The ultimate way to mod your RX460-590 cards & newer (GUIDE) + consulting with all kinds of rig issues

[MacDe]

Hello everyone,

I have a problem with my 590 Nitro + with Hynix memory. My thoughts are, that you, with your experience about this graphics card, can help me to solve my problem.

I just can't get over 21 Mhs with Phoenix Miner, I don't know why. I copied the straps from 1750 to 2000 and flashed the BIOS to the silent side and applied overclock settings (cc 1250, mem 2150, vdd/vddci 950) but still this didn't help. I just can't find a 590 (hynix) BIOS mod for mining. I was considering to flash a 580 Nitro + mining BIOS but I am not sure whether this would brick my card. Can you please share your experience with me about how to configure my card to archive better results? Or could maybe someone provide a modded BIOS for my card?

Thank you very much in advance for your answer.

Best regards

MacDe

 

[priedo]

Hello everyone, how are you? First of all I would like to thank you for being available to help us, your post has arrived in Brazil, Bro hahaha. I would like your help to perform a bios mode on my asrock 570 8gb. I am currently having 29 mh/s. But I am not very satisfied with her consumption, could you help me, please?

 

[Freshbrewed]

Hello everyone,

I have a problem with my 590 Nitro + with Hynix memory. My thoughts are, that you, with your experience about this graphics card, can help me to solve my problem.

I just can't get over 21 Mhs with Phoenix Miner, I don't know why. I copied the straps from 1750 to 2000 and flashed the BIOS to the silent side and applied overclock settings (cc 1250, mem 2150, vdd/vddci 950) but still this didn't help. I just can't find a 590 (hynix) BIOS mod for mining. I was considering to flash a 580 Nitro + mining BIOS but I am not sure whether this would brick my card. Can you please share your experience with me about how to configure my card to archive better results? Or could maybe someone provide a modded BIOS for my card?

Thank you very much in advance for your answer.

Best regards

MacDe

I think you didn't enable compute mode in your AMD Driver settings. Enable it.

Hello everyone, how are you? First of all I would like to thank you for being available to help us, your post has arrived in Brazil, Bro hahaha. I would like your help to perform a bios mode on my asrock 570 8gb. I am currently having 29 mh/s. But I am not very satisfied with her consumption, could you help me, please?

Your card is gucci. I've updated my thread so if you wish to push your card further, take a look at what you can do with it!

 

[MacDe]

Hello Freshbrewed,

thank you for your answer and for taking care about my issue.

I am using HiveOs, which is Linux based, I don't think that compute mode is available there. I am also running a 570 MSI (27Mhs) and a 580 MSI (30 Mhs) without issues. I was able to adjust my card a bit due to a post I found. With core 1130 VDD 950 VDDCI 950 MEM 2000 the card archives 25 Mhs @90 Watts, which is better but still not what I expect of a Rx 590. Could you please give me some advise on how to tune the settings?

Thank you very much in advance.

 

[Freshbrewed]

Hello Freshbrewed,

thank you for your answer and for taking care about my issue.

I am using HiveOs, which is Linux based, I don't think that compute mode is available there. I am also running a 570 MSI (27Mhs) and a 580 MSI (30 Mhs) without issues. I was able to adjust my card a bit due to a post I found. With core 1130 VDD 950 VDDCI 950 MEM 2000 the card archives 25 Mhs @90 Watts, which is better but still not what I expect of a Rx 590. Could you please give me some advise on how to tune the settings?

Thank you very much in advance.

You can attach zipped rom in here so I can mod timings on PolarisEditor if you are unable to use it - might help.

 

[MacDe]

Great idea. Here is my rom.

I thought, that the 580 is almost the same as the 590 but there are more straps in the 580 bios (msi) than in the 590 bios (sapphire).

 

[Freshbrewed]

Try this out mate, only the straps are modified. Set voltage and clocks at your best capabilities.

 

[MacDe]

Excellent work, mate. Where did you learn that? My card is running at 30.1 Mhs now in HiveOs with these settings:

CORE 1200 VDD 950 VDDCI 950 MEM 2100

Thank you very much.

 

[Freshbrewed]

Happy to hear that! It's not rocket science, you could totally do it yourself. Thank the one who created PolarisEditor

 

[nono55]

Hi FreshBrewed,

I currently have Rx570's MSI Gaming X 4GB plugged on PCI-e16x slot with RaveOS in Zombie mode, my current hashrate is 15Mh/s, but I saw it is possible to have better (approx 25Mh/s). Could you check my BIOS ROM (already bios modded so nos stock bios) to see if it possible to increase perf ? It would be very appreciated ;-)

Thanks

 

[MacDe]

Hello FreshBrewed,

I have a real problem and I hope you can help me out.

I just flashed a BIOS mod on my ASUS rog strix 5700XT and after that just a few seconds in Phoenixminer my GPU Temp rises up to over 110° shutting down my PC. I reverted the BIOS by flashing the stock BIOS to the silent and the turbo side but this doesn't revert the temperature error. This is crazy and I really don't know what to do. What can I do to revert this error? Please help me.

 

[TommyB]

Searched for this thread earlier and couldn't find it for some reason?

Anyhow, I am mining using nicehash with an RX 5600 XT, my bios is uploaded below, I have lowered the GPU clock to 1280mhz, gpu voltage 0.868, vram is 1820mhz and GPU chip power consumption is 107w, only done through AMD drivers, wondering if you might be able to extract a bit more hash rate/lower power with a bios mod is possible!

 

[Freshbrewed]

Hi FreshBrewed,

I currently have Rx570's MSI Gaming X 4GB plugged on PCI-e16x slot with RaveOS in Zombie mode, my current hashrate is 15Mh/s, but I saw it is possible to have better (approx 25Mh/s). Could you check my BIOS ROM (already bios modded so nos stock bios) to see if it possible to increase perf ? It would be very appreciated ;-)

Thanks

Attached rom with tightened straps and a mild overclock on memory. If your card will crash, just revert memory clock as it was before in the rom you provided. Post me the results.

Hello FreshBrewed,

I have a real problem and I hope you can help me out.

I just flashed a BIOS mod on my ASUS rog strix 5700XT and after that just a few seconds in Phoenixminer my GPU Temp rises up to over 110° shutting down my PC. I reverted the BIOS by flashing the stock BIOS to the silent and the turbo side but this doesn't revert the temperature error. This is crazy and I really don't know what to do. What can I do to revert this error? Please help me.

Can you elaborate your case more or did you solve the problem? How is the error coming up, what are all the steps you did to try to fix it?

Searched for this thread earlier and couldn't find it for some reason?

Anyhow, I am mining using nicehash with an RX 5600 XT, my bios is uploaded below, I have lowered the GPU clock to 1280mhz, gpu voltage 0.868, vram is 1820mhz and GPU chip power consumption is 107w, only done through AMD drivers, wondering if you might be able to extract a bit more hash rate/lower power with a bios mod is possible!

Attached rom with my custom straps for the memory and I've unlocked lower voltages (700mV is the new minimum now along with 1820 maximum core clock). Post me your results!

 

[TommyB]

Attached rom with tightened straps and a mild overclock on memory. If your card will crash, just revert memory clock as it was before in the rom you provided. Post me the results.

Can you elaborate your case more or did you solve the problem? How is the error coming up, what are all the steps you did to try to fix it?

Attached rom with my custom straps for the memory and I've unlocked lower voltages (700mV is the new minimum now along with 1820 maximum core clock). Post me your results!

Thanks man, I'll give it a try and let you know how I get on, though I already have up to 1820 on the core available in AMD overdrive, not that it matters as after 1400 or so the core clock doesn't seem to make that much of a difference to hashrate together with the increased power usage afaik?

 

[nono55]

Attached rom with tightened straps and a mild overclock on memory. If your card will crash, just revert memory clock as it was before in the rom you provided. Post me the results.

A big thanks to you !! Works perfect and better than previously !!

 

[Freshbrewed]

I'm glad to hear that.

 

[newminer]

Hello guys
@Freshbrewed you are the man i'm looking for .. i have been looking for someone who can help me bios mod my amd cards as the performance isn't that great i'm getting 26.6 on my armor 570 OC 8gb but i have seen ppl hit 30 easy i tried oneclick bios mod but didn't see much difference i will attach my original bios and maybe you can help me out with this one , i also have a similar card with different memory so will see if you can fix this one for me as well .. thanks in advance

 

[atifsh]

Hello guys
@Freshbrewed you are the man i'm looking for .. i have been looking for someone who can help me bios mod my amd cards as the performance isn't that great i'm getting 26.6 on my armor 570 OC 8gb but i have seen ppl hit 30 easy i tried oneclick bios mod but didn't see much difference i will attach my original bios and maybe you can help me out with this one , i also have a similar card with different memory so will see if you can fix this one for me as well .. thanks in advance

oneclick will give you 2 option .. slower will give you higher mclock. see which one suits you more.
depending on what you are using to mine, that card should go beyond 30 MH easy.

 

[MacDe]

Hello Freshbrewed,

thank you very much for your help.

I sent the Card back to where I bought it from and they did reset the card somehow. Now everything ist fine.

I recently bought a Vega 56 Asus rog strix and I can't run it using a 1x Riser, which seems to be a known issue. In a 8x slot it works fine. Do you know something about this issue, whether there is a fix for it?

Thank you in advance for your answer.

Best regards

MacDe

 

[Gambeta]

Hi!.
I having an issue with a MSI RX 570 4GB ARMOR OC with Hynix Memory and stock bios.
The hashrate its really low, i change the mode from graphics to compute, but its still the same. On windows im having like 7/8 MH/s mining RVN - KawPow using teamredminer or NBMiner; On HiveOs 3/4 MH/s with lolminer zombie mode or 8 MH/s with KawPow using teamredminer ..

I tested it on two different pc's and i have the same problem.

I have another gpu, a gtx 1650super with Micron mining RVN 12.9/13 MH/s, no problem at all.

Hope anyone can help me with this!

 

[atifsh]

Hi!.
I having an issue with a MSI RX 570 4GB ARMOR OC with Hynix Memory and stock bios.
The hashrate its really low, i change the mode from graphics to compute, but its still the same. On windows im having like 7/8 MH/s mining RVN - KawPow using teamredminer or NBMiner; On HiveOs 3/4 MH/s with lolminer zombie mode or 8 MH/s with KawPow using teamredminer ..

I tested it on two different pc's and i have the same problem.

I have another gpu, a gtx 1650super with Micron mining RVN 12.9/13 MH/s, no problem at all.

Hope anyone can help me with this!

570's on avg should give 12 Mhs on RVN. some will be as high as 14 Mhs but need cold climate.
reset everything and if your on stock bios use wattman.
1000 core clock
875 core volt
1850 mclock
900 mvolt

see what you get with TRM

 

[JaqSeb]

@Freshbrewed Good day sir, I bought a dozen of ex-mining rig, got a few units of RX580, RX480 and RX470.
I'm sure that the rest of the components are running fine (MB, CPU, RAM, etc...) as they can work well with a working card.
I had tested all of the cards, some of them working perfectly fine after deep cleaning (I know what I'm doing and not damaging the card) and thermal pad/paste changing, but some other cards tend to flicker/glitch when I run the miner (not the problem of monitor), getting low hash rate and crash when I increase the memory clock. I will now take my Sapphire Nitro+ RX580 8gb Hynix memory as example.
I had tried flashing the bios to the original one that I found in VGA Bios Collection, also tried to one click mod it using PolarisBiosEditor. Running with core clock 1150, 850mv, memory clock starts from 1600, 850mv and slowly increasing the memory clock by 100 each increment. Compute mode is on, patched with atikmdag patcher, HWinfo64 shown no GPU memory error. The hash rate will stuck around 14-15 mh/s and it won't go beyond that range even the memory clock is at 2100. Sometimes if I try to increase the memory clock by too much in each increment (+200 for example), the rig will crash, GPU fans will run in full speed, and monitor screen goes black.
I use TeamRedMiner, GPU driver used is Adrenalin 20.11.2 which is recommended by TeamRedMiner, I use DDU to have a fresh install of driver. Idle and mining temperatures are fine.
I had tried the modded bios that you uploaded, the hash rate had increased to 17mh/s, but it still stuck there with the correct OC.
Is it possible that the card is spoiled because it was ex-mining card and that guy never clean or maintenance the rig, the card was so freaking dusty when I received it.
I hope there is some solution to my issue, I'm still new in mining and searched the internet for solution, did everything I can, but still no luck.

 

[Bsoro]

Hello Freshbrewed,

after a couple of hours searching a mining bios for my new Sapphire RX 590 I finally found this thread. I´m not new to bios modding at all, but was only really successful to Navi 10 graphic cards (5700 XT - 58mhs@112W, 5700 XTX - 54,7mhs@94W and 5600 XT - 42,4mhs@76W). For my Polaris cards I reached following: ASUS 570 - 26,7mhs@74W, Sapphire 570 - 26,4mhs@73W. I´m not happy with that at all as there are several videos and threads where this cards can do about 30-31 mhs (maybe at some higher consumption). Until now I just copy the straps or use "one-click-mod" and optimizing cclock/cvddc/mclock/mvddc. I also tried to modify the tref by editing the hex-command line. It works, but without great improvement. Today I tried to optimize my new Sapphire RX590 and reached 29mhs@75W. I´m fine with the ratio but would like to know, if there is something more in it. So if you have plenty of time and interest in modding a second RX 590 card (with micron memory) here is the rom attached. I´m very interested in your achievement!

Additionally some issues of this card: I used one-click-mod and switched to power mode bios (it has dual bios). This performed the 29mhs @ 1200 cclock, 2000 mclock (phoenixminer) cvddc=mvddc=800mV. The behavior of setting up voltages was really unusual. By setting mvddc it changes the cvddc. Never seen this before. Increasing the mclock to 2200 finally doesn´t lead to an improvement of hashrate. It was exactly the same as 2000. Also increasing the cclock simultaneously doesn´t affect the hashrate at all. Very strange.

Best greetings
Bsoro

 

[Kraider]

You can attach zipped rom in here so I can mod timings on PolarisEditor if you are unable to use it - might help.

Can you also help me, i use hiveos don't have 22mhash rx590 nitro hynics for eth . Here would be my bios if you would help me. Many Thanks

 

[Chrisisimon02]

Hey guys!
I have a 5x580 8gb asus Rig. And i run on HiveOs, I want to Bios mod, but when i flash the bodded bios on a card, the card will have 0mhs????
After I flash back the orignial BIOS it instantly works perfecty fine.

Does anyone know how to fix this issue?
I tryed everything... and I am getting really frustrated

I modded the bios with PolarisBIOS modder

I hope someone can help me
THANKS!