Your PC ATM

[l1CappYl1]

I'm starting the assembly of my new home for my hardware and thought this turned out nice. Much better than using their silly stand-offs.

View attachment 386144 View attachment 386145

I'm curious how loud the pump will sound mounted outside of the case. Also will it be connected externally, or will you run the wires back in?

 

[Fokker]

I'm curious how loud the pump will sound mounted outside of the case. Also will it be connected externally, or will you run the wires back in?

I am running the wires back inside. Mounted there, I can't expect too much of a sound difference over using their standoffs since that was just grille in that area. I've added some rubber washers to act as isolators to keep the reservoir from making direct contact with the case.

 

[de.das.dude]

wire management wasnt a thing in 2000s

 

[maochen]

 

[l1CappYl1]

Having hella bad luck with connectors and adapters. Decided to just run as is for now and redo cables once i get all the proper adapters.

Still lots of air to bleed out, but she's up and running.

 

[Gunbound]

I'm a dirty birdy

 

[Ruru]

After seeing the discussion about PhysX in a long time (because Nvidia ditched the 32bit support for it), I put a dedicated PhysX card on my 3rd PC in the form of GT 640 because why not.

 

[freeagent]

Swapped my AIO out for my first one. That Frozen Edge performed ok, but the pump has always been loud on that one. Plus for whatever reason I am seeing way lower load temps with this one. This thing is a pretty basic case so I had to make it look uglier with some stickers and a p/p setup on my AIO.

 

[Lost_Troll]

Just finished putting a small system together to replace a 10th Gen i3 Intel NUC that is connected to my TV. While I am waiting for my MSI 482 2Tb NVME drive, I have a 500Gb MP44L with WIN 11 Pro that I am using to stress the system out, though once I get it, I plan on installing Bazzite and turn it into a steam PC for light gamming. So far, the system is running pretty sweet, that even The Last of us run good on it surprising.

The build consists of AM5 7400F, AsRock B620I Lightning MB, Kingston HyperX 16Gb CL30 Kit, Powercolor RX7600 8Gb Hell Hound, FSP450W Pro SFX Supply, Jonsbo C6 ITX Case, Thermalright 120 AIO Aqua Elite V3, And Cat hair-Lots of it..Meh

 

[Ruru]

Took the cathodes away as I'm planning to use them in an another build.

 

[jallenlabs]

And here we are again! Picked up gtx 1660ti (evga xc 3 slot) last night for my workstation (replaces gtx 1060). $80 well spent. Threw a block and heatsinks on it and here we go! After overclocking temps went down 24c on gpu 25c on hotspot. VRAM has no sensors.
2nd place for my config so far in pcmark10, 3dmark. Onward!

 

[Kovoet]

View attachment 386368

wire management wasnt a thing in 2000s

That was my first one in Crossfire with a pair of 5800's back in the day

 

[Frizz]

The final piece of the puzzle!

 

[avidgamer121]

i know it's still dusty (mainly due to being slightly sticky and i used a dry cloth) but i tried my best and it does seem to look bit exaggerated in the pics but it is still alot better

monitor upgrade, swapped monitor with my brother, 75hz over 60hz and freesync, not bad but can't take advantage of latter because my monitor doesn't have dp.

 

[de.das.dude]

The cat is always around when i am on my work laptop. Funnily doesnt interfere when i am working from the desktop.

 

[nomdeplume]

@de.das.dude
Urge to post a gif that descrambles to something shocking is hard to resist after being lead to believe I was about to read how the cat ruined your laptop.

---

It's been over two months of watching the mailbox for SATA powered fan adapter from Superflower. By that point I was convinced someone grabbed it from wherever it got left outside. Then a few days ago I was advised to avoid online purchases due to an immense level of package theft.

Despite that terminal loss I decided to make one more attempt at correctly installing my front case fans . Only took an hour but they can now be easily daisy chained for use with a powered adapter of some kind. With any luck I'll find a reasonable quality single fan model that supports PWM. And actually take reception of it.

 

[de.das.dude]

@de.das.dude
Urge to post a gif that descrambles to something shocking is hard to resist after being lead to believe I was about to read how the cat ruined your laptop.

---

It's been over two months of watching the mailbox for SATA powered fan adapter from Superflower. By that point I was convinced someone grabbed it from wherever it got left outside. Then a few days ago I was advised to avoid online purchases due to an immense level of package theft.

Despite that terminal loss I decided to make one more attempt at correctly installing my front case fans . Only took an hour but they can now be easily daisy chained for use with a powered adapter of some kind. With any luck I'll find a reasonable quality single fan model that supports PWM. And actually take reception of it.

its just teams chit chat originally.

 

[InVasMani]

View attachment 389919

The cat is always around when i am on my work laptop. Funnily doesnt interfere when i am working from the desktop.

I see you like your portable entertainment screen how about you pick me up and carry me awhile u lazy hooman mayhaps bring me to food dish and stay awhile and watch mii eats listen don't you go anyway u sticking around and keep a eye on all the inactivity happening while I munch or I get a little paranoid and look at u funny awhile.

 

[Fokker]

Continuing my weird habit of trying to shoehorn as much hardware into a mid-tower as possible, I'm going to have to make a custom mount for my Corsair pump/reservoir since the 3080 is so long that I can't use the factory mounts. (Don't mind the foam, I'm moving and I'll finish it next month.)

I also have to send my XD5 pump/reservoir in for RMA since it somehow it cracked the outer housing (never moved the case).

 

[jallenlabs]

Still in progress. Almost done, again. The Dell Ferrari F512TR build. Lots of fabrication.
When its complete Ill post it back up in the gallery.
12600kf 5.6ghz AC w/HT, no eCores
32GB 3600mhz cas 15 bdie
Intel Optane 900p/SK Hynix p41/2xCrucial in R/0
MSI z690 Tomahawk DDR4
Asus RTX 4070 Super
Seasonic 850w plat
OLD Dell XPS 510 BTX case

It now has four rads, 2x 120 and 2x80, 2 reservoirs, cpu and optane blocks and a dozen fans. Maxes at 80c when fully loaded while benching.

Its been a fun few years working on this and I have started another.... Ferrari build.

 

[Veseleil]

Still in progress. Almost done, again. The Dell Ferrari F512TR build. Lots of fabrication.
When its complete Ill post it back up in the gallery.
12600kf 5.6ghz AC w/HT, no eCores
32GB 3600mhz cas 15 bdie
Intel Optane 900p/SK Hynix p41/2xCrucial in R/0
MSI z690 Tomahawk DDR4
Asus RTX 4070 Super
Seasonic 850w plat
OLD Dell XPS 510 BTX case

It now has four rads, 2x 120 and 2x80, 2 reservoirs, cpu and optane blocks and a dozen fans. Maxes at 80c when fully loaded while benching.

Its been a fun few years working on this and I have started another.... Ferrari build.
View attachment 390529

View attachment 390533

Judging by those fans alone, it might sound as a Ferrari too (an F1 at that).

 

[jallenlabs]

Judging by those fans alone, it might sound as a Ferrari too (an F1 at that).

Actually most likely of them are on a curve. Besides, what better than a f1 v10 singing?! The reason for so many fans is so they can spin slower and cool hotter parts directly.
2x120x38mm/4x80mm on rads
92mm pcie area cooling
92mm memory and mosfet cooling
80mm top bay intake
60mm i/o exhaust
20mm nvme fan
Stock gpu fans

 

[InVasMani]

It's like Ferrari had a tech plumber baby that built a mean CPU machine.

 

[jallenlabs]

It's like Ferrari had a tech plumber baby that built a mean CPU machine.

Yeah, lol, thanks for the compliment. There is still a few things missing here that I have shown here before and some new things coming. I have to deal with the upside down Nvidia text on the GPU somehow and as it the GPU is upside down, its difficult to cool... so some ducting, or something may be in store. I am working on my other rig at the same time and I think its time to get them both finished an move on to the next one.
Here is a look at a stock version of this case. I took the image from Bill Owens site (sorry Bill,lol) as I couldnt find my OG pics from over a decade ago.

 

[de.das.dude]

Yeah, lol, thanks for the compliment. There is still a few things missing here that I have shown here before and some new things coming. I have to deal with the upside down Nvidia text on the GPU somehow and as it the GPU is upside down, its difficult to cool... so some ducting, or something may be in store. I am working on my other rig at the same time and I think its time to get them both finished an move on to the next one.
Here is a look at a stock version of this case. I took the image from Bill Owens site (sorry Bill,lol) as I couldnt find my OG pics from over a decade ago.

View attachment 390644

shouldn't it be easier to cool since its upside down?