• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Your PC ATM

err WxHxL (w=120mm, h=38mm, l=??? however many 120mm fans you can put on it + a bit for the inlet/outlet connectors)

Sorry, I forgot a decimal. Right around 84mm thick. Looks tight between HDD cage and bottom of case.
 
id say you could fit a dual rad /triple and then there would still be room for like gtx-470 and such

the 470 is as long as to the mb's edge
 
To an extent they are, but it depends on the person.

Personally i see a lot more disadvantages of running computer hardware outside of a case.

Me too , I have kids with passion fingers... Everything they touch they ..... Well you know what I mean:laugh::toast:
 
That's the only way to go, imo. Cases are a hindrance.

It's the same with all parts: when outside the house, I like to have my parts neatly tucked in. Not everyone gets the privilege to see what's inside. They might find out it's just micro-ATX form factor ;)
 
Currently messing around with undervolting, what's the stock voltage for xeon 3220 first revision? ( 105w version)

Got it down ( I think) to 1.1, I think stock was 1.22 or something not 100% sure.

Temperatures are great because of it. ( idle and full load here) It's 16c outside, not sure what it is in my room.

xeon11t.png


Might try getting to 1 v.

Doing this because this chips a dud for over clocking now 3.2 being it's sweet spot @ 1.29 volts, past that the voltage requirements and heat out put makes it not worth my time.

So lowering temps is my new bench marking XD
 
Currently messing around with undervolting, what's the stock voltage for xeon 3220 first revision? ( 105w version)

Got it down ( I think) to 1.1, I think stock was 1.22 or something not 100% sure.

Temperatures are great because of it. ( idle and full load here) It's 16c outside, not sure what it is in my room.

http://img.photobucket.com/albums/v311/mopatop/xeon11t.png?t=1283171372

Might try getting to 1 v.

Doing this because this chips a dud for over clocking now 3.2 being it's sweet spot @ 1.29 volts, past that the voltage requirements and heat out put makes it not worth my time.

So lowering temps is my new bench marking XD

its fun, isnt it :D

its why i like modern stuff (like 5870's :P), you can get really low idle wattage/temps without having to forgo OCing
 
Sorry, I forgot a decimal. Right around 84mm thick. Looks tight between HDD cage and bottom of case.

is that with or without fans attached
 
god damn cheap arse Chinese Fans you wouldn't read about it my HD5770 isn't evan an year old and the fans gone poo it's jammed tighter than the proverbial nuns you know what :banghead::mad:

and when i removed the vid card and pulled the fan off it's some fully sealed thing that can't be re-lubed so I had to ghetto mod a case fan for now as all the shops are closed :eek: ;)

one good thing though the temps have gone down a couple of Deg C :toast:

025.jpg
 
Last edited:
is that with or without fans attached

With, Panflo 38mms. A guy could put the 38mms in the case, sling the rad under the chassis, and extend the feet if he wanted a set of pull fans.

Video card looks good. I'd leave it that way.
 
buy a shorter DVD burner I don't have a problem with my Pioneer DVR212S getting in the road of me putting a card in the last PCIe slot on my M3A32mvp-deluxe mobo if I wanted to

http://public.bay.livefilestore.com...P7_AWVdxVvZ3pw/3 new on with flash.JPG?psid=1

as you can see it's barely longer than the 5.25" bay itself

Nice! Think those fans should be on my list of things to buy too. What temps are you getting with passive heatsink in that rig?

My drive is Blu-Ray, too damn expensive atm for me to start looking for an exchange one :banghead: Think external enclosure will be the solution to my problem.
 
I don't think I ever posted my latest setup... here it is. (Apple haters... zip it. :) )

4864844741_db00117b66_o.jpg


MacBook Pro i5
Replaced original HD with WD Scorpio Black 7200RPM 500GB
Logitech Illuminated Keyboard
Apple Magic Mouse
Alupad Mouse Pad (Image here)
23" Samsung PX2370 LED Monitor
Rain Design mStand Laptop Stand

Now, PC related, I still have my water setup and of course my homemade tech station. Once I'm feeling the OC'ing itch again, I will probably pickup another AMD setup. I had too much fun with the 1090T to not go back to AMD. :)
 
Last edited:
wow, ben a while since we heard from you :D

looking good
 
:P thanks!
I'd be more active but, just had a baby. He's keeping us occupied no doubt.
 
:P thanks!
I'd be more active but, just had a baby. He's keeping us occupied no doubt.

oh right on! congratulations on the little bundle:toast:
 
Nice! Think those fans should be on my list of things to buy too. What temps are you getting with passive heatsink in that rig?

My drive is Blu-Ray, too damn expensive atm for me to start looking for an exchange one :banghead: Think external enclosure will be the solution to my problem.

It's not a passive HSF it's an Tuniq Tower 120 the fan sits in the middle and is held by the black top piece and frame you see



Quote:Originally Posted by MT Alex
With, Panflo 38mms. A guy could put the 38mms in the case, sling the rad under the chassis, and extend the feet if he wanted a set of pull fans.

Video card looks good. I'd leave it that way.

if you put the rad under the case and just use the 180mm fans in the case as they do move a fair amount of air .... the standard fans that come with the case have two speed settings LO=700rpm and HI= 1000rpm on high they move about 117cfm each whilst remaining fairly quiet



number five is alive it wont be long before he's sleeping right through the night

I would but i can't be arsed
 
Last edited:
not to be rude , but just edit you post next time :laugh:
 
I don't think I ever posted my latest setup... here it is. (Apple haters... zip it. :) )

http://farm5.static.flickr.com/4120/4864844741_db00117b66_o.jpg

MacBook Pro i5
Replaced original HD with WD Scorpio Black 7200RPM 500GB
Logitech Illuminated Keyboard
Apple Magic Mouse
Alupad Mouse Pad (Image here)
23" Samsung PX2370 LED Monitor
Rain Design mStand Laptop Stand

Now, PC related, I still have my water setup and of course my homemade tech station. Once I'm feeling the OC'ing itch again, I will probably pickup another AMD setup. I had too much fun with the 1090T to not go back to AMD. :)

Simply beautiful. You've got very good tastes :toast:
 
athlonite: please edit that triple post into one, you can delete your own posts in the edit menu, so just cut nad paste them back into one post.
 
woohoooo just ordered my first sleeving :D

later ill order the new 24"'er , a new harddrive, not sure if i want a ssd yet, will see what the budget says

sleeve.jpg
 
athlonite: please edit that triple post into one, you can delete your own posts in the edit menu, so just cut nad paste them back into one post.

Done :toast:
 
woohoooo just ordered my first sleeving :D

later ill order the new 24"'er , a new harddrive, not sure if i want a ssd yet, will see what the budget says

Do you already have the PCI-E and 24Pin remover tool. If you don't it is a good idea because those pins cannot be removed with the save my wallet pin remover.

You may already know this but I am just giving you a heads up as that tool is a lifesaver.
 
Back
Top