NOS - Final Mod

Posted:
December 3rd 2007
Updated:
Viewed:
18,399 times
Rating:
Outstanding (6.7)
Voting Graph 15 votes total
Submit vote:
Please register on the forums & login to vote.
Key Features:
Intel CPU AMD Graphics AMD CrossFire Water-cooled Exotic-cooled
System Specs:
  • QuadCore Intel Core 2 Extreme QX6850
  • Gigabyte GA-X38-DQ6
  • 4x OCz Platinum DDR2-PC2 8500 - 1GB 1066MHZ
  • Dominator Corsair AirFlow
  • 2x ATI Radeon HD 2900 XT 1GB DDR4 Sapphire
  • SyncMaster 950B,SyncMaster Magic CX913T - Digital » Realtek ALC885 @ ATI Radeon HD 2900 - High Definition Audio Controller
  • Realtek ALC885 @ Intel 82801IB ICH9 - High Definition Audio Controller
  • Floppy disk
  • 5 x HD´s ST380815AS 7200.10 (80 GB, 7200 RPM, SATA-II)
  • HL-DT-ST DVDRAM GSA-4163B
  • HL-DT-ST DVDRAM GSA-H42N
  • Ultra X3 1000 Watts PSU modular
  • Customized Watercooler System
  • Edifier MP1500 5.1 Sound System
  • Play TV box
  • Rounded blue Cables Akasa, IDE,Floppy and SATA all shielded
  • 3x Cold UV catode
  • 2x Fan´s 120mmx120m front and back
  • Hydor Seltz L 35II 1.200Liters/Hours
  • Case R810 3Rsystems
Performed Mods:
Water block from Vantec Sting Ray Kit--»Customized Screews--» Customized NOS Reservoier (Steel INOX)--» Customized Radiator--» Customized Side Window with blue paint for protection and without screews for fix the policabonate in window--» Customized Relay for pump from Finder with conection base --» Display from termaltake with temps measured from (15°C in cold weather) to (28,7°C warm weather)--» Moded fans for radiador with 0,5 A each fan with 4.500 RPM--» Sleeving kit yellow blue and Red for better cable management and stetic--» Customized energy sata cables for HD´s controled by Dip switches for hot swap--» Weight of all system 30Kg--» Water with fluid 1 liter--» Customized Suport for tubes conexion--»
Same case but a little modifications, and FINAL!!! i spent much money i will wait now for something revolutionary for my next pc built. bye and tks again ;)
Add your own comment

50 Comments on NOS - Final Mod

#1
Random Murderer
The Anti-Midas
wow, is that what the inside of the cpu block looked like before you cleaned it?
Posted on Reply
#2
Neohazard
Yea man i clean it with "Listerine" a bucal anticeptic and bactericid
Posted on Reply
#3
Random Murderer
The Anti-Midas
NeohazardYea man i clean it with "Listerine" a bucal anticeptic and bactericid
lol, toothpaste? that's what i use to clean my copper heatsinks as well. works as a polishing compound too!
Posted on Reply
#5
Neohazard
That thing its not a toothpaste its the azinavre!!! the things who makes corosion!!!
Posted on Reply
#6
tzitzibp
fantastic work friend.... 10/10!

i enjoyed viewing the pictures one by one...
thanks for that!
Posted on Reply
#7
Neohazard
tzitzibpfantastic work friend.... 10/10!

i enjoyed viewing the pictures one by one...
thanks for that!
tks for the vote
Posted on Reply
#8
Neohazard
gamerxprovery well good job dude its really clean 10/10 i would give you more (if i could) :)
tks for the vote and coments are welcome bye ;)
Posted on Reply
#9
-2kill-
Your wire management is second to none. That is one of cleanest looking interior shots I've seen cable wise. 10/10.
Posted on Reply
#10
Neohazard
-2kill-Your wire management is second to none. That is one of cleanest looking interior shots I've seen cable wise. 10/10.
Tks for the coments did u vote 9 or 10? bye ;)
Posted on Reply
#12
erocker
*
This puts the rest of the gallery to shame. It's is a work of art. 10/10!
Posted on Reply
#14
Neohazard
OD-ChurchI voted 2/10 because:

case?
When i sad case = rig for me and a case for u means what? justfie u vote please i need it ;)
Posted on Reply
#15
Neohazard
GodSonThe inside is as good as it gets but where are the pics of the case. Come vote for mine www.techpowerup.com/gallery/1171.html
The Pics of the case are in other link named ""NOS"" its the same case, not diferent, except the interior. and u vote the note???. tks man i vote in u rig yet ;) bye
Posted on Reply
#16
Neohazard
erockerThis puts the rest of the gallery to shame. It's is a work of art. 10/10!
Tks for the vote and the coment bye ;)
Posted on Reply
#17
steelkane
10 from me,, Very nice and clean, did you rob a bank for that cpu,,LOL, I really like the way you setup your hard drives, TOP NOTCH INDEED!!!
Posted on Reply
#18
Neohazard
steelkane10 from me,, Very nice and clean, did you rob a bank for that cpu,,LOL, I really like the way you setup your hard drives, TOP NOTCH INDEED!!!
tks for the coments and for the vote bye ;)
Posted on Reply
#19
EnergyFX
That is very impressive cable managment for the amount of hardware you have in your system. I admire that you used larger than standard wire size to feed the HDDs.

Good job... I can tell you put a lot of hard work into it!
Posted on Reply
#20
Neohazard
EnergyFXThat is very impressive cable managment for the amount of hardware you have in your system. I admire that you used larger than standard wire size to feed the HDDs.

Good job... I can tell you put a lot of hard work into it!
tks for the coments and for the vote too bye;)
Posted on Reply
#21
Arrakis9
I voted 5/10 because:

dosent look like you did very much from the last post and becuase you still use ps/2
Posted on Reply
#22
Neohazard
Arrakis+9I voted 5/10 because:

dosent look like you did very much from the last post and becuase you still use ps/2
Nice justification a 5 because i use a PS/2 conection and u use what kind of conection USB or PS/2 or the old AT standard. Please give a decent justification is simple if u sad i dont like it or i dont see nothing diferent and if u dont know i had 75 votes in my last rig and many people here dont know whats the diference of case and rig. please reavaliate u answer ok bye
Posted on Reply
#23
SMACK900
Fantastic work as always 9/10 from me
Posted on Reply
#24
Neohazard
SMACK900Fantastic work as always 9/10 from me
tks for the vote bye ;)
Posted on Reply
#25
Widjaja
Do you only come to this forum to showoff your rig?
I notice you don't participate in anything else her and you've been here for quite a while.
You must have some decent knowledge to share with us judging from all you modifications.

I mean. . . . .tks for the vote bye ;)
Your'e like an automated message when someone gives you an excellent rating.

I would like to see some benchies before I give you a rating.
Posted on Reply
#26
GruntOrama
Very nice, I'd like to see some outside shots of the case rather than all interior though.
Posted on Reply
#27
Neohazard
WidjajaDo you only come to this forum to showoff your rig?
I notice you don't participate in anything else her and you've been here for quite a while.
You must have some decent knowledge to share with us judging from all you modifications.

I mean. . . . .tks for the vote bye ;)
Your'e like an automated message when someone gives you an excellent rating.

I would like to see some benchies before I give you a rating.
Sorry if i dont coment in the rest of forum,i try my best and its very dificult to me to enter in some discusions with my pour english and many time i dont understand few articles because my tecnical english its not good, but now i will try to share knowledge with all.

its funny wen u sad automated message but its the way i grats for the coments and for votes.

in this weekend i will make some test and benchs and i will send for u and all but im happy that u come and give me u opnion and u sincerely about my person. tks man
Posted on Reply
#28
Neohazard
GruntOramaVery nice, I'd like to see some outside shots of the case rather than all interior though.
if u wana saw outside pics likes from the case u can enter in ""NOS"" www.techpowerup.com/gallery/1034 there are many pics from outside my case and i dont change anything outside but in interior i change many things like cables and i put more hardware than i could.
Posted on Reply
#29
OD-Church
I voted 2/10 because:

not really a case..
Posted on Reply
#30
Neohazard
OD-ChurchI voted 2/10 because:

not really a case..
if this is not a case WTF is this!!! answer me.
Posted on Reply
#31
Widjaja
Pfft..
Pay no attention to him.
Your rig pisses a buckets worth all over his.

Everytime I see it I just think ferk thats cool.
10/10 from me but still I'd like to some benchies.

btw my vote also knocked out his 2/10 rating.
Posted on Reply
#32
Nemesis881
9/10 just because it would be perfect if their was some nvidia cards in there ;). Everything else is flawless.
Posted on Reply
#33
Chewy
Fantastic job I give you a 9/10, maybe I would give you a 10/10 if you had some open door side views. Looks like good work, I just like seeing the whole picture of whats going on.
Posted on Reply
#34
Neohazard
Nemesis8819/10 just because it would be perfect if their was some nvidia cards in there ;). Everything else is flawless.
tks for the vote and only ATI cards is possible here and only for cross fire too ;) tks again
Posted on Reply
#35
Neohazard
WidjajaPfft..
Pay no attention to him.
Your rig pisses a buckets worth all over his.

Everytime I see it I just think ferk thats cool.
10/10 from me but still I'd like to some benchies.

btw my vote also knocked out his 2/10 rating.
tks man i apreciate this ;)
Posted on Reply
#36
Neohazard
ChewyFantastic job I give you a 9/10, maybe I would give you a 10/10 if you had some open door side views. Looks like good work, I just like seeing the whole picture of whats going on.
Tks for the vote and for the coments too, maybe u dont saw the last post there are snaps from side too


"if u wana saw outside pics likes from the case u can enter in ""NOS"" www.techpowerup.com/gallery/1034 "

bye and tks again
Posted on Reply
#38
Polaris573
Senior Moderator
OD-ChurchI voted 2/10 because:

case?
I think you need to explain your vote some more if you are going to vote that low. Especially since there is a case.
Posted on Reply
#40
Neohazard
erockerNeo, why don't I see any 3dMark06 scores out of you? Please post them here! forums.techpowerup.com/showthread.php?t=25995
I need to do some benchs and i find a issue in GA-X38-DQ6 when i stablize the issue i will make it and send it to u ok

OBS: X38-DQ6 have issues when 4 DRAM banks are populated and bios F7F its not official but can correct most of BIOS issues
Posted on Reply
#41
erocker
*
NeohazardI need to do some benchs and i find a issue in GA-X38-DQ6 when i stablize the issue i will make it and send it to u ok

OBS: X38-DQ6 have issues when 4 DRAM banks are populated and bios F7F its not official but can correct most of BIOS issues
For the best benchmark you can get, I'd run it with 2 sticks of memory in XP! Either way good luck!
Posted on Reply
#42
Neohazard
erockerFor the best benchmark you can get, I'd run it with 2 sticks of memory in XP! Either way good luck!
Did u use only 2 sticks??? I understand if u use 4 sticks the benchs could be more impressive than 2 but we can do this with 2 and 4 sticks right

bye
Posted on Reply
#43
Chewy
Since your not into overclocking Im not sure if having 4 stick would hurt your performance, now with 2 sticks you can get a higher FSB front side bus, when overclocking.
Posted on Reply
#44
Abdullahamir
good computer specs

hey i liked ur computer very much
Posted on Reply
#45
trickson
OH, I have such a headache
Very nice ! 9/10 great setup !
Posted on Reply
#46
tkpenalty
10/10

(i thought i already voted o.o)
Posted on Reply
#47
Unregistered
Very nice case built with good taste...except you missed it by one point, where is the side panel/window???
#49
mdashoot
thats a 10/10 from me, very cool build.
Posted on Reply
Add your own comment
Nov 18th, 2024 23:36 EST change timezone

New Forum Posts

Popular Reviews

Controversial News Posts