• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Xeon Owners Club

Which is what i replied with
I'm Sorry if you fail to understand what i wrote and it shows that i do not need to work on my skills
Which was my point?

Sorry but you got that wrong
Enabling HT doubles the Threads
" and its disabling HT that Reduces the Available Threads.
Made it large for you, Come back when hyperthreading doesn't half the available threads, time for maths classes.
 

Attachments

  • IMG_0094.PNG
    IMG_0094.PNG
    175.1 KB · Views: 296
Your both right, your just saying it in different ways, enough already.
 
Got a new old CPU today. Late posted. Lol

View attachment 104894
Going to OC it or run it stock? If you aren't or can't OC it, look into Throttle Stop. The newest version is solid and work wonders. It will allow you to lock all your cores at their highest multiplier full time. This is useful in anything that is CPU intensive.
https://www.techpowerup.com/forums/threads/throttlestop-overclocking-desktop-pcs.235975/
https://www.techpowerup.com/download/techpowerup-throttlestop/
 
I have three of them. I originally was going to add a 2nd to my Dell Precision T5500, but I've tried multiple riser cards and CPUs, and always get a memory configuration error, even though I've tried half a dozen different configurations, two different riser cards and three different CPUs.

I had a little more luck overclocking one of them with SetFSB. However, the most OC I could get out of it was a measly 70MHz.
 
I am not 100% sure but i think i had a few X5670 but maybe am wrong:wtf:
 
Unfortunately my x5670 T3500 Dell I bought, is sitting downstairs in the bldg management office. It was delivered Wednesday, unbeknownst to me, and I was there Wednesday!!

I was inquiring about deliveries, since boxes all go through them. Silly woman can't read? Doesn't care? Man, I am trying to think of ways to be calm, when I see her tomorrow.
 
Man, I am trying to think of ways to be calm, when I see her tomorrow.

Poor thing.

I wouldn't like to be in her shoes :laugh:
 
I am going to try, very hard to be civil with her. I may even mention that, so she understands. What I am afraid of, is that she will say something stupid. I am almost counting on that. And that is where I need the calm. I think I may be OK, just acknowledging the situation, beforehand, can help.

But, I am upset. I don't get many days off. Last Wednesday, was one of them. I might not get another off until next Sunday! So, the few hours between waking up and leaving for work, often means I am away when their office is open! Tomorrow, I may have some time to get it, look at it, maybe order another stick of memory, but, Tuesday is a 13 hour day, and Wednesday I can pick up the GPU being delivered....

OH well. Eventually, it will be up and crunching!
:lovetpu:

Edit: Well, Looks like I will not be getting the workstation out of the basement, until Wed. I will be working open to close Mon and Tues. So, Wed. looks to be the day. The GPU will be there also, so I should be up and crunching, stock clocks, by Wednesday afternoon.
 
Last edited:
Here's a picture of my system using a Xeon E5-1620 V4 and only a single stick of 32GB registered ECC memory because it was the cheapest 32GB kit available.

Ey9bmfQ.jpg

I use this computer for deep learning, which is why I have two graphics cards in it. The RX560 (bottom) is for graphics, the R9 280X (top) for compute. I also have a second R9 280X, but it's sadly broken.
 
Somehow that wouldn't surprise me!! :D

Now that I remember i skipped the X5670 and bought 10 X5675 which i used for Crunching
 
Xeon W 3680 , GA-EX58-UD3R ,Kingston HyperX KHX2400C11 , easy
 

Attachments

  • 4.4ghz2400mhzR15cpuZ.jpg
    4.4ghz2400mhzR15cpuZ.jpg
    448.8 KB · Views: 262
Now that I remember i skipped the X5670 and bought 10 X5675 which i used for Crunching

Now why am I definitely not surprised at that?? lol :D When you do something @Knoxx29 you definitely do it right :D

Very nice result there @DooM3 :) Very impressive!
 
I just ordered DX58M01 Board +I7 930 +6Gb ddr3 1333Mhz(3x2)=60€....I know that 6 core Xeons not going to work in this mobo but anyway the price was good so I am planning to build a "baby" gaming Rig as I have some GT 640 +Case&PSU that is laying around.......btw this mobo was in Dell studio XPS435 MT...if anyone have any experience with this mobo your help will be very much appreciated
 

Attachments

  • For-XPS435-DX58M01.jpg
    For-XPS435-DX58M01.jpg
    289.7 KB · Views: 274
Last edited:
1150 Xeon on BIOS

View attachment 104994



Getting an green Motherboard tomorrow for my x5670 CPU. So all 6 ram slots will be occupied.

I believe you a very similar CPU as I do...

https://ark.intel.com/products/80917/Intel-Xeon-Processor-E3-1226-v3-8M-Cache-3_30-GHz
https://ark.intel.com/products/80916/Intel-Xeon-Processor-E3-1246-v3-8M-Cache-3_50-GHz

If it's for crunching or just a small home server, brilliant little thing!! I'd like to get another so I could replace my G3258 I have in my server currently....
 
Memory on x 58 2133 mhz divisor 8 setting of the bios


Memory on x 58 2400 mhz divider 9 setting of the bios

 
Back
Top