A Closer Look

The Corsair Vengeance RGB modules are available in white and matte black. The sample we received is the white version, Having both variations for consumers to choose from means Corsair can support different type of computer builds. The appearance takes inspiration from the DDR4 Vengeance Pro and RT lines, with a few minor alterations. Because this is the RGB version, the DIMMs height is increased to accommodate the additional LEDs and light diffuser.


The Vengeance logo is centered across a bushed aluminium section. The white and yellow lettering is as expected, following the Vengeance Corsair branding. The memory also a has repeating pattern of triangles that start small on the sides and steadily increases in size towards the center. Unfortunately, this does not show up well in the photos.


On one side of each DIMM module is the identification sticker listing the SKU, rated XMP operating frequency, corresponding voltage of 1.35, and XMP timings. One thing Corsair does well is to include a revision number that quickly identifies which memory ICs are used. Corsair changes this number every time an internal revision is made. So far, this has held true, appreciated among those looking for specific ICs or a matching kit.


Laying the DIMMs on the side, you can see the Corsair logo in the center. This will also be RGB illuminated as well.


The Corsair Vengeance RGB DDR5-6000 kit weighs in at 49 grams on my scale. For Z-height, it is 45 mm rounding up with my calipers.


After taking the heatspreader apart, we see that Corsair once again is using a custom PCB, used exclusively for the Vengeance RGB series so far. While the Corsair Dominator Platinum RGB is similar, the most noticeable difference is how the LEDs are implemented. The Dominator series has the LEDs separated onto a secondary PCB and attached with a ribbon cable. In contrast, the Vengeance RGB has its LEDs on the main PCB instead. The last thing to note here is this Corsair kit does have a thermal pad for all the ICs and critical components. This is extra important for higher voltages accompanying higher memory frequencies.


A closer look at the ICs shows that these are Samsung (K4RAH086VB-BCQK). Currently, Micron, Samsung, and SK Hynix are the three suppliers of DDR5 ICs. When it comes to overclocking, the general consensus is that SK Hynix M-Die provides higher frequencies, scales better with voltage and has the ability to provide low primary timings that are equal, if not better than the rest. While Samsung currently isn't the ideal kit for memory overclocking, they certainly aren't a bad choice either.


With DDR5, one of the major changes is how the motherboard directly provides 5 V to the memory module's PMIC, which is then stepped down and split accordingly. No longer is the motherboard responsible for regulating the voltages seen with DDR4. The PMIC has the part number "APW8502C." A quick search has APENC come up as the manufacturer.