The AMD Phenom II OC'ers Club

[Irony]

Oh ok cools.

Those are really good volts. Temps as well. Is it stable?

 

[cdawall]

Oh ok cools.

Those are really good volts. Temps as well. Is it stable?

It just finished the GPU and CPU Benchmark 99 times each on Crysis. Temps never broke 40C...Voltage on CPUz is wrong it is 1.525v bios 1.531v real.

 

[Norton]

@ cdawall

Neat idea with the fans

Now I have a reason to hang onto the dead ones

 

[Irony]

Oh okay. still an Awesome temp.

 

[eidairaman1]

Heck that CPU beats up on most Bulldozers

 

[cdawall]

@ cdawall

Neat idea with the fans

Now I have a reason to hang onto the dead ones

Yup and with the fancy BIOS saves I can set the noisy as hell 255 CFM fan's to 7v and CPU to 3.5ghz and its silent and still runs cool.

Oh okay. still an Awesome temp.

Thanks can't wait to put it on my real water cooling.

Heck that CPU beats up on most Bulldozers

I would hope so good $65 chip

 

[eidairaman1]

Gaming Wise Yes because the 980 which was at 3.7GHz stock is leagues higher than the BD 41** series

Yup and with the fancy BIOS saves I can set the noisy as hell 255 CFM fan's to 7v and CPU to 3.5ghz and its silent and still runs cool.



Thanks can't wait to put it on my real water cooling.



I would hope so good $65 chip

 

[YautjaLord]

It's probably not the place for it, since it'll be bout RAM, but: once got hold of PD/FX-8350 (in case & it performs real well too) how to OC it (RAM) from 1333MHz to - say - 1866MHz? Gonna buy 2x8GB G.Skill DDR3 1333MHz sticks today. Thanx alot.

 

[cdawall]

8gb sticks will be rough on the memory controller...

 

[YautjaLord]

Of Phenom II's mem controller? I'll play with that stuff somehow. How are you doin' cdawall? Anything on a 1333MHz to 1866MHz OC'ing subject?

P.S. It's 2x8GB not 2x4GB sticks, meaning 16 not 8GB. Keep headbanging.

 

[cdawall]

On any memory controller Phenom II, BD, PD doesn't matter.

 

[YautjaLord]

Had to open the case briefly to press that MemOK! button; after that reads (& runs) fine. Lowered the CPU OC though: from 200x20.5 down to 200x20; everything else (voltages, frequencies, etc.) the same, 'cept RAM voltage - 1.5v. Thanx regardless cd, much appreciated; time to update sys specs.

*EDIT*

The CPU-Z 1.61:

 

[StanMen]

Hey guys i have one quastion i today get my EVGA GTX 480 1.5Gb GDDR5 and i have last ver of BIOS on my mobo and i also running last Drivers for vga is 301 and my PSU is 620W, so the thing is wen i open my GPU-Z i saw that my pci-e bus was 1.1 x16 is idle then i open 3D progs like games and bench like ungine haven and i saw that my bus was pci-e 2.0 x16 @ 2.0 x16 like it should be so this is normal ? some guys in BtLog told me that this is normal and my friend also told me that is normal and you guys ? pls help !!

 

[cdawall]

Power saving feature on the mobo/windows...

 

[StanMen]

Power saving feature on the mobo/windows...

so this is normal right ? caus many told me yes and i know here u guys have more expirence with this things

 

[cdawall]

Yes

 

[Black Flag]

Asus Crosshair V Formula
Phenom II 1090t
Kingston 16GB Dominator T2 DDR3 2133 MHz

Running at :

4.0 GHz at 1.46875 V
NB Frequency 3.0 GHz at 1.40 V
Memory Frequency 2000 MHz at 1.65 V
NB Voltage at 1.2 V
SB Voltage at 1.19 V

CNQ Enabled.

Are my voltages too high?

 

[eidairaman1]

Asus Crosshair V Formula
Phenom II 1090t
Kingston 16GB Dominator T2 DDR3 2133 MHz

Running at :

4.0 GHz at 1.46875 V
NB Frequency 3.0 GHz at 1.40 V
Memory Frequency 2000 MHz at 1.65 V
NB Voltage at 1.2 V
SB Voltage at 1.19 V

CNQ Enabled.

Are my voltages too high?

No Youre within the VCore Range of Normal Turbo Mode for that CPU. Did you happen to adjust the multiplier at all? By the Way Check your Ram, Is it Corsair Dominator or Kingston Predator?

http://www.cpu-world.com/CPUs/K10/A... Edition - HDT90ZFBK6DGR (HDT90ZFBGRBOX).html

 

[Black Flag]

Sorry my mistake, is Kingston Predator T2 the new released model. I use 1.65 v instead of 1.6 v because it's the only way for the sleeping mode to be functional.

FSB Bus is set to 250 MHz. System is stable at Blend test for 3:30 hours at Prime95.

CPU/NB voltage is high? or the SB and NB voltages?

 

[eidairaman1]

Did you adjust those at all?

Sorry my mistake, is Kingston Predator T2 the new released model. I use 1.65 v instead of 1.6 v because it's the only way for the sleeping mode to be functional.

FSB Bus is set to 250 MHz. System is stable at Blend test for 3:30 hours at Prime95.

CPU/NB voltage is high? or the SB and NB voltages?

 

[Black Flag]

Yes SB and NB voltages from 1.10 to the values I mention. CPU/NB Voltage when is set to default frequency of 2000 MHz is set at 1.25 V.

 

[cdawall]

I see nothing wrong with that setup.

 

[eidairaman1]

if its default at 1.25 for the NB at 2000 and youre running it at 3000, id set it to default voltage of 1.25 just to be on safe side

 

[anoobarak]

And then the system randomly started to crash windows explorer manager service (or something like that). After a short while I couldn't boot into windows. Any suggestions what might have happened? Played with higher voltages, lowered the frequency, still crashing.

 

[Irony]

Did you figure it out yet? I would say try lowering nb frequency, or ram frequency.