Unigine Heaven 4.0 Benchmark Scores Part 2

[karlgaff]

sorry took on phone.

Sapphire RX Radeon Pulse Vega 56 8GB
Intel i5 4690k 3.5GHZ

 

[russy23]

All stock speeds..should be getting a rx 570 4gb this week, should be a nice boost

 

[Smok3]

[Update] i7-950 @ 4.0GHz + RX 570 @ 1540/2250 = 1459

I've noticed that Trixx allows to add +200mv unlike Msi AB which only allows +100mv, so would it be safe to go to 1.3v to bench @1600mhz not for daily use ofc? and is there anyway to make AB able to push those 200mv like trixx?

Can u explain this please? I have 1340mhz @ 1150mV Core and 1800mhz Mem and have a slightly better score than yours?(btw this is actually an Rx 470 Sapphire Oc with an Rx 570 Nitro + bios on it)

 

[Countryside]

All setting by the book, i5-4460s @ 3.99GHz + GTX 770 @ 1136/1752 = 1075

 

[russy23]

all stock speeds..

 

[Malik Sajid]

View attachment 119771
Can u explain this please? I have 1340mhz @ 1150mV Core and 1800mhz Mem and have a slightly better score than yours?(btw this is actually an Rx 470 Sapphire Oc with an Rx 570 Nitro + bios on it)

Nice score there, mate!

I think heaven isn't optimized to benefit from multithreading, in this situation i3-6100 > i7-950 single thread performance wise and packed with some newer instructions, Also let's not overlook that these clocks +1500mhz/2250mhz are quite high for an Rx 570 within the official voltage limits, not showing off here but I'm just trying to say it maybe wasn't fully stable even if there weren't any visible artifacts.

Anyway, I don't use these clocks 24/7 it were just on for benching.

 

[delshay]

MISSING TEMPERATURE READING (AMD USERS)

I have sent a message to Unigine Support Team about the missing temperature reading & pointed them to this thread. The missing temperature readings only seems to affect some users with AMD cards. Unigine Valley also has the same problem.

 

[xtreemchaos]

heres mine nothing to write home about.

 

[Malik Sajid]

heres mine nothing to write home about.
View attachment 119865

Is the temp okay for that fan speed?

 

[xtreemchaos]

yes mate its a blower founders ED, its about right thay hit high.

 

[MrGenius]

MISSING TEMPERATURE READING (AMD USERS)

I have sent a message to Unigine Support Team about the missing temperature reading & pointed them to this thread. The missing temperature readings only seems to affect some users with AMD cards. Unigine Valley also has the same problem.

I wouldn't expect them to do anything about it. I guess it would be nice if they did though.

 

[delshay]

I wouldn't expect them to do anything about it. I guess it would be nice if they did though.

The way I see it, it's about the health of your card. If you can't see the temperature, how do you know how hot your card is running, after all these tools can stress GPU/VRM.

ON ANOTHER NOTE "UNIGINE SUPERPOSITION".

I contact Unigine support team a few days back & ask them about Vulkan support for Superposition, as this benchmark was suppose to be getting this a short time after release. As of typing this, Vulkan is not integrated into the Unigine engine, & they don't have a released date if & when it will be completed.

 

[Smok3]

Nice score there, mate!

I think heaven isn't optimized to benefit from multithreading, in this situation i3-6100 > i7-950 single thread performance wise and packed with some newer instructions, Also let's not overlook that these clocks +1500mhz/2250mhz are quite high for an Rx 570 within the official voltage limits, not showing off here but I'm just trying to say it maybe wasn't fully stable even if there weren't any visible artifacts.

Anyway, I don't use these clocks 24/7 it were just on for benching.

Thanks for the reply mate
i have a little update after alot of testing i found the sweet spot let's say at 1390 core and 1800 memory(Elpida) probably because it's Elpida i can't seem to take it higher
Anyway i'm really surprise to get this out of a RX 470 refference Sapphire card(blower style fan) with default clock at 1216 core and 1750 memory with the original bios and i can't go higher than 1240 core cause i get artifacts.With the RX570 Sapphire Nitro Bios it's like i get almost 200 mhz more with no problems(i did forgot to tell u that i upped the voltage inside afterburner +25) and i get verry good temps ,after testing in heaven the stablity(made 5 benchmarks looked verry carrefully only for artifacts) i played for like 5 hours Generation Zero no crash no artifacts no slowdowns,temps 62-69 degrees i did have the frame rate locked to 80 trough RTSS (woderfull app) so after that i came to the conclusion that this is stable

 

[Master Cole X2]

Hello this is my first time OC my GPU had it for about 2 years and never OC till now. here is the max i could get to WITHOUT artifacts. Core clock 2164MHz and Memory 4749MHz Max GPU Votage (that i saw) 1.094V hottest Temp was 78c. As anyone seen a higher score with a gtx 1070 AIR Cooled??? I also recorded the run and will upload to youtube if requested.

 

[Roddey]

63c during the test for the GPU temp.

 

[NoJuan999]

AMD Ryzen 5 2600 @ 3.9 GHz / MSI GTX 1660 Ti Armor OC - Memory @ +1000 (7001 MHz) / GPU @ +125 MHz (2070 MHz)
Max GPU Temp - 60C

 

[sounik]

Ryzen 1600 @ 4.2ghz
Evga Gtx 1080 ftw @ 2100mhz/6000mhz (core/memory)
Trident z rgb @ 3000mhz/CL13
1080p score 3234 points

1440p score 1908 points

 

[xtreemchaos]

just fitted a arctic Accelero twin turbo 3 to my founders ed 1080 and what a diff in temps was 84c and hitting the limiter all the time now 57c and boosting to 2080 mhz and you carnt hear the fans at all. im well chuffed. this is the cooler with a backplate no glue needed cost £42 shipped from amazon.

 

[CTHub]

Sorry was taken on phone, scores at 2463 in 1080p grouping full screen. GPU clocks @ 1400/1800.

 

[Vayra86]

just fitted a arctic Accelero twin turbo 3 to my founders ed 1080 and what a diff in temps was 84c and hitting the limiter all the time now 57c and boosting to 2080 mhz and you carnt hear the fans at all. im well chuffed. this is the cooler with a backplate no glue needed cost £42 shipped from amazon.
View attachment 121582

That looks a bit fishy. Might want to re-run the benchmark in full screen and with 8xAA instead of this windowed, not-1080p and probably lower AA setting.

Right now your 1080 is scoring 1080ti points GPU might be nice and cool, but that's just not happening.

 

[xtreemchaos]

i carnt get a screen shot any other way, no keyboard so have to do windowed, no cheating intended i mean whats to gain? its as near as i can get to 1080. + ive backed it up with a before score. mate we dont all fit into the same box. dont you think you being a wee bit paraniod.
heres just the result full 1080 if it pleases.

 

[MrGenius]

i carnt get a screen shot any other way...

Get that ironed out and you'll be in the top 10.

 

[pedwards]

I'm new to the OC world, but have recently purchased a new PC. It's clear there is a lot for me to learn, however I'm enjoying each step;
1080

1440

 

[pedwards]

After reading the rules again I found there were 3 areas I did not correctly follow. Firstly my first attempt had the sound off. The second the evidence, my screen shots were only of the score. Thirdly the GPU and CPU details. Hope these are suitable for entry now.

Please see below my second attempts;
1080 - Score 4273
1440 - Score 2742

 

[csorosz78]

Mine: (i dont find here

some good old school stuffs, thats the reason

VGA: XFX RX480 8GB RS @1390/2250
SysRam: Corsair Dominator 4x2Gb 1066mhz