Your PC ATM

[xtreemchaos]

I like that setup, but the caps may be bad already in that Thermaltake Smart series 600W PSU

thanks mate, the psu looks to be in good order, i change the fan with a old corsair one "recycled" because the old one had a rattle and checked caps and board for anything dodgy, i think its about 3 years old. .

 

[dogwitch]

so i putting ssd else where. seeing i added 2 more drive to pc. (2 laptop ones i got for free)
i also plan on putting a different aio in case. due to old one failing. using temp hs atm on it.
part listed in link

https://pcpartpicker.com/user/firedrakes/saved/hRKKXL

 

[theFOoL]

Tonight being worked on

​

 

[Apocalypsee]

I bought RX 550 because I'm bored using the same card for two years. Since mining craze I can't buy anything higher because crazy prices on every tier. Its sooo smol

Heck, its shorter than X-FI Titanium HD!

And I greeted with this new AMD driver control panel, its absolutely ABSURD. I love the old control panel, much faster and more professional looking. This one looks like teenager made them

Best yet, this one is based on Polaris 21, so it came stock with 640sp, and easily unlocked to 768sp. I reckon it can do 896sp but I can't find the right VBIOS or unlock the current VBIOS further.

 

[micropage7]

Got milk?

The SFF crowd loves using 355ml Coke cans for size comparison - why not a healthy alternative that you can enjoy guilt-free?

colorful cables, it's pretty rare for now

 

[Secret Rival]

3900x upgrades fitted for 2021-new mobo "aorus ultra x570",new Res, new ram , new fans, new m.2 , some diff pipes. still wating on a 3070 to finnish.
View attachment 187793
ye old 7700k build updates new res n pump, gx 750 PSU,new fans old ram outa 3700x and will be getting the 1080 as soon as.
View attachment 187794Hi, nice case. Seems a lot of people don't like Thermaltake, but I do. Some parts are not as sturdt as they should be - the molex to controller wires are made so the 4 pins come out the back if they don't line up right, and the wires on the 9 pin reverse patter usb female plugs have wires thinner than Angel Hair pasta. I like and have this chassis - if it is a P5. I really want the P7though so I can get really out there with the build.

Hi, nice case. Seems a lot of people don't like Thermaltake, but I do. Some parts are not as sturdy as they should be - the molex to controller wires are made so the 4 pins come out the back if they don't line up right, and the wires on the 9 pin reverse patter usb female plugs have wires thinner than Angel Hair pasta. I like and have this chassis - if it is a P5
Just curious, you don't seem to have any Thermaltake parts besides the chassis - have you thought about the RGB fittings?
I have a set, and I think they work great with small lengths of tubing. All your fittings look great, not sure what brand, everything looks real clean.
I have my water block, 4 quad fans P32 D-5 pump, and the fittings - also an irgb 1000w PSU. they all work together well once you figure out that the PSU will match the number of whater you click and will change to the next controller you switch it to. pretty difficult, but worth it I think.
I really wanted the P7m though, so I could go all out with the radiators (3) and all that. Great looking job you did


Sorry if the message is muddled, had a pin in the ass trying to get it set up right! but I love the P5 and P7 even more but I'd suggest the rgb fittings. opague white coolant will mafe the RGB lighting show up better I believe.

 

[xtreemchaos]

thanks mate, all the fittings are barrow double seal cheap at about £4 each and thay do a fine job. you can add another 480 rad to the top of the P5 if your into making some brackets ive seen it done a few times both flat and standing. i dont use anything apart from distilled water with a bit of inhib anything more and its a step back in cooling i think last time i used colour in a my loops was at least 10 years ago. post a pic of your rigg bud.

 

[StrayKAT]

Not much to say about it. Went all AMD this time around. Same case for years. I think the Green C70 is about the only thing that actually fits the ugly Noctuas.

 

[freeagent]

I'm probably one of the rare few that don't think they are ugly lol.

 

[80-watt Hamster]

I'm probably one of the rare few that don't think they are ugly lol.

Can't see them behind a windowless panel. I get the Redux, though.

 

[freeagent]

I like mine too, but someone was nice enough to say it looked worse than a Noctua fan

 

[tabascosauz]

Not much to say about it. Went all AMD this time around. Same case for years. I think the Green C70 is about the only thing that actually fits the ugly Noctuas.

What's up with the A12x25 on the case and the A12x25s on the cooler competing over airflow? Blowing in opposite directions.

 

[StrayKAT]

What's up with the A12x25 on the case and the A12x25s on the cooler competing over airflow? Blowing in opposite directions.

They're not competing. Pretty much this below (have 1 top fan, but I guess the pic didn't show it): CPU is intaking from the front side.

edit: haha..shit you're right. just flipped the cpu fans around. got a little too impatient, i guess. That is not what I meant. Good thing I haven't done anything with this machine yet.

 

[Vendor]

my new rgb case is awesome

 

[Secret Rival]

thanks mate, all the fittings are barrow double seal cheap at about £4 each and thay do a fine job. you can add another 480 rad to the top of the P5 if your into making some brackets ive seen it done a few times both flat and standing. i dont use anything apart from distilled water with a bit of inhib anything more and its a step back in cooling i think last time i used colour in a my loops was at least 10 years ago. post a pic of your rigg bud.

I'm still working on it, the tubes are a bit crooked and I'm still trying to find a good way of measuring them. These are the 2nd tubes I did, the 1st with the regular C-Pro fittings was much better. Still, you can get a look at the tubes with the lighting. Long tubes are no good, but I have a way of using smaller sections with more fittings. As soon as I can get another set, I'll do that job. Not a great picture either.

 

[xtreemchaos]

that looks very nice, thay work good those rbg fittings, most of my pipes are recycled from customer builds apart from the long ones, crooked pipes dont worry me on my own riggs as long as thay seal well. im going to put another rad at the top sometime this year if one turns up or even if i have to buy one my other intel rigg is mosty made of recycled bits ive took off folks riggs even the processor was a gift.

 

[theFOoL]

All my Tech

 

[biffzinker]

What’s the egg carton for? Keeping the screws sorted?

 

[theFOoL]

What’s the egg carton for? Keeping the screws sorted?

Yes-Sir

 

[phanbuey]

genius

 

[Shooter308]

Here's my new custom build;

New - Asus TUF Gaming X570-Plus WiFi motherboard
New - AMD Ryzen 7 3700X CPU
New - 32GB Corsair Vengeance LPX DDR4-PC3000 memory
New - Samsung V-NAND EVO 860 SSD Sata 1 TB drive
New - Corsair RM650X modular PSU
New - Phanteks Pro M Tempered Glass
Used - same MSI NVIDIA GeForce GTX 1060 6GB video card

I just want to get some RGB strips and a RGB fan for the rear of the case.

 

[Vendor]

My new setup, finally shifted to this amazing gaming desk gifted by my sister couple of months ago

 

[RJARRRPCGP]

Here's my new custom build;

New - Asus TUF Gaming X570-Plus WiFi motherboard
New - AMD Ryzen 7 3700X CPU
New - 32GB Corsair Vengeance LPX DDR4-PC3000 memory

Did you use XMP for that Corsair Vengeance LPX? Right now, it seems to be working fine. (With same CPU)

 

[Shooter308]

Did you use XMP for that Corsair Vengeance LPX? Right now, it seems to be working fine. (With same CPU)

I have not messed with XMP yet on my system.

I've been busy building a custom desktop for a friend, and I just changed out the mobo on a HP Elitebook 8460w laptop last night.

 

[RJARRRPCGP]

My Ryzen timeline:

January 3, 2020, was when I bought my Ryzen system at Best Buy literally (MSI B450 Tomahawk, Ryzen 3 3200G and 16 GB of Corsair Vengeance LPX DDR4 SDRAM) and walked out with the build, was super happy and thus felt sort of like I owned the joint!

For the Matisse, I got that in June, 2020, remembered being excited to be in Windows 10 1909 with it and chatting to one of my buddies about it, IIRC.