• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Thermaltake Introduces V9 Black Edition Mid Tower Gaming Chassis

malware

New Member
Joined
Nov 7, 2004
Messages
5,422 (0.72/day)
Location
Bulgaria
Processor Intel Core 2 Quad Q6600 G0 VID: 1.2125
Motherboard GIGABYTE GA-P35-DS3P rev.2.0
Cooling Thermalright Ultra-120 eXtreme + Noctua NF-S12 Fan
Memory 4x1 GB PQI DDR2 PC2-6400
Video Card(s) Colorful iGame Radeon HD 4890 1 GB GDDR5
Storage 2x 500 GB Seagate Barracuda 7200.11 32 MB RAID0
Display(s) BenQ G2400W 24-inch WideScreen LCD
Case Cooler Master COSMOS RC-1000 (sold), Cooler Master HAF-932 (delivered)
Audio Device(s) Creative X-Fi XtremeMusic + Logitech Z-5500 Digital THX
Power Supply Chieftec CFT-1000G-DF 1kW
Software Laptop: Lenovo 3000 N200 C2DT2310/3GB/120GB/GF7300/15.4"/Razer
Thermaltake has dropped a few lines on its home page, announcing its newest mid-tower case with an engine nomenclature. Measuring 462 (H) x 208 (W) x 485 (D) mm, the V9 Black Edition (sounds like an AMG with a supercharger) weights in 6.76kg, has a mesh design and what's more, comes with all-black powder coating including the interior. V9 Black Edition includes two 230mm (800rpm, 15dBA) fans on the side panel and on the top pushing the hot air out from the top. There are two more 120mm (1300rpm, 17dBA) turbo fans placed in front and out the back of the case, front fan also glows in red and can be replaced with a 140mm one. If you're looking for even more cooling, there's a cutout for a small 70x70x10mm fan that can be attached to the back of the motherboard. Inside the case you can put up to 4x 5.25-inch drives and up to 5x 3.5" HDDs, the PSU is bottom mounted and features a dust filter. For more details, please visit this page here. The V9 Black Edition is yet to be priced.



View at TechPowerUp Main Site
 
I have always loved the black insides of the case. The behind the mobo fan is cool too.
 
I was just going to post that Triptex but I have to say this one by Thermaltake looks much better.
 
I need to see more pictures but this case looks like a direct knock off the Antec 900.

Not entirely.

I could see a resemblence on the outside, but the major features on the inside make these completly different birds.

This has side mounted hard drives. Which in my eyes is pointless. It kills airflow to the bottom of the case, and is only good for cable management. "OMG, I can see my sata cables, the earth as we know it is coming to an end"!

This has a bigger side fan. This could be good or bad. I wish it were a bit lower to get better flow, but i'm sure its fine where it is at too.

The black inside is where Antec needs to learn. This is step one for many case modders, because it just looks better. Saves time and manhours on the consumer.

Not to bad though. Yea I can see the inspiration, but thy took the right steps to become different.
 
Yeah, I love the black inside for sure! And the fan behind the mobo is a new thing that hasnt been done very often, if at all? Im not sure. But I like it. Im no big "fan" of big FAN´s on the side door, Id rather have solid door or windowed door.
 
Im with Haze. I despise those oversized fans! Tacky Tacky Tacky! Whats wrong with 120mm?
Other than that tho it looks pretty good.
 
I'd like to see their Antec 300 rip off. That is the best midi case next to mine.
 
MMM that case would look great with that Foxcon Blood Rage board in it! :D
 
Looks kinda like the Antec 900, but I like this far more.
 
Not entirely.
This has side mounted hard drives. Which in my eyes is pointless. It kills airflow to the bottom of the case, and is only good for cable management. "OMG, I can see my sata cables, the earth as we know it is coming to an end"!

In the intrest of making cases a bit smaller they HAD to turn the Hdds sideways or large GPUs wouldnt fit.
What I dont understand is why the companies are so slow to realize that mounting the Hdds above in the DVD rack is superior. And mounting the PS below is a stupid waste of a PS fan.

The fan behind the mobo is a VERY good idea but needs to be lower, there is a lot of heat in the NB/SB area.
 
In the intrest of making cases a bit smaller they HAD to turn the Hdds sideways or large GPUs wouldnt fit.
What I dont understand is why the companies are so slow to realize that mounting the Hdds above in the DVD rack is superior. And mounting the PS below is a stupid waste of a PS fan.

The fan behind the mobo is a VERY good idea but needs to be lower, there is a lot of heat in the NB/SB area.

Agreed... I have been heavily considering buying a few things and start making my own aluminum cases because of poor engineering.. They almost all seem to be focused on appeal vs the actual functionality. :(
 
actually the prob is they are the same basic design as they were 20 years ago. And because we keep buying them they keep making the same old thing.

Making your own is a lot harder than it seems but entirely worth the effort.

(LOL, that case is an almost exact copy of the 900)
 
Yeah, I love the black inside for sure! And the fan behind the mobo is a new thing that hasnt been done very often, if at all? Im not sure. But I like it. Im no big "fan" of big FAN´s on the side door, Id rather have solid door or windowed door.

Cooler Master CM690 ring a bell, for behind the mobo cooling? Or how about the CM590? So it has been done before, and just as before Thermaltake is once again knocking off the hardwork and creativity of other companies. Seriously, this case is a knock-off of the Antec 900 and the CM590/690 design.

Thermaltake is the only accepted knock-off company that I know of.

Bryan D.
 
Wow..

It looks realy badass, but as our friend spidy says.. with great looks, comes great price.
 
Considering the price of the Thermaltake M9, this case shouldn't be priced over $100.
 
I just vomited in my mouth at the ugliness of this case. :ohwell:
 
Haven't we seen this before! ?:rolleyes:
 
I want it. The massive fans kick ass. Plus, I love black.
 
its amazing how different we all are..AMD/Intel can rile us up a bit but when it comes to cases
:nutkick::nutkick::nutkick::nutkick::nutkick:
 
one case can look different to anyone... but at the end of the day "if you don't like it, you can always mod it !!!";)
 
one case can look different to anyone... but at the end of the day "if you don't like it, you can always mod it !!!";)

So, I could mod a ford tempo if I had one? :laugh:
 
Back
Top