Liquid Flow Restriction

To make things simpler, I have decided to use a CORSAIR Hydro XD5 pump/reservoir combo unit rather than a discrete pump and reservoir. The pump is powered by a direct SATA connection to a CORSAIR HX750 PSU and controlled by an Aquacomputer Aquaero 6 XT. There is a previously calibrated in-line flow meter and Dwyer 490 Series 1 wet-wet manometer to measure the pressure drop of the component being tested—in this case that of each radiator. Every component is connected to the manometer by the way of 13/16 mm tubing, compression fittings, and two T-fittings.


As of the time of this EK GPU block review, I have tested six entries in total. Unless specifically mentioned, every one of them was tested with an accompanying backplate. As that is the majority of them at this time, this will not change in the near future and was done because both Alphacool and CORSAIR include a backplate. All six will have dedicated reviews, and at least two more from Bitspower and Watercool are being tested right now. So keep in mind that the highlighted entry is for the EK-Quantum Vector block and backplate combination.

Of course, I would say that a backplate generally does not matter as far as liquid-flow restriction goes, but this generation has been nuts. Not only have we had some very interesting water blocks come out for the NVIDIA Founders Edition cards, but the hot VRAM on the back of the RTX 3090 PCB has caused enough interest for a couple of companies to offer active backplates for the first time. Aqua Computer might argue they used an active backplate before; however, I would contend that the heatpipe in said backplate was more of a conduit with indirect cooling from the coolant. It is a semi-active backplate at most, and there is nothing wrong with that.

So here we are then, and as far as the EK-Quantum Vector block goes, the flow design coupled with larger microchannels and a smaller number of fins results in relatively low flow restriction. Alphacool adopts a complex flow design that needs to be seen in detail, and CORSAIR uses a modular design that has a skivved GPU core section with lots of fins and smaller channels that ends up more restrictive.