Intel QX6700 Quad-Core Review 14

Intel QX6700 Quad-Core Review

Installation, Overclocking »
We received the test kit at the office in a large brown box. Inside waited some basic instructions, as well as the motherboard with the CPU already mounted, and Intel’s stock heatsink.

Intel QX6700

Intel’s Core 2 Extreme is to be considered the first Quad-core CPU out on the market. Below are its main features:

Brand IDIntel Core 2 Extreme
Processor numberQX6700
Core Frequency2.66 GHz
System bus frequency1066 MHz
TDP130 W
SteppingB-3
Number of CPU cores4
L2 Cache8MB (2x 4MB)
CPUID06F7
Core to bus ratio limit10:1
Max Processor Input Voltage1.350V
PECI EnabledYes
Enhanced Intel Speed Step Technology (EIST)Yes
Extended HALT State (C1E) EnabledYes
Execute Disable Bit (XD) EnabledYes
Intel 64 TechnologyYes
Intel Virtualisation TechnologyYes
Package/SocketFC-LGA775





Well, what is under the heatspreader? Intel’s engineers have managed to squeeze two E6700 cores under one IHS – a marvelous feat that offers quad-core performance today. After all, it makes a lot of sense from Intel’s stand point – instead of spending a lot of money on developing one die with four cores in it, it is much easier to put together two dies, each with two cores. Also, Intel can pick the best E6700 chips for its QX6700 CPUs, and not have to worry about refining the manufacturing process as it would with a whole new core. Worth noting is also the massive amount of L2 cache – 8 MB in total, 4 MB per die, 2 MB per core.

Below, you can see what the two cores look like in real life:


Intel Bad-Axe 2

I won’t go into a lot of detail with the motherboard that was used. It was supplied as part of the test kit, and is Intel’s top-of-the-line motherboard, utilizing the 975X chipset. The Bad-Axe 2 features numerous improvements over its predecessor, mainly in the overclocking segment. Most importantly, it supports Core 2 Quad CPUs.



Our Bad-Axe 2 motherboard was a pre-production sample. This meant that it did not have automatic fan control, so the fan had to be set to a specific percentage in the BIOS. Retail boards can control the fan speed automatically depending on temperature. I also hope that Intel provides a better manual with their retail motherboards, we only received a simple poster explaining the main features and a simplified diagram of how to put together a computer.

Heatsink



We received Intel’s stock heatsink for testing. “Stock” may not be the correct word however. Intel has gone as far as redesigning the heat sink for Quad-core CPUs. It has expanded in almost every direction; the increase in height is especially noticeable. To cool the processor, Intel has strapped-on a rather loud fan that spins at 5000 RPM.
Next Page »Installation, Overclocking
View as single page
Nov 22nd, 2024 16:05 EST change timezone

New Forum Posts

Popular Reviews

Controversial News Posts