- Joined
- Oct 21, 2005
- Messages
- 7,011 (1.02/day)
- Location
- USA
System Name | Computer of Theseus |
---|---|
Processor | Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset) |
Motherboard | EVGA Z690 Classified |
Cooling | Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active |
Memory | G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK |
Video Card(s) | ASUS PROART RTX 4070 Ti-Super OC 16GB, 2670MHz, 0.93V |
Storage | 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data), ASUS BW-16D1HT (BluRay) |
Display(s) | Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms. |
Case | Lian Li O11 Air Mini |
Audio Device(s) | Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer |
Power Supply | Super Flower Leadex Platinum SE 1000W 80+ Platinum White, MODDIY 12VHPWR Cable |
Mouse | Zowie EC3-C |
Keyboard | Vortex Multix 87 Winter TKL (Gateron G Pro Yellow) |
Software | Win 10 LTSC 21H2 |
Looks badassWhat casefans are you using? arent those 38mm server fans insanely loud?
I am running 5 Koolance 120x38mm 116CFM fans. I think they are re-purposed server fans like san ace / panaflo / delta etc. They are not as high performance as real server fans but they have an incredibly solid construction and only cost $9 each. They are dual ball bearing fans so they emit a faint click when they are undervolted but otherwise they make very low noise. At 12 volts, it sounds like a tornado in the room
![Wink ;) ;)](https://tpucdn.com/forums/data/assets/smilies/wink-v1.gif)
http://koolance.com/fan-120x38mm-116cfm
Koolance high quality, dual ball-bearing fan.
Dimensions: 120x120x38mm
Type: Dual Ball-Bearing
Connector: 3-pin (3-wire with tachometer)
Rated Voltage: 12VDC
Current: 0.75A
Speed: 2600RPM (max)
Static Pressure: 6.3mm-H2O
Airflow: 116.1CFM (max)
Noise: 39.00dBA (max)
if you really want to go nuts:
http://koolance.com/fan-120x38mm-184cfm
Koolance high quality, dual ball-bearing fan. [WARNING: This is a high amperage, high speed fan. Fan grills are highly recommended for safety!]
Dimensions: 120x120x38mm
Type: Dual Ball-Bearing
Connector: 3-pin (3-wire with tachometer)
Rated Voltage: 12VDC
Current: 2.0A
Speed: 4000RPM (max)
Static Pressure: 20.4mm-H2O
Airflow: 183.5CFM (max)
Noise: 59.00dBA (max)
Last edited: