Your PC ATM

jzv · Jul 8, 2011

I painted the crossfire bridge black !

And found some reference Sapphire cards instead of the crappy XFX.

cadaveca · Jul 9, 2011

update:

Cold Storm · Jul 9, 2011

cadaveca said:
update:
http://www.techpowerup.com/forums/attachment.php?attachmentid=42844&stc=1&d=1310172531

http://www.techpowerup.com/forums/attachment.php?attachmentid=42845&stc=1&d=1310172531

http://www.techpowerup.com/forums/attachment.php?attachmentid=42846&stc=1&d=1310172531

http://www.techpowerup.com/forums/attachment.php?attachmentid=42847&stc=1&d=1310172531

http://www.techpowerup.com/forums/attachment.php?attachmentid=42849&stc=1&d=1310173552

Looking good. :toast:

Ever think about renaming those short cuts? :nutkick:

cadaveca · Jul 9, 2011

Cold Storm said:
Ever think about renaming those short cuts?

Why? I install windows like every couple of weeks, can't be bothered.

Cold Storm · Jul 9, 2011

cadaveca said:
Why? I install windows like every couple of weeks, can't be bothered.

you know I have to dig at something... :roll:

Folders man... folders... J/k

We all know why you change windows like your underwear.. we see the stuff to prove it.

:toast:

t77snapshot · Jul 9, 2011

Very nice work Jan Kyster! I dig those radiator pedestal's, it looks clean with your setup.

Wile E · Jul 9, 2011

sneekypeet said:
I'm amazed , but errors are popping up over the long haul...more testing.

Pad is one of many DDR3 voltage points, I assume its tied to only one ram slot and maybe I can swap things around for some love.

I bent them back with the tip of an exact-o knife

Can you get a small blob of solder to stick?

Killing cpus and gpus with extreme voltage is always fun.

sneekypeet · Jul 9, 2011

Wile E said:
Can you get a small blob of solder to stick?

Killing cpus and gpus with extreme voltage is always fun.

Honestly it has tested as-is to be fully functional still. I had thought that, but if it works i don't think I'm gonna go poking that bear with a stick anytime soon

theJesus · Jul 10, 2011

theJesus said:
Last night, I finally got around to cutting out the rest of the mounting bracket to fit the H50 on my GPU. Pics to follow in roughly 11~12 hours.

Alright, I totally lied about those pics, I never got time. Anyway, time to deliver.

Sorry for the quality, it was taken in low light with point 'n' shoot.

edit: Yes I know that's not exactly optimal placement for the rad, but I couldn't really fit it anywhere else except outside the case :laugh:

and it's a sealed loop, so that wasn't exactly possible unless I left the side panel off. Also, I just threw two more 120mm fans in there, one on top of the card and one below.

cadaveca · Jul 10, 2011

Love the H50 on the VGA, and the Coolit TEC cooling. I gots me both of those too!

Personally, i think where it is is fine. Too bad the case doesn't have a fan hole in the bottom of the case though.

Cold Storm · Jul 10, 2011

cadaveca said:
Love the H50 on the VGA, and the Coolit TEC cooling. I gots me both of those too!

Personally, i think where it is is fine. Too bad the case doesn't have a fan hole in the bottom of the case though.

It doesn't now... "wink, wink"....

Looks like Jesus has something to do in the coming week.. :roll:

I do like it Jesus. :toast:

PopcornMachine · Jul 10, 2011

theJesus said:
Alright, I totally lied about those pics, I never got time. Anyway, time to deliver.

http://img.techpowerup.org/110710/IMG_1986-brighter.jpg

Sorry for the quality, it was taken in low light with point 'n' shoot.

edit: Yes I know that's not exactly optimal placement for the rad, but I couldn't really fit it anywhere else except outside the case and it's a sealed loop, so that wasn't exactly possible unless I left the side panel off. Also, I just threw two more 120mm fans in there, one on top of the card and one below.

So you put a cpu cooler on a gpu? What about the rest of the card? What model gpu is it?

I guess the important thing are the temps you're getting. Very clever anyway.

TheGrapist · Jul 10, 2011

i have an extra h50,maybe i should do that too

theJesus · Jul 10, 2011

No, putting a fan hole on the bottom would be a horrible idea for me. For one, I'd need to put the feet back on the case, and even then I don't think it would get enough airflow, but even if it did, it would suck up way too much dust.

PopcornMachine said:
So you put a cpu cooler on a gpu? What about the rest of the card? What model gpu is it?

I guess the important thing are the temps you're getting. Very clever anyway.

Yes, it's a reference GTX 560 Ti. The rest of the card is cooled with the stock cooling plate, which provides full coverage, then I added some vrm/mem sinks on top of that, and there are now two 120mm fans blowing across the card top and bottom, as well as a 250mm side panel fan. GPU temps range from 10-20c lower now and the board feels just about the same to the touch. I'm getting ~39c idle and when I ran furmark I don't remember seeing more than 55~60c I think.

Temps would be lower I think if I put the rad outside the case though, and my CPU temps did rise about 5c after I put it in.

TheGrapist · Jul 10, 2011

theJesus said:
No, putting a fan hole on the bottom would be a horrible idea for me. For one, I'd need to put the feet back on the case, and even then I don't think it would get enough airflow, but even if it did, it would suck up way too much dust.

what if you had the rad on the bottom of the case and a fan blowing into it so airflow wouldn't be a problem?

scaminatrix · Jul 10, 2011

I posted abut this in the Cable Management Helpdesk but I thought I'd share it here too.
Horizontal Right Angle SATA cable (not the normal type of right angle connection) has helped me aesthetically with my combination of Raven 2 + Crosshair IV Formula.
Before:
View attachment 42863

View attachment 42864

After:
View attachment 42865

View attachment 42866

The cables used:
View attachment 42867

Available from cheesefeat's shop on eBay. And I can help with worldwide sourcing if need be.

erek · Jul 10, 2011

theJesus · Jul 10, 2011

TheGrapist said:
what if you had the rad on the bottom of the case and a fan blowing into it so airflow wouldn't be a problem?

I'm not sure exactly what you mean.

TheGrapist · Jul 10, 2011

theJesus said:
I'm not sure exactly what you mean.

the rad would be mounted directly to the bottom of the case and then you put a fan on top of the rad pushing air through it....don't know how to be clearer other than drawing a diagram

theJesus · Jul 10, 2011

TheGrapist said:
the rad would be mounted directly to the bottom of the case and then you put a fan on top of the rad pushing air through it....don't know how to be clearer other than drawing a diagram

Oh, that's pretty much exactly what I was meaning by putting a fan hole on the bottom in the first place. It would just suck up too much dust from my floor and I feel that air-flow would be too restricted unless I raised the case high enough.

Also, that tubing isn't very flexible, so it's hard to get it to go certain ways, but I guess that's good so it doesn't kink.

TheGrapist · Jul 10, 2011

theJesus said:
Oh, that's pretty much exactly what I was meaning by putting a fan hole on the bottom in the first place. It would just suck up too much dust from my floor and I feel that air-flow would be too restricted unless I raised the case high enough.

Also, that tubing isn't very flexible, so it's hard to get it to go certain ways, but I guess that's good so it doesn't kink.

it wouldn't be sucking dust up from your floor in that config,and if you put a nice san ace,delta,GT it would be fine for airflow

theJesus · Jul 10, 2011

TheGrapist said:
it wouldn't be sucking dust up from your floor in that config,and if you put a nice san ace,delta,GT it would be fine for airflow

How would it not suck up dust from my floor?

edit: Derp, I just realized that you're talking about making it exhaust out the bottom, not intake.

TheGrapist · Jul 10, 2011

theJesus said:
How would it not suck up dust from my floor?

edit: Derp, I just realized that you're talking about making it exhaust out the bottom, not intake.

yes

theJesus · Jul 10, 2011

That might not be a bad idea, but I can't be arsed to mod this case anymore since I'm sick of it and want a new one lol

TheGrapist · Jul 10, 2011

theJesus said:
That might not be a bad idea, but I can't be arsed to mod this case anymore since I'm sick of it and want a new one lol

it'd take 5min with a drill and some tinsnips(yes it's ghetto but it's all i've got atm

),faster with some decent tools

System Name	Haro
Processor	AMD 1700x
Motherboard	AsRork x370 Taichi
Cooling	EK Custom Loop - CPU only
Memory	32gb G-Skill Trident Z
Video Card(s)	EVGA 1080 Superclock 2
Storage	Too Many
Display(s)	Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case	Cooler Master Cosmos II
Power Supply	Cooler Master V1000
Mouse	SteelSeries Rival 500
Software	Win10 Pro
Benchmark Scores	i5 750 4.62ghz pi runs // Evga FTW p55

System Name	Haro
Processor	AMD 1700x
Motherboard	AsRork x370 Taichi
Cooling	EK Custom Loop - CPU only
Memory	32gb G-Skill Trident Z
Video Card(s)	EVGA 1080 Superclock 2
Storage	Too Many
Display(s)	Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case	Cooler Master Cosmos II
Power Supply	Cooler Master V1000
Mouse	SteelSeries Rival 500
Software	Win10 Pro
Benchmark Scores	i5 750 4.62ghz pi runs // Evga FTW p55

System Name	New Build - Oct. 2021
Processor	Intel i7 10700k
Motherboard	Asus TUF Gaming H570-PRO
Cooling	Corsair H100i
Memory	Corsair Vengence 16gb 3600 mhz
Video Card(s)	Gigabyte RTX 3060ti 8gb
Storage	1Tb Samsung 970 EVO NvMe m.2
Display(s)	27" LG Ultragear 144hz
Case	Fractal Design- Meshify 2
Audio Device(s)	Onborad dts
Power Supply	Corsair RX 650 W
Mouse	Roccat Kiro
Keyboard	Razer Tarantula
Software	Windows 10 Home x64

System Name	The ClusterF**k
Processor	980X @ 4Ghz
Motherboard	Gigabyte GA-EX58-UD5 BIOS F12
Cooling	MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory	3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s)	Evga GTX 580
Storage	Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s)	HP LP2475w 24" 1920x1200 IPS
Case	Technofront Bench Station
Audio Device(s)	Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply	ENERMAX Galaxy EVO EGX1250EWT 1250W
Software	Win7 Ultimate N x64, OSX 10.8.4

System Name	EVA-01
Processor	Intel i7 13700K
Motherboard	Asus ROG Maximus Z690 HERO EVA Edition
Cooling	ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory	PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s)	Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage	Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s)	Asus ROG SWIFT OLED PG42UQ
Case	Thermaltake Core P3 TG
Audio Device(s)	Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply	be quiet DARK POWER PRO 12 1500W
Mouse	ROG STRIX Impact Electro Punk
Keyboard	ROG STRIX Scope TKL Electro Punk
Software	Windows 11

Your PC ATM

jzv

New Member

Attachments

cadaveca

My name is Dave

Cold Storm

Battosai

cadaveca

My name is Dave

Cold Storm

Battosai

t77snapshot

Wile E

Power User

sneekypeet

not-so supermod

theJesus

cadaveca

My name is Dave

Cold Storm

Battosai

PopcornMachine

TheGrapist

theJesus

TheGrapist

scaminatrix

erek

theJesus

TheGrapist

theJesus

TheGrapist

theJesus

TheGrapist

theJesus

TheGrapist

System Name	Desktop\|\| Virtual Host 0
Processor	Intel Core i5 2500-K @ 4.3ghz \|\| 2x Xeon L5630 (total 8 cores, 16 threads)
Motherboard	ASUS P8Z68-V \|\| Dell PowerEdge R710 (Intel 5520 chipset)
Cooling	Corsair Hydro H100 \|\| Stock hotplug fans and passive heatsinks
Memory	4x4gb Corsair Vengeance DDR3 1600 \|\| 12x4gb Hynix DDR3 1066 FB-DIMMs
Video Card(s)	MSI GTX 760 Gaming Twin Frozr 4GB OC \|\| Don't know, don't care
Storage	Hitachi 7K3000 2TB \|\| 6x300gb 15k rpm SAS internal hotswap, 12x3tb Seagate NAS drives in enclosure
Display(s)	ViewSonic VA2349S \|\| remote iDRAC KVM console
Case	Antec P280 \|\| Dell PowerEdge R710
Audio Device(s)	HRT MusicStreamer II+ and Focusrite Scarlett 18i8 \|\| Don't know, don't care
Power Supply	SeaSonic X650 Gold \|\| 2x870w hot-swappable
Mouse	Logitech G500 \|\| remote iDRAC KVM console
Keyboard	Logitech G510 \|\| remote iDRAC KVM console
Software	Win7 Ultimate x64 \|\| VMware vSphere 6.0 with vCenter Server 6.0
Benchmark Scores	Over 9000 on the scouter

System Name	Vulcan
Processor	i6 6600K
Motherboard	GIGABYTE Z170X UD3
Cooling	Thermaltake Frio Silent 14
Memory	16GB Corsair Vengeance LPX 16GB (2 x 8GB)
Video Card(s)	ASUS Strix GTX 970
Storage	Mushkin Enhanced Reactor 1TB SSD
Display(s)	QNIX 27 Inch 1440p
Case	Fractal Design Define S
Audio Device(s)	On Board
Power Supply	Cooler Master V750
Software	Win 10 64-bit

System Name	"I'm gonna Grape you in the Mouth!"
Processor	i5 3570k 4.5ghz
Motherboard	ASrock z77 PRO4
Cooling	megahalems
Memory	2x4gb G.Skill 2133mhz
Video Card(s)	Sapphire 7950 boost
Storage	WD 320gb
Display(s)	23" asus & 20" samsun
Case	CM HAF XB
Audio Device(s)	onboard
Power Supply	SeaSonic SS-660XP
Software	windows 7 SP1

System Name	Benny
Processor	Phenom II 1055t @ 3.3GHz; 300x11; 1.380v; NB 2700; HT 2400
Motherboard	ASUS Crosshair IV Formula (2002 BIOS)
Cooling	Thermalright TRUE 120 Black + 2 Xilence Red Wing PWM 120mm (push/pull) + polycarbonate fan holders
Memory	8GB GeIL Ultra 2133MHZ C9 running at 1600MHz @ 7-7-7-21 1T 1.5v
Video Card(s)	MSI Twin Frozr II GTX470 @ Stock w/CPU fan cable-tied on, as one of the GPU fans broke.
Storage	60GB OCZ Agility3 (OS);500GB WDC Grn; 1x1TB WDC Blk (Backup)
Display(s)	ASUS PA823Q
Case	Silverstone Raven 2 (all cables custom sleeved with velcro mod on side panel...)
Audio Device(s)	X-Fi (Onboard) + Harmon Kardon HK6100 amp powering JVC HA-RX700's with Zalman mic
Power Supply	Corsair HX650W
Software	Win7 Pro x64
Benchmark Scores	No benchies so making this space useful! Corsair M90, Logitech G19. Phobya FlexLight LED's (gawjus)

System Name	Beaver's Build
Processor	AMD Ryzen 9800X3D
Motherboard	Asus TUF Gaming X670E Plus WiFi
Cooling	Corsair H115i RGB PLATINUM 97 CFM Liquid
Memory	G.SKILL Trident Z5 Neo DDR5-6000 CL30 RAM 32GB (2x16GB)
Video Card(s)	NVIDIA GeForce RTX 4090 Founders Edition
Storage	WD_BLACK 8TB SN850X NVMe
Display(s)	Alienware AW3225QF 32" 4K 240 Hz OLED
Case	Fractal Design Design Define R6 USB-C
Audio Device(s)	Focusrite 2i4 USB Audio Interface
Power Supply	SuperFlower LEADEX TITANIUM 1600W
Mouse	Razer DeathAdder V2
Keyboard	Corsair K70 RGB Pro
Software	Microsoft Windows 11 Pro
Benchmark Scores	3dmark = https://www.3dmark.com/spy/51229598