more as i think em up. figured i'd show ya'll how a mid range nvidia board works out.

also just a bit about the cooling used. Currently this chip is still clothed, i'll get the ihs off sooner or later but i'm using an ultra120 extreme and panaflo fan inside an antec 1200 to cool everything.

and here are the complete specs

Amd Phenom II 940 black edition 200x19 @ 1.47V
Asus M3N-HT Deluxe
2x1 Gig patriot ddr2 1150 5,5,5,15 @ 2.1V (speed now is at 1066Mhz)
2x eVGA 8800gts 512 @ 800/1920/2150
bfg ES 800watt
g.skill 64Gb ssd
2x 7200.11 320 gig sata 2 barracuda.

here is the 3dmark06 link: 18k 3dmark

cdawall · Jan 29, 2009

is your board 750a or 780a?

exodusprime1337 · Jan 29, 2009

780a

btw cd, many thanx to you, you were not only my inspiration in getting an nvidia board, all of you're posts on your build throughout the forums have been an immense help in me getting this going. thank you so much. please point out anything else you think i should work on that could be fixed.

cdawall · Jan 30, 2009

exodusprime1337 said:
780a

btw cd, many thanx to you, you were not only my inspiration in getting an nvidia board, all of you're posts on your build throughout the forums have been an immense help in me getting this going. thank you so much. please point out anything else you think i should work on that could be fixed.

780a likes pushing the bus and your HT can go alot higher

try some settings like that

cpu is @1.6v though mine is a way early stepping yours will not need anywhere near that voltage

exodusprime1337 · Jan 30, 2009

i'll try posting that, as far as memory, how to i get something that keeps the memory around 1150? i can 237 should i force the memory to ddr2 800 so that it scales better with a half multi?

cdawall · Jan 30, 2009

exodusprime1337 said:
i'll try posting that, as far as memory, how to i get something that keeps the memory around 1150? i can 237 should i force the memory to ddr2 800 so that it scales better with a half multi?

try 220x18 that puts the ram@1173

and full or half multi mkaes no difference ram is running 3:8 for 1066 and 2:1 for DDR800

exodusprime1337 · Jan 30, 2009

nice thank you, yeah i'm tring to do that, and i keep getting bsod's. i'm 200x19 again, the performance is incredible compared to my old proccy.

so if i do 220x18 what should i set the memory at 800 or 1066?

cdawall · Jan 30, 2009

exodusprime1337 said:
nice thank you, yeah i'm tring to do that, and i keep getting bsod's. i'm 200x19 again, the performance is incredible compared to my old proccy.

so if i do 220x18 what should i set the memory at 800 or 1066?

1066mhz mkae sure you give the cpu enough volts and bump HT to 1.34v

exodusprime1337 · Jan 30, 2009

will do, i'll post back in a sec

cdawall · Jan 30, 2009

System Name	HOMECOMPUTER
Processor	Intel i9 - 9900k @ 5.1Ghz - 1.31v
Motherboard	Asux ROG Maximus XI Hero Wifi
Cooling	ek supremacy evo full nickle, 2xEK 360 Radiators, ek d5 pump/res combo, ek full cover 2080ti block
Memory	16GB DDR 3600 Trident Z RGB
Video Card(s)	Gigabyte RTX 2080TI
Storage	1xWD black NVME 500GB, 1xSamsung 970 Evo Plus NVME 1TB
Display(s)	2 Dell Gaming 27" 1440P Gsync
Case	Lian LI PC-011 Dynamic
Audio Device(s)	onboard
Power Supply	Evga P2 1200Watt
Mouse	Zowie FK1+
Keyboard	Corsair Strafe rgb silent
Software	Windows 10 Pro
Benchmark Scores	i'm working on that

Processor	5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard	MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling	EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory	32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s)	Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage	Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s)	Acer 1080p 22"/ (3) Samsung 22" 1080p
Case	(2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply	EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse	Generic Black wireless (5)
Keyboard	Generic Black wireless (5)
Software	Win 10/Ubuntu

System Name	HOMECOMPUTER
Processor	Intel i9 - 9900k @ 5.1Ghz - 1.31v
Motherboard	Asux ROG Maximus XI Hero Wifi
Cooling	ek supremacy evo full nickle, 2xEK 360 Radiators, ek d5 pump/res combo, ek full cover 2080ti block
Memory	16GB DDR 3600 Trident Z RGB
Video Card(s)	Gigabyte RTX 2080TI
Storage	1xWD black NVME 500GB, 1xSamsung 970 Evo Plus NVME 1TB
Display(s)	2 Dell Gaming 27" 1440P Gsync
Case	Lian LI PC-011 Dynamic
Audio Device(s)	onboard
Power Supply	Evga P2 1200Watt
Mouse	Zowie FK1+
Keyboard	Corsair Strafe rgb silent
Software	Windows 10 Pro
Benchmark Scores	i'm working on that

Processor	5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard	MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling	EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory	32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s)	Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage	Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s)	Acer 1080p 22"/ (3) Samsung 22" 1080p
Case	(2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply	EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse	Generic Black wireless (5)
Keyboard	Generic Black wireless (5)
Software	Win 10/Ubuntu

System Name	mcp
Processor	amd phenom II 940 @ 3842
Motherboard	asus m3a79-T dlx
Cooling	coolit boreas
Memory	2x2gb corsair xms
Video Card(s)	2x hd3870s
Storage	wdc 150gb raptor
Case	silverstone tj07
Audio Device(s)	xfi pro
Power Supply	coolmax 1100w + visiontek 450w (for the boreas)
Benchmark Scores	19778 3dmark http://service.futuremark.com/compare?3dm06=9709800

The AMD Phenom II OC'ers Club

exodusprime1337

PaulieG

exodusprime1337

PaulieG

servermonkey

New Member

cdawall

where the hell are my stars

Castiel

ShadowFold

New Member

Castiel

exodusprime1337

cdawall

where the hell are my stars

exodusprime1337

cdawall

where the hell are my stars

exodusprime1337

cdawall

where the hell are my stars

exodusprime1337

cdawall

where the hell are my stars

exodusprime1337

cdawall

where the hell are my stars

exodusprime1337

cdawall

where the hell are my stars

exodusprime1337

cdawall

where the hell are my stars

exodusprime1337

cdawall

where the hell are my stars

System Name	Moving into the mobile space
Processor	7940HS
Motherboard	HP trash
Cooling	HP trash
Memory	2x8GB
Video Card(s)	4070 mobile
Storage	512GB+2TB NVME
Display(s)	some 165hz thing that isn't as nice as it sounded

Processor	Intel i5-3570K @ 3.4Ghz
Motherboard	Asrock LGA1155 Z77 Extreme 4
Cooling	Cooler Master Evo 212
Memory	16GB (4X4) G.Skill Ripjaw 2 DDR3-1600
Video Card(s)	Nvidia gForce GTX 660ti
Storage	1x Samsung 840 EVO 256GB 6Gb/s, 1x WD 500GB 6Gb/s, 1x WD 80GB 3Gb/s
Display(s)	ASUS VH242H Black + 2 HP 2311x 23" LED
Case	Fractal Design R4
Audio Device(s)	Realtek OnBoard Both
Power Supply	Cooler Master 850w
Software	Windows 7 Ultimate 64-bit SP1

System Name	The ShadowFold Draconis (Ordering soon)
Processor	AMD Phenom II X6 1055T 2.8ghz
Motherboard	ASUS M4A87TD EVO AM3 AMD 870
Cooling	Stock
Memory	Kingston ValueRAM 4GB DDR3-1333
Video Card(s)	XFX ATi Radeon HD 5850 1gb
Storage	Western Digital 640gb
Display(s)	Acer 21.5" 5ms Full HD 1920x1080P
Case	Antec Nine-Hundred
Audio Device(s)	Onboard + Creative "Fatal1ty" Headset
Power Supply	Antec Earthwatts 650w
Software	Windows 7 Home Premium 64bit
Benchmark Scores	-❶-❸-❸-❼-