Gelid Solutions today announced the release of the new Amber Controller Unit. The Amber 8 Pro is a product of GELID Solutions's Amber product line. Featuring 366 preprogrammed RGB lighting modes, Amber 8 Pro controls up to 8 fans, 10 LED strips, or other Addressable RGB (ARGB) devices. It comes with 21-key RF Remote Control for convenient operation, PWM input for seamless PWM controls and SATA Power Connector for stable power output.

Also, the RF remote control can be used to control the speed of the PWM fans. Built-in magnets make installation as quick as a few seconds. When connected to compatible motherboards, ASUS, MSI, or ASRock, ARGB hub functionality can also be accessed via the 3 Pin ARGB Sync input. In order to provide reliable power output, SATA power connectivity is used, which delivers 85 W maximum power and supports ARGB devices with up to 120 LEDs onboard each channel to illuminate and control.

SilentiumPC, the European manufacturer of CPU coolers, Power Supply Units and PC cases, extends its PC accessory lineup by introducing the Nano-Reset Remote ARGB KIT. This complete kit is perfectly equipped to control devices with addressable ARGB backlighting using a remote control. The Nano-Reset Remote ARGB KIT can be easily applied to the fan backlight, or ARGB LED strips even without having a motherboard with ARGB support. The included splitter can simultaneously control the lighting of four different devices, connected by the standard 3-pin ARGB connectors in 2+1 pin with a 5 V design.

The setup is simple and requires the user to merely connecting the Nano-Reset Remote ARGB controller to a SATA power connector of the power supply and then plugging in the designated ARGB devices to the 2+1 pin connector. The remote control communicates using radio technology, and unlike the infrared versions, it does not require visibility of the remote control with the receiver. In addition to that, it is also possible to control the ARGB illumination by pressing the RESET button of the PC case after connecting the RESET 2-pin cable to the Nano-Reset Remote ARGB controller. The system remembers the last chosen lighting mode setting even after the PC was shut down.

Tech innovator GELID Solutions unveils the latest 5-channel RF Remote ARGB controller. The AMBER5 is a product of GELID Solutions GAMER product line. The AMBER5 controls up to 5 fans, strips or other Addressable RGB (ARGB) devices and boasts 366 vivid lighting presets spanning a carefully selected collection of pre-programmed RGB modes and dynamic effects. It comes with the 21-key RF (Radio Frequency) Remote to provide reliable and responsive remote control in the range of 8 meters. For stable power output, the SATA power connectivity is utilized which delivers up to 85 W maximum power and supports ARGB devices with up to 120 LEDs onboard to lit up and control on each channel.

The AMBER5 also supports a passthrough ARGB Sync/Hub Mode via the ARGB Sync Cable equipped with the standard 3-pin ARGB connector (ASUS Aura) and VDG connector (GIGABYTE/AORUS RGB Fusion) compatible to all modern motherboards featuring RGB. You are free to use the controller presets or switch to your own presets designed in your favorite RGB software. The AMBER5 can be installed inside or outside your PC just in seconds thanks to the built-in magnet. Additionally, the adhesive Sticky Pad is also included to facilitate installation in aluminium-made or non-metallic PC chassis.

The European PC case and cooling manufacturer SilentiumPC, expands its ring-type RGB fan series by adding the bigger 140 mm version. The Corona HP RGB series offers a very delicate and smooth RGB illumination thanks to the embedded LEDs in the ring. Features like the HBS (Hydraulic) bearing and the built-in anti-vibration rubber grommets, allow the Corona HP RGB 140 to be used as a versatile case fan and to be the perfect match for air coolers and radiators of water-cooling systems. SilentiumPC supports such larger fan setups by offers the Corona HP RGB 140 as a 3-pack bundle in addition to the regular single fan package.

Phanteks today introduces its newest addition to the Eclipse lineup, the P400A. With engineering improvements, Phanteks is able to explore new ways to deliver a new level of airflow performance with the P400A. The P400A offers a stunning new ultra-fine, high airflow metal mesh front panel design that combines style with performance.

The P400A breathes performance and is packed with features including a spacious open interior, extensive storage options, and integrated Digital-RGB solution (Digital Version). Offering more performance out of the box, the P400A support upgrades like vertical GPU placement and up to 8x HDD positions. Whether customers prioritize aesthetics or performance, the P400A delivers.

TEAMGROUP's numerous products with great features have successfully attracted attention from around the world. In addition, two products with exclusive patents are released today as well, they are T-FORCE CARDEA Liquid water cooling M.2 PCI-e SSD and T-FORCE CAPTAIN RGB Control Box. T-FORCE CARDEA Liquid M.2 PCI-e SSD is the world's first solid state drive that combines water cooling and M.2. This innovative new product uses self-circulation cooling to lower the temperatures effectively. T-FORCE CAPTAIN RGB Control Box has 4 5V ARGB output connectors and one 12 V RGB output connector. Moreover, it supports multiple devices so the style is switchable with any combination when building yourself a PC and a variety of lighting effects can enhance the atmosphere. The two new T-FORCE products released today have exclusive patents. They are both innovative and unique, and TEAMGROUP's strength in research and development is displayed through them.

T-FORCE CARDEA LIQUID is the world's first, water cooling M.2 PCIe solid state drive specially built for gaming and high-performance PC. The crystal -clear outer casing structure, and T-FORCE LOGO's metal trim and the sliding rail design (Taiwan Utility Model Patent No. M574264) are the perfect combination of craftsmanship and style. After TEAMGROUP laboratory's testing and burn-in tests, by using the concept of self-circulation cooling effect, this product is proven it can effectively lower the temperature down 10 degrees. T-FORCE CARDEA LIQUID has PCIe Gen3 x4 high speed interface. The read/write speed is up to 3400/3000 MB/s, and random read/write speed is up to 450K/400K IOPS. In addition to the effective cooling effect which can keep the system stable, its excellent performance is also reliable. This year, it not only won the COMPUTEX d&i award, but it was also praised by everyone during its first appearance at the COMPUTEX 2019.

LIAN LI Industrial Co. Ltd., a world leading manufacturer of aluminum chassis and peripherals, is proud to unveil the latest addition to its family of well-received RGB fan with the BORA Digital. Following the great success of the BORA and BORA Lite cooling fans, the price competitive BORA Digital is here to dominate in style with 3 frame finishes, built-in 12 addressable LEDs customizable via a RGB controller (or motherboard), and one of the most silent performances in the field, thanks to its adjustable speed and fluid dynamic bearings.

The farbwerk nano from Aqua Computer is a tiny USB powered RGB LED controller. It is capable of controlling 90 addressable RGB LEDs and offers unique new functions that also include a light sensor. With the integrated button it can be simply switched on and off, stored profiles can be changed by double-clicking the button and the brightness of connected LED strips can be adjusted by pressing it for a longer time. Much work has been invested in the powerful aquasuite control software. As in a video editing program, up to 20 controllers can be freely assigned, moved, copied and even cloned to areas on the LED strips using drag & drop. A newly developed technology that Aqua Computer describes as ALPHApx allows for the first time to freely combine many different effects through transparency in different layers.

Another highlight is the AMBIENTpx feature. This beautifully programmed intelligent backlight for monitors can now cover almost any panel size with up to 90 LEDs. If more LEDs are required, one can combine several farbwerk nano. The analyzed image areas can be configured and AMBIENTpx also features a filter to ignore the letterbox in videos. When it comes to video and sound, the farbwerk nano is really strong. With special Sound-to-Light effects, level indicators and effects controllable via sound, there are incredible possibilities to set sound on stage.

The new Kolink Phalanx is a great value midi-tower that comes with a range of comprehensive features, perfect for builders of all experience. The Phalanx comes with a brushed aluminum front panel, offering a customisable display through it's central mesh air-intake via four pre-installed 120mm RGB fans. These offer a full out of the box air cooling solution, as well as the ability to cycle through a range of colours using the RGB controller on it's top mounted I/O panel. Should you wish to watercool your build there's radiator slots for a 280/240mm top mount, 240mm front mount and an additional 120mm rear mounted radiator.

Internals are easily accessed by a hinged tempered glass side panel, making building a hassle free experience, with an angled motherboard mount for easy cable management. There's also a vented PSU shroud to cover components and cable management in the lower compartment, with cable routing for minimal exposure in the full build.

Thermaltake, a leading brand in PC cooling solutions, today released the latest all-in-one liquid cooling product- Water 3.0 ARGB Sync Edition Series. The Water 3.0 ARGB Sync Edition Series comes with three different versions including 120 ARGB Sync Edition with one 120 mm fan, 240 ARGB Sync Edition with two 120 mm fans, and 360 ARGB Sync Edition with three 120 mm fans.

Cooler Master, a global leader in manufacturing CPU coolers, computer components and peripherals, introduces its first 360mm all-in-one (AIO) liquid CPU cooler. The MasterLiquid ML360R features addressable RGB LEDs on both the fans and water block and is certified compatible with ASUS, MSI and ASRock motherboards.

The MasterLiquid ML360R RGB features Cooler Master's newly designed pump with 12 addressable RGB LEDs on the water block and eight addressable RGB LEDs on each fan, capable of 16.7million color options. Users can easily customize each LED, individually, through the addressable RGB software from ASUS, MSI and ASRock motherboards, or with Cooler Master's MasterPlus+ software for complete ambient control.

Swiftech is proud to announce the latest advances in All-in-one Liquid Cooling CPU Cooler, the Drive X3. The new X3 AIO series has received a number of improvements, along with a new sizing and naming convention as well.

The Swiftech X3 will be available in two radiator sizes, dual 120mm fans and triple 120mm fans at the time of the release. These will include a new 120mm fan design that include improved static pressure and maximum discharge, lower operation noise level, and Swiftech IRIS compatible addressable RGB's built into the frame of the fans.

Cooler Master today launched a new addition to its flagship, four-heatpipe coolers - the MasterAir MA410M. Equipped with dual 120 MasterFans, it continues the tradition of recognizably excellent cooling performance and reliability from the Hyper series.

The heatsink is precisely designed, ensuring the spacing between each fin of the tower is at the optimal distance to guarantee minimal airflow resistance and thus allowing maximum air into the heatsink. The MA410M is equipped with Continuous Direct Contact Technology 2.0 (CDC 2.0), which means all the four heatpipes are compressed to increase CPU contact surface area - this significantly increases thermal conductivity and heat transfer. The patented X-vents and Air-Guided Armor combined with CDC 2.0 technology provide the best thermal solution for your build.

Phanteks today announced the availability of the new Digital RGB product line up. Featuring High Quality and High Density LED chips for the smoothest color gradiants and vibrant colors. The controller lets you choose between the many stylish color profiles with an easy to use remote. Digital RGB from Phanteks is simply plug-and-play with the highest lighting quality.

Thermaltake, a leading premium gaming tower manufacturer, announced the immediate availability of Thermaltake View 37 RGB Edition and View 37 Riing Edition Mid-Tower Chassis. Constructed with a gull-wing window panel for internal components show-off, the View 37 Series delivers a sleek look to complement its excellent cooling. View 37 RGB Edition is preinstalled with 3 built-in Riing Plus 140mm Hardware Control fans, a Riing Plus RGB controller and a PCI controller to deliver 256-color RGB illumination and unparalleled ventilation.

More custom RGB lighting possibilities are permitted thanks to its light synchronization with enthusiasts' favorite RGB motherboard brands: Asus AURA SYNC/ Gigabyte RGB Fusion/MSI Mystic Light Sync-enabled motherboards. As to View 37 Riing Edition, it features 2 built-in Riing 14 LED Blue fans to illuminate and dissipate heat more properly. The duet doesn't disappoint when it comes to cooling potential and flexibility, with its ability to accommodate up to 8 case fans, including up to two large 200 mm fans at the front.

At its 2018 International CES booth, Phanteks showed off four new RGB LED product lines, beginning with the Digital RGB Controller and Digital RGB Expansion Hub. The Digital RGB Controller lets you put out three RGB headers with a manual control pod that gives you color, brightness, and light modes with a 3-button wired remote pod. You can also connect this controller to a USB header for software control (via Aura Sync, Mystic Light, etc.). The RGB/D-RGB Expansion Hub lets you connect an addition four RGB headers by taking in two upstream inputs (D-RGB and RGB), and power from SATA-power. You can expand up to 5 meters of RGB LED-strips, and connect up to 8 D-RGB products from Phanteks.

The company also unveiled 40 cm long RGB LED strips that come with 30 diodes, each. These strips come with 3M adhesive tape on one side, and silicone casing on the other, and are rated by its makers to be water-resistant. Each pack of the Digital-RGB LED strip comes with two 40 cm strips, which each take in standardized D-RGB inputs. Lastly, there's the Halos Lux RGB digital fan frame, which lets you convert any 120 mm fan into an RGB LED-lit fan, so you can light up your favorite (and expensive) SanAces or Noctuas. You attach the frame ideally along the intake end of your fan, and bolt it in place. 30 diodes project a smoothly transitioning lighting onto your impeller. The body of the frame is made of aluminium. It takes in standardized D-RGB input. The RGB/D-RGB controller hub is priced at USD $24.99, the RGB/D-RGB Expansion hub at $19.99, the Halos Lux Digital 120/140 at $$19.99/21.99, respectively; and LED strips (pack of 2) at $19.99.

As a brand, BitFenix is best known for unique PC cases and modding accessories, always striving to provide high-quality PC components and offering diversity for modders and gamers alike. Today, BitFenix is proud to announce its latest addition to the Spectre fan series, the Spectre Pro RGB.

As a direct successor to the Spectre Pro, the Spectre Pro RGB is a high performance silent fan, featuring a high-pressure CFM design for maximum pressure and airflow, delivering a torrent of air to keep systems cool. It is equipped with reinforced fan-blades to assure they resist warping even while spinning at high-speed for long durations, thus providing durability and longevity. The fluid dynamic bearing technology will keep the fan silent, even during heavy load.

Cooler Master, a leader in PC components and peripherals, introduces RGB enabled all-in-one liquid cooling: MasterLiquid ML240L RGB and MasterLiquid ML120L RGB. Both models have full RGB effects on both the fan and pump, which comes with a controller and RGB splitter cable for quick setup or alternatively sync seamlessly with ASUS, MSI, Gigabyte and ASRock motherboards.

The ML240L RGB and ML120L RGB comes with the dual chamber RGB pump for increased reliability and provide a perfect balance of low noise levels at optimal performance. The aesthetic design of the low resistance radiator shows premium build and attached is the MasterFan MF120R RGB (2 included for the M240L RGB). The double layer tubing with sleeved on the outside and FEP on the inside for robust usage.

Cooler Master has quietly added to their product pages three new 120 mm Fan models, and two additional renditions of the same fans in 140 mm size. The new 120 mm fan models all belong to the MasterFan Pro product line, but are available with three different design philosophies according to users' particular needs: there's an AirFlow model, an AirPressure one, and a Air Balanced one. The names are pretty explicit as to the specific use cases easch fan has been designed for. All of these fan models come equipped with a Red, Blue, or RGB toggle built-in, so users get some measure of choice without acquiring the new C10L fan controller the company has also launched. There's also support for ASUS' Aura Sync, MSI's Mystic Light, ASRock's RGB, and Gigabyte's RGB Fusion software suites on select motherboards.