The new Core cooler is now compatible with RX 7900 XT(X) GPUs! Alphacool offers with the new coolers not only the usual high quality, but also remarkable performance as well as functional design for AMD Radeon RX 7900 XT(X) graphics cards in custom design. The highlight of the copper cooler is the ensemble of connector terminal and cooler, which is milled from a single piece of copper. The excellent workmanship paired with the hard and resistant chrome plating of the entire copper cooler meet the highest quality standards. A key design element of the new Core series are the brass G1/4" threads, which are left in chrome and integrated on both sides. These stand out visually from the terminal.

The aluminium backplate, which is adapted to the design, forms a unit together with the terminal and convinces with clear and homogeneous optics on the back of the cooler. The individually controllable lighting consists of digitally addressable RGB LEDs and enables the even and dazzlingly colored illumination of the entire cooler.

Eiswolf 2 AiO - now also for custom designs of RTX 4080/4090 and RX 7900XT/XTX GPUs! Alphacool presents additional innovative solutions for cooling Nvidia's Geforce RTX 4080 and 4090 and AMD's RX 7900XT/XTX graphics cards.

The enormous waste heat of the new graphics card generation is excellently dissipated with these coolers. The very good water flow and the large cooling surface are due to the particularly filigree fin structure. The jet plate with revised inflow engine also distributes the water perfectly on the cooling fins. The complete chrome plating of the cooler not only provides resistant protection against acids, scratches and damage, but also achieves a beautiful homogeneity and remarkable shine. The Aurora design of the cooler is kept visually calm and simple. This is evident not only in the cooler's design, but also in the wonderfully even lighting achieved via digitally addressable RGB LEDs.

Following the successful introduction of the industry's first 8GB R9 290X graphics card with its Vapor-X model, SAPPHIRE Technology has just announced another 8GB card sporting the highly acclaimed SAPPHIRE exclusive Tri-X triple fan cooler, enhanced clocks and dual BIOS, making the large frame buffer option available at a slightly lower cost.

The SAPPHIRE R9 290X Tri-X 8GB features the latest GCN (graphics core next) architecture from AMD with 2816 stream processing units and an enhanced engine clock of up to 1020 MHz. It is equipped with 8 GB of the latest high performance GDDR5 memory on a 512-bit interface and now clocked at 1375 MHz (5.5GHz effective) delivering higher bandwidth than earlier models. Built on a SAPPHIRE original pcb, the layout incorporates a 6-phase power design delivering up to 240 watts (40 watts per phase) for maximum performance. Two 8-pin power connectors ensure adequate system power is available (up to 375 Watts total including PCI-Express power).

SAPPHIRE technology, the leading manufacturer and global supplier of AMD-based graphics products, has just announced an exciting new model in the successful R9 series of graphics cards. The SAPPHIRE R9 290X 8GB Vapor-X OC adds an industry leading 8GB frame buffer to the company's award winning cooling technologies and a factory overclock to deliver best in class performance with very low noise.

Based on the award-winning Graphics Core Next (GCN) architecture from AMD with 2816 Stream Processors, the SAPPHIRE R9 290X Vapor-X is an Overclocked edition which boasts 8GB of the latest GDDR5 memory running at 1375MHz (5.5GB/s effective) and high speed engine clocks of 1030MHz. Together these clocks deliver industry leading performance - but to achieve this performance with stability and reliability demands high quality components throughout the design (especially in the power control circuitry) together with a sophisticated cooling solution.

EK Water Blocks, Ljubljana based premium computer liquid cooling gear manufacturer, is proud to introduce a new Full-Cover water block for Sapphire AMD Radeon R9 290(X) graphics cards with amended (non-reference) Vapor-X circuit board design.

EK-FC R9-290X VaporX directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. Additionally this water block also directly cools exposed copper drain on the circuit board to achieve best cooling possible. The cooling engine features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps.

Sapphire unveiled a factory overclocked version of the mainstream Radeon R7 250X Vapor-X graphics card it launched back in February, the Radeon R7 250X GHz Edition. Based on the same exact board design, featuring the same dual-fan Vapor-X cooling solution as its predecessor, the GHz Edition card features clock speeds of 1000 MHz core, and 4.80 GHz (GDDR5-effective) memory; compared to reference clock speeds of 925 MHz core and 4.50 GHz memory. The card takes in power from a single 6-pin PCIe power connector. Display outputs include two dual-link DVI, and one each of HDMI 1.4a and DisplayPort 1.2. Based on the 28 nm "Cape Verde" silicon, the Radeon R7 250X features 640 stream processors, 40 TMUs, 16 ROPs, and a 128-bit wide GDDR5 memory interface. This card features 2 GB of it.

SAPPHIRE technology, the leading manufacturer and global supplier of AMD-based graphics products, has just added another new model to its highly acclaimed Vapor-X family of graphics cards in the successful R9 series. The SAPPHIRE R9 290X Vapor-X OC features several of the company's industry-leading technologies and a factory overclock to deliver best in class performance with very low noise.

Based on the award-winning Graphics Core Next (GCN) architecture from AMD with 2816 Stream Processors, the SAPPHIRE R9 290X Vapor-X is an Overclocked edition which boasts 4 GB of the latest GDDR5 memory running at 1410 MHz (5.64 GB/s effective) and high speed engine clocks of 1080 MHz. Together these clocks deliver industry leading performance - but to achieve this performance with stability and reliability demands high quality components throughout the design (especially in the power control circuitry) together with a sophisticated cooling solution.

SAPPHIRE technology, the leading manufacturer and global supplier of AMD-based graphics products, has just announced an exciting new model in the successful R9 series of graphics cards. The SAPPHIRE R9 290 Vapor-X OC features several of the company's industry-leading technologies and a factory overclock to deliver best in class performance with very low noise.

Based on the award-winning Graphics Core Next (GCN) architecture from AMD with 2560 Stream Processors, the SAPPHIRE R9 290 Vapor-X is an Overclocked edition which boasts 4 GB of the latest GDDR5 memory running at 1400 MHz (5.6 GB/s effective) and high speed engine clocks of 1030 MHz. Together these clocks deliver industry leading performance - but to achieve this performance with stability and reliability demands high quality components throughout the design (especially in the power control circuitry) together with a sophisticated cooling solution.

Here it is, the first consumer (non-professional) graphics card with a staggering 8,192 MB (8 GB) of video memory. Sapphire is giving final touches to the Radeon R9 290X Toxic, which features 8 GB of memory across the GPU's 512-bit wide GDDR5 memory interface. In addition to that, the card is said to feature a massive factory-overclock, which could give it a shot at the performance crown from NVIDIA's GTX TITAN Black. The card features a large vapor-chamber equipped cooling solution in sexy black + yellow. The Toxic isn't going to be Sapphire's only R9 290X cards with 8 GB memory. There's also the R9 290X Vapor-X 8 GB, which goes easy on the factory-overclock, and probably OC headroom, but features the same cooling solution as the one on the Toxic, albeit with a different color scheme. Sapphire could launch the two on the backdrop of GDC.

SAPPHIRE Technology has just announced two new models in the successful R-series of graphics cards, bringing the company's industry leading cooling technologies into the mainstream. The SAPPHIRE R7 250X Vapor-X and SAPPHIRE R7 250X are based on the successful graphics GCN (Graphics Core Next) architecture from AMD and deliver advanced features at new affordable price levels.

The SAPPHIRE R7 250X Vapor-X has 1 GB of the latest DDR5 memory clocked at 1300 MHz (5.2 GB/s effective) and a GCN architecture with 640 stream processors and core clocks of 1100 MHz to deliver new levels of performance in its price segment. It features a dual fan SAPPHIRE exclusive Vapor-X cooler, which delivers quiet and efficient cooling even under load. SAPPHIRE pioneered the use of Vapor Chamber cooler technology in graphics cards and has received industry acclaim for its use in previous models.

If reviews of the Radeon R9 290X showed anything other than that it's fast enough to make the GTX TITAN look like a bad choice, it's that it's hot and noisy, and that the reference design cooling solution is hopelessly inadequate at keeping the temperatures and noise in check. At some point in the future, AMD was going to allow its add-in board (AIB) partners the freedom to launch non-reference design Radeon R9 290X, or at least cards with custom-design cooling solutions. That point is closer than we think, and could be as early as late-November, according to a SweClockers report.

According to the report, AMD's AIB partners will launch R9 290X graphics cards with custom-design air- and liquid-cooling solutions by late November, 2013. It's when the likes of DirectCU II, WindForce 450W, TwinFrozr IV, Vapor-X, and IceQ X2 will begin to associate with even the most basic R9 290X cards (which start at $549.99). AMD's R9 290X is currently available in only two SKUs, both of which are based on the AMD reference cooler design; the $549.99 standard edition, and the $569.99 Battlefield 4 Edition, which includes an Origin-redeemable key to Battlefield 4 (standard edition).

Sapphire announced a large contingent of Radeon R9/R7 series products, including three Radeon R9 280X products, the base model Dual-X, Vapor-X, and the Toxic. The three feature three different grades of factory-OC, and are priced in the range of $299 and $349. The Radeon R9 270X family from Sapphire is just as exhaustive, with three models with the same brand-extensions, priced in the range of $199 and $239. The rest of Sapphire's lineup includes R7 260X, R7 250, and R7 240 SKUs.

In a bid to capture market share in the crucial Chinese Lunar New Year shopping season across the Greater China region, Sapphire launched a new graphics card occupying a price-point most tempting to value-conscious buyers, the Radeon HD 7770 Vapor-X Black Diamond. Simply put, it's a Radeon HD 7770 GHz Edition card with an advanced vapor-chamber-based cooler strapped on to it, with some groovy black styling dropped in; all of which shouldn't cost Sapphire much, but ups product presentation greatly. It is a slight variation of the Vapor-X OC found in western markets.

The Sapphire HD 7770 Vapor-X Black Diamond uses a Vapor-X cooler which uses a vapor-chamber plate and two 8 mm-thick copper heat pipes to draw heat from the GPU, and conduct it to a dense aluminum fin stack, which is ventilated by a pair of 80 mm spinners. Underneath it is a custom-design PCB that's dressed in black, and uses Sapphire's noise-free chokes. The card sticks to AMD reference clock speeds of 1000 MHz core and 1250 MHz (5.00 GHz GDDR5-effective) memory. It packs 1 GB of GDDR5 memory across a 128-bit wide memory interface. Power is drawn from a single 6-pin PCIe connector. Display outputs include two DVI, and one each of DisplayPort and HDMI.

This card is only available in China.

Sapphire officially launched the Vapor-X CPU cooler it talked about at trade shows earlier this year. It uses a vapor-chamber plate to draw heat from the CPU, and convey it to four 7 mm-thick nickel-plated copper heat pipes, which then pass through a dense aluminum fin stack, that's ventilated by two 120 mm PWM controlled fans (replaceable) in push-pull configuration. Spinning at speeds ranging between 495 and 2,200 RPM, the fans push 77 CFM of air, each. Measuring 135 x 110.4 x 163.5 mm, the heatsink weighs about 925 g. Nearly every modern client CPU socket type is supported, including Intel sockets LGA2011, LGA115x, LGA775, and AMD sockets AM3+/AM3/AM2+/AM2, and FM2/FM1. Expect a sub-$80 price.

Sapphire announced a new graphics card model based on AMD's revitalized Radeon HD 7950 Boost GPU. The card combines the new HD 7950 Boost with Sapphire's Vapor-X dual-fan cooler which has been used the likes of HD 7970 GHz Toxic 6 GB. The card even features an out-of-the-box OC. While AMD's new specifications dictate 850 MHz core with 925 MHz Boost frequency, Sapphire's BIOS runs the card at 850 MHz core with 950 MHz Boost frequency. The card packs 3 GB of GDDR5 memory across a 384-bit wide memory interface, clocked at 5.00 GHz.

Sapphire HD 7950 Boost Vapor-X OC uses a reasonably powerful VRM that draws power from two 8-pin PCI-Express power connectors. The Vapor-X cooler uses a large vapor-chamber plate that draws heat from the GPU and memory, and quickly transports it to the primary heatsink. Two 8 mm-thick and two 6 mm-thick heat pipes lend a hand. The heatsink is ventilated by a pair of 90 mm fans. Sapphire's HD 7950 Boost Vapor-X OC is expected to be priced around US $350.

SAPPHIRE Technology has now added two new Vapor-X Models to its HD 7970 series of high performance graphics cards based on the latest HD 7970 GHz Edition GPU from AMD.

The SAPPHIRE HD 7970 6GB Vapor-X Edition shares many of the features of the recently announced industry-leading TOXIC Edition. Its 6GB frame buffer makes it ideally suited to multi-screen gaming as well as providing the extra memory required for demanding professional applications such as content creation, video editing or rendering.

SAPPHIRE Technology has just announced its HD 7970 6 GB TOXIC Edition graphics card boasting the highest clock speeds in its class and believed to be the fastest single GPU graphics card in the world.

The SAPPHIRE HD 7970 6 GB TOXIC Edition is based on the latest HD 7970 GHz Edition GPU from AMD, together with a host of industry first and exclusive features to deliver maximum performance. Its unique 6 GB frame buffer is a World first for a consumer graphics card and makes the TOXIC Edition ideally suited to multi-screen gaming as well as providing the extra memory required for demanding professional applications such as content creation, video editing or rendering.

Following the announcement by AMD of the availability of the HD 7970 GHz Edition, the latest product using its highly acclaimed Graphics Core Next (GCN) architecture, SAPPHIRE Technology, one of the World's leading manufacturers and a global supplier of graphics cards, is happy to announce that this latest generation of GPUs from AMD will form the basis of several cutting edge new models.

Within the next few weeks, SAPPHIRE will introduce the eagerly awaited TOXIC Edition and Vapor-X models in its HD 7970 family. The TOXIC Edition is a limited edition factory overclocked model - delivering best in class performance and targeted at the enthusiast. The Vapor-X models use SAPPHIRE's exclusive Vapour Chamber cooling technology to deliver optimised performance whilst retaining low noise and cool operation.

Sapphire HD 7770 Vapor-X OC Edition is the first card based on the revolutionary new graphics GCN (Graphics Core Next) architecture from AMD to feature the SAPPHIRE exclusive and world acclaimed Vapor-X cooling technology.

The Sapphire HD 7770 Vapor-X OC Edition is the first card in this generation to use the Sapphire exclusive implementation of Vapor chamber cooling technology. Previous products with Vapor-X have received world wide acclaim for delivering very efficient cooling that allows the card to run at higher speeds but with very low noise levels. Based on the latest GPU technology from AMD, the Sapphire HD 7770 Vapor-X OC Edition has 1 GB of the latest DDR5 memory, and is factory overclocked with core clocks of 1100 MHz and memory clocks of 1300 MHz (5.2 GB/s effective) to deliver excellent performance.